Part 02 - Volkspage

ServiceAdjusting the cable-operatedgearboxAdjustment of the cable-operated gearbox hasbeen simplified by an angle piece on the selectormechanism cover and a locating pin for the gearlever.Gear selectorcableGate selectorcableThe adjustment always begins when the gearboxis in the neutral position:– To detach the selector cables, follow thisprocedure:112Draw the locking mechanism at the gearselector cable and at the gate selector cableforwards as far as the stop. 1 Afterwards,engage locking mechanism by turninganticlockwise. 2 The selector cables can nowbe adjusted for length.2237_048– To arrest the selector shaft, follow thisprocedure:An angle piece which locates the selectorshaft is fixed to the selector mechanism cover.To locate the selector shaft, press down theselector shaft by hand in the gate for 1st/2ndgear. When you press down the selectorshaft, 1 press the angle piece towards theselector shaft 2 and then rotate in directionof arrow. 3 It engages and locates theselector shaft in this position.231237_049Angle pieceSelectormechanism cover22