perf T&F re perf T&F re

new 2007 economy ‘1U’ lineinstrumentsQuartzlock instrumentsQuartzlock E5000 SPECIFICATION Quartzlock Low phase noise • low drift • high stabilityCompleteOutput Low A Fully phaseSpecified, noise • low AccuracyQuartzlock new 2007 economy drift 1–20MHz • high‘1U’ stabilityLow phase noise • lowdrift • stability lineLow Cost DistributionPhase to NoiseAmplifier(SSB)Quartzlock instrumentsphase noiseFrequency• low drift • high stabilityQuartzlock Quartzlock Quartzlock 10MHz • -165 dBc/Hz Input Power phase noise • 1 x 10 -12 /sControl10MHz• -165 dBc/HzSolutionsn Comprehensive Specification13Wphasen Excellent Short Term Stability & Phase noise Noise • 1 x 10 -12 /s Quartzlock Input 10MHz • -165 dBc/HzVoltage Rangephase noise • 1 x 10 -12 90-240V acn 1MHz – 20MHz Bandwidth/sQuartzlocklowest Low phase noisecost• lowtodrifthighest• high stabilityQuartzlock 10MHz • -165 dBc/Hz phase noise • 1 x 10 -12 /s Quartzlock Quartzlock Up to 24 outputs from 1 or 2 inputsperformance Up to 24 outputs from 1 available2 inputsExternal trim range to:Quartzlock Up tocontrol/calibrate/referenceQuartzlock 24 outputs from 1 or 2 inputsThe E5000 Distribution Amplifier is a Short 1U Rack term Mount stability unit. The E5000 allows a cost and space 3x10 -11 /1s10MHz Up to 24• outputs -165 dBc/Hz from 1phase or 2 inputs noise • 1 x 10 -12 /s Quartzlock outputs of the same frequency. spectrum Quartzlockanalysers, network analysers, frequencycounters, Features signal sources, microwave Benefits analysers, Harmonicsdigital • Compact design• Unity Gain storage A4000 scopes. Second HarmonicRF Switch Unit • -115dBc/Hz @ 1Hz phase noise• 0dBm to 10dBm input• 90dB @ 10MHz IsolationRedundant ThirdRF Harmonic • HighSwitchStabilityUp with toRS232 24 outputs i/o NMEA fromNTP, 1 orlock 2 inputs adviceUnitetc.• High IsolationAccurate Foruseusewithwith & Stable RbRbandand Low GPSGPS Noise referencesFrequency Drift• referencesLow Distortion10MHz RubidiumReference A4000 Redundant signals. 10 -12 RF to 10 Switch -14 accuracy Unit & stabilitylevels & _ 125dBc/Hz @ 1Hz or _ 178dBc noise floor.ApplicationsQuartzlock A4000 Redundant StatusRF MonitorsFor • Industrial use Calibration with Laboratories Rb and GPS references Switch Unit• TelecomsFor use with Rb and GPS references• Test SolutionsOperating Temp. Range• RF Test Benchfrom• Production Test Quartzlock can combine any of the aboveTemperature Coefficient (ambient) 3x10instruments Quartzlock into can a combine single 1U any unit of to the meet above-10 (-20° to 50°C£1000 engineStorage Temperature -40° to 70°Cspecified Quartzlock instruments requirements. can into combine a single any 1U unit of to £3000 the to above meetMTBF100,000 hoursQuartzlock instruments specified A4000 Redundant requirements.can into combine a singleRF Switch any 1U unit of 'use Unit the tofrommeet above the box'ConnectorsBNC RF & IEC line supply inputChoice For useof with technologies, Rb and GPS GPS references or Rb + _ clean up loop.Tel +44 (0)1803 862062Email sales@quartzlock.com10instruments Fax +44 (0)1803 867962 into a single 1U unit to www.quartzlock.com meetspecified requirements.Low phase noise • low10MHz sine 0.7V rms into 50 ohms±5x10 -11 at shipment @25°C-100dBc (10Hz-120 dBc (100Hz-140 dBc (1KHzWarm Time 5 minutes to lock @ 25°CRetrace ±3x10 -11Frequency Control Internal (external ask Quartzlock)Internal trim range (trimpot) greater than 2x10 -9greater than 2x10 -9 (0V~5Vefficient way to distribute reference frequencies throughout a system or lab with virtually no signaldegradation. The standard E5000 accepts input frequencies of 1MHz to 20MHz and provides twelveSize51x10 -11 /10s3x10 -12 /100s/hour/day-48 dBc-45 dBc3x10 -12 /day, 3x10 -11 /monthLock and On LED-20°C to +50°C19” Rack 1 U (44mm/1.75”