installation - Drolet

More documents

Recommendations

Info

ASSEMBLYBALTICPedestal Base Installation:1. Slide the front part of the pedestalbase around the pedestal and fixthe rear part with the two suppliedscrews.2. Slide the ash pan in position.Side Panels and Ash Lip Installation:3. Start by fixing the front part of thedecorative side in the two clipswelded on the sides of the fire box.4. Then, fix the back of the decorativeside with two screws and washerssupplied. Line up the decorativeside parallel to the side of theappliance.7
Page 3 and 4: INTRODUCTIONSBI INC., one of the mo
Page 5: *Why is the BTU indicated on the EP
Page 9 and 10: DOOR ADJUSTMENTIn order for your st
Page 11 and 12: CLEARANCES TO COMBUSTIBLES AND FLOO
Page 13 and 14: FLOOR PROTECTORIf the stove is to b
Page 15 and 16: Graphic 1A- Minimum clearance requi
Page 17 and 18: A- 1 in. (25 mm) minimum;Graphic 51
Page 19 and 20: CHIMNEY CONNECTORYour chimney conne
Page 21 and 22: DRAFTYour E.P.A Drolet stove’s pe
Page 23 and 24: MASONRY CHIMNEY:You can also instal
Page 25 and 26: BRICK THIMBLE:25
Page 27 and 28: WOODSTOVE UTILISATIONYour heating u
Page 29 and 30: HEATINGControlled combustion is the
Page 31 and 32: USE OF THE BYPASS DAMPERYour stove
Page 33 and 34: MAINTENANCEYour Drolet stove is a h
Page 35 and 36: BRICK LAYOUTITEM PART # DESCRIPTION

installation - Drolet

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?