Gates Industrial Hose - Wright, F. B.

75 Gates GLX ®COUPLINGS FOR GATES HOSE - continued79 Holedall Permanent Swaged – Long StyleACID-CHEMICALMale PipeDescription: One piece staked ferrule design. Smooth ferrule IDdesigned for textile reinforced hoses. Male and female pipe, female JIC37˚ flare swivel and male and female SAE 45˚ flare terminations.TuffCoat plated steel for 400 hour red rust corrosion protection(SAE-J516 and ASTMB-117 salt spray conditions).Sources: Gates Corp.76 Permanent Crimped SteamFemale SwivelDescription: Patented Holedall couplings include a Holedall stemand specially engineered ferrule. This multi-purpose, high-pressurecoupling system requires no bolts and results in a clean couplingwith no protrusions.Sources: Dixon Valve & Coupling Co.80 Gates GSP ®AIR ANDMULTI-PURPOSEFOOD ANDBEVERAGEMARINEMATERIALHANDLINGMale PipeDescription: Permanently crimped steam hose couplings – FemaleViton ® Seal Ground Joint or Male NPT Thread. Precision metal tometal contact with a Viton seal provides leak-free performance.Streamlined permanently crimped ferrule eliminates protruding boltsthat require retightening and can catch on equipment or cause injury.Sources: Campbell Fittings, Inc.77 Gates GSH with Integral 2” Fig. 1502Hammer UnionsDescription: One piece, no skive, staked ferrule design. Stem terminationsare integral (not Welded) mating male or female Fig. 1502hammer union subs. The male sub is supplied with a hammer unionnut. The female sub is supplied with a rubber lip seal.Sources: Gates Corp.78 Crimp SleevesFemale Ground JointDescription: Two piece, no skive design engineered for high-pressure,high-impulse applications. TuffCoat ® plated steel for 400 hour red rustcorrosion protection (SAE-J516 and ASTMB-117 salt spray conditions).Sources: Gates Corp.81 Gates GLDescription: One piece staked ferrule design. Smooth ferrule IDdesigned for textile and helical reinforced transfer hoses. Male andfemale pipe, male and female JIC 37° flare and male and femaleSAE 45° flare terminations. TuffCoat plated steel for 400 hourred rust corrosion protection (SAE-J516 and ASTMB-117 salt sprayconditions).Sources: Gates Corp.82 Gates SSMININGOILFIELDPETROLEUMTRANSFERPRESSUREWASHERSTEAMWATERDescription: Available in plated steel, 316 stainless steel and aluminum.Suitable for replacing band clamps when using pin lug,combination nipple or cam and groove stems. Working pressuresare determined by the type of couplings and hose used.Sources: APGCampbell Fittings, Inc.Dixon Valve & Coupling Co.P-T Coupling Co.Description: Two piece, no skive design. Made of stainless steel forhigh corrosion resistance.Sources: Gates Corp.CLAMPSCOUPLINGSANDFERRULESHOSE FINDERCHEMICALRESISTANCETABLE®Powering Progress.gates.com/industrialhose171