ARB 4x4 ACCESSORIES - CARiD.com
ARB 4x4 ACCESSORIES - CARiD.com
ARB 4x4 ACCESSORIES - CARiD.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. To remove bumper bar wherethe inner guard is attached, pushplastic pin inward , then pull outplastic retainer clip. Remove foglights and fog light adjuster andthe black plastic grommets frombumper.4. To remove headlights fromvehicle for ease of joining indicatorlooms and extending fog lightlooms, firstly lift plastic cover fromabove headlight and undo oneplastic retaining clip and three6mm bolts, then remove headlights.5. After removing headlights fromvehicle, remove some of the blueinsulating tape from vehicleindicator and parking looms toexpose wiring to be able to fitconnectors.Last Rev Date: 19/04/06 Page 5 of 22 Fitting instructions# 3783216Copyright © 2005 by <strong>ARB</strong> Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of <strong>ARB</strong> Corporation Ltd