System MG 900 and MG 930 - Schlatter

Schlatter_MG900_EN 16.5.2007 11:59 Uhr Seite 7
System MG 900
MG 900 for the production of cable tray mesh
in double-track production, with automatic
line wire feeding from coil through an integrated
straightening and cutting unit, System
Syrocut and loading with a single gaptype
line wire loader, travelling accross the
line wire magazines. With automatic cross
wire feeding from coil through two integrated
straightening and cutting units, System
Syrocut and loading with a gap-type cross
wire feeder. With programmable linear pullout
for the production of meshes with variable
and accurate cross wire spacings. With
pneumatic, programmable cross wire trimming
station, double track operation.
MG 900 as described above, with coil pay-
off units in the foreground.
MG 900 for larger mesh panels (max. 3600
mm length and max. 2400 or 2800 mm
width) with automatic line wire loading system,
with single gap-type line wire loader.
Line wire feeding with steplessly adjustable
line wire magazines, welding machine with
pneumatic weld presses, cross wire disctype
feeder, programmable linear pull-out
for the production of mesh with variable
and accurate cross wire spacings.
MG 900 for the production of precision mesh
panels with narrow wire spacings and mini-
mal distortion, with semi automatic line
wire loading, welding machine with pneumatic
weld presses, direct current welding,
single gap-type cross wire feeder, cross
wire clamping and stretching unit and linear
pull-out for the production of meshes with
variable and accurate cross wire spacings.