Gates Industrial Hose - Wright, F. B.

GATES INDUSTRIAL HOSE PRODUCTS1. Hand Built Hose – Wire and Nonwire (W and SB)Size (ln.) I.D. (ln.) O.D. (ln.)3/4 and under ± .031 ± .031Over 3/4 through 2 ± .031 ± .063Over 2 through 3-1/2 ± .047 ± .063Over 3-1/2 through 4 ± .063 ± .063Over 4 through 6-5/8 + .063 + .125- .250 - .2502. Vertical Braid Hose (B) & Spiral HoseSize (ln.) I.D. (ln.) O.D. (ln.)3/16 ± .023 ± .0311/4 through 3/4 ± .031 ± .0311 through 1-1/2 ± .063 ± .0633. Horizontal Braid Hose (HB and HW)Size (ln.) I.D. (ln.) O.D. (ln.)1/4, 5/16, 3/8 ± .016 ± .0311/2, 5/8, 3/4 ± .023 ± .0311 ± .031 ± .0311-1/4, 1-1/2 ± .039 ± .0472 ± .039 ± .0632-1/2, 3 ± .047 ± .0633-1/2, 4 ± .063 ± .063ARPM TOLERANCESARPM Tolerances4. Specified Cut Length of Hose*Length (ln.)Tolerance (ln.)12 and under ± .125Over 12 through 24 ± .188Over 24 through 36 ± .250Over 36 through 48 ± .375Over 48 through 72 ± .500Over 72 ± 1%*Helix wire hoses which can be coiled can appearshorter than the factory cut length. This phenomenonis normal, and the hose(s) will return to the factorycut length upon initial pressurization.5. Made-To-Order HosesWire-Inserted Construction, GatesLength (Ft.)Tolerance (ln.)up to 5 ± 15 to 10 + 2, -110 to 25 ± 2over 25 ± 1%How to Measure Hose Lengths and AssembliesLUncoupledLCoupled or Coupled and FlangedHose or hose assembly lengths (“L”) are measuredas shown above, unless otherwise specified.18gates.com/industrialhoseGates Corporation