R116 Heavy Duty Dense Graded Asphalt - Aapaq.org

(RMS COPYRIGHT AND USE OF THIS DOCUMENT - Refer to the Foreword after the Table of Contents)R116Heavy Duty Dense Graded AsphaltClauseCharacteristic2.1.4 Filler in asphalt – Drycompacted voids2.1.4 Filler in asphalt – Methyleneblue valueTable R116/L.3 – Asphalt ProductionTest Method /ProcedureAS 1141.17RMS T659Minimum Frequency of TestingOne test with each nominated mixsubmissionOne test with each nominated mixsubmission2.2.1 Binder content AS 2891.3.1 As per Table R116/L.12.2.1 Combined particle sizedistribution2.2.2 Ratio of % passing 0.075 mmAS sieve to binder contentAS 2891.3.1AS 2891.3.1As per Table R116/L.1As per Table R116/L.12.2.2 Binder film index AS 2891.8 One test with each nominated mixsubmission2.2.2 VMA and air voids in laboratory RMS T662 As per Table R116/L.1compacted mix (120 cycles)AS 2891.7.1 orAS 2891.7.3AS 2891.8AS 2891.9.22.2.2 Air voids in laboratoryRMS T662 1 per asphalt production Lotcompacted mix (350 cycles)AS 2891.7.1 orAS 2891.7.3AS 2891.8AS 2891.9.22.2.3 Moisture content RMS T660 As per Table R116/L.12.2.4 Tensile Strength Ratio RMS T640 One test for up to 2,000 tonnes or partthereof and thence one test per 5,000tonnes or part thereof of the productionmix2.2.5 Resilient modulus AS 2891.13.1 One test with each nominated mixsubmission (if specified in AnnexureR116/A)2.2.6 Deformation resistance AG:PT/T231 One test with each nominated mixsubmission (if specified in AnnexureR116/A)2.4.5 Production temperature ofasphaltYourdocumentedprocedure2.4.5 Despatch temperature of asphalt YourdocumentedprocedureAs specified in PQPEach delivered load38 Ed 8 / Rev 3