Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
R 1 3 5Position of gear leverduring the setting operationLocating pinT10<strong>02</strong>72 4237_052Locating hole– To arrest the gear lever, follow thisprocedure:With the engine running at idling speed,locate the gear lever in the gate of the 1st/2nd gear.The gear lever has a locating hole. Insert thelocating pin T10<strong>02</strong>7 through this bore andinto the hole below it in the selector housing.Selector housing237_050– To fix the selector cables in position, followthis procedure:The locking mechanism on the gate selectorcable and on the gear selector cable can nowbe turned clockwise.The spring presses the locking mechanism intothe set position and secures it.Afterwards, detach the angle piece againand pull out the locating pin.The gear lever should now be in the gate ofthe 3rd/4th gear, with the engine running atidling speed.237_05123
Change language