Proposed Fire Alarm System with Combination Smoke ... - BC Housing

More documents

Recommendations

Info

Generic Specification for BCH Proposed Fire Alarm System for Construction: SECTION 16000Option A – Sounder Base Releases Audible Signal within Suite of OriginOption B – Future Provision for the Capability to Remotely Disengage Sounder Base inDesignated SuitesReference: CFT Engineering Report C5843_R01Rev01, Dated May 28, 2008 and Revised July 16, 2008,Henceforth Referred to as CFT Reporta) All interruptions of existing fire alarm services are to be coordinated with the FireDepartment through the building owner and to be effected only as directed by the buildingowner.10.0 PREMIUM TIMEa) Include cost of premium time in tender price for work during nights, weekends, or othertime outside normal working hours necessary to maintain all fire alarm services inoperation.11.0 CONDUITa) Provide steel galvanized conduit (EMT) in ceiling spaces and service spaces. All conduitsto be concealed, except for electrical rooms. BX may be used where the engineer prior toinstalling has defined locations.b) Support multiple runs of conduit on channel with rod hangers.c) Provide conduit expansion joints where conduits cross building expansion joints, and instraight runs of conduit 30 m (100 ft.) or longer.d) Size conduits as per C.E.L. and provide larger sizes where noted.e) All conduits are to be tested for clear bore.f) All conduits routed in concrete slabs are to have an appropriately sized groundingconductor pulled in with the normal circuit conductors. All conduits in grade level slab areto be rigid PVC type conduit, securely fitted together.g) “Wire mold” is to be used for all exposed areas unless otherwise noted.12.0 WIRE AND CABLEa) All wiring is to be in conduit unless otherwise noted. All wiring is to be copper and sizedto the fire alarm manufacture’s recommendation and C.E.L.13.0 ACCESS PANELS AND DOORSa) Provide access panels or doors to allow ready access to all concealed electrical junctionboxes and/or products requiring adjustments or maintenance.14.0 FIRE ALARM PANELa) Panels are to have doors with concealed hinges and combined lock and latch.b) Central Alarm Control Facility is to be installed not higher than 1.8 m from finishedfloor to user functions as per CAN/ULC-S524-01-Section 4.4.3.Page 6 of 7
Generic Specification for BCH Proposed Fire Alarm System for Construction: SECTION 16000Option A – Sounder Base Releases Audible Signal within Suite of OriginOption B – Future Provision for the Capability to Remotely Disengage Sounder Base inDesignated SuitesReference: CFT Engineering Report C5843_R01Rev01, Dated May 28, 2008 and Revised July 16, 2008,Henceforth Referred to as CFT Report15.0 SEISMIC RESTRAINT NOTESa) All fire alarm equipment shall be braced or anchored to resist horizontal force acting inany direction.b) Provide all required seismic bracing, supports, bolts, washers, nuts, etc. for all fire alarmbatteries and panels.16.0 TRAININGa) Training of building staff until staff are sufficiently trained to be included within pricing.b) Training to be on-site using on-site equipment.17.0 EQUIPMENTa) Standardized access key to the fire alarm panel and pull stations.b) Web based program to remotely view the fire alarm and smoke/heat (rate of rise)combination detector panel.END OF SECTIONPage 7 of 7
Page 3 and 4: Technical Bulletin No 22-2009Propos
Page 5 and 6: TECHNICAL BULLETIN NO. 22-2009Date
Page 7: Technical Bulletin No 22-2009Propos
Page 45 and 46: Generic Specification for BCH Propo
Page 47 and 48: Generic Specification for BCH Propo
Page 49: Generic Specification for BCH Propo
Page 53 and 54: CITY OF VANCOUVEROFFICE OF THE CHIE
Page 55 and 56: For office use onlySTAFF COMMENTS A
Page 57: Trouble SignalsAlarm SignalsFire Al

Proposed Fire Alarm System with Combination Smoke ... - BC Housing

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?