ARB 4x4 ACCESSORIES - CARiD.com
ARB 4x4 ACCESSORIES - CARiD.com
ARB 4x4 ACCESSORIES - CARiD.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
27. Using holes in chassis mountassembly as a template, drillthrough crossmember on bothsides using 10mm drill bit.Warning: Drilling operations can result in flyingmetal debris, safety glasses should be worn.28. Also drill through top of mountinto vehicle crossmember,making sure that you are drillingperpendicular.Warning: Drilling operations can result in flyingmetal debris, safety glasses should be worn.29. Fit packer in between mountassembly and vehiclecrossmember and align with thetwo holes.Viewed from above on LHS of vehicleLast Rev Date: 19/04/06 Page 10 of 22 Fitting instructions# 3783216Copyright © 2005 by <strong>ARB</strong> Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of <strong>ARB</strong> Corporation Ltd
Change language