Specifications

Catalog PCC-2/USABasic FeaturesAccessoriesMounting AccessoriesIndexMOUNTINGON DIN RAILSuitable for various uses, the rails shownon the right all are conform to standardsNF, DIN, EN: width 35 mm, latching groovethickness 1mm.They are therefore suitable for the simpleclip-on mounting of all standardcomponents.35mmElectricalElectronicor PneumaticComponents1mm1mmMOUNTINGIN ENCLOSUREWhen pneumatic components generatedhumid exhausts, they had to be separatedfrom electrical components, and a specialpneumatics enclosure was necessary.Now that the exhaust is captured and/orthe air is dry, it has become moreeconomical to locate the electromechanical,electronic, and pneumaticcomponents in the same enclosure: theassembly is more compact, the connectionsare shorter, the component positionsand their referencing are more logical, thusfacilitating any interventions.The Grid SystemVery familiar to electricians, the systemincludes the enclosures, the mounting plates,the rails and all the installation andwiring accessories for the three technologies:electromechanical, electronic andpneumatic.AccessMOUNTINGIN A CONTROL STATIONThe pneumatic push-buttons presentedhave the same operating heads as electricalpush-buttons.Because of this, their installation in controlpanels or control stations is exactly thesame :- same mounting centers;- same cutout Ø..866 (22)DiameterPneumatic2Parker Hannifin CorporationPneumatic DivisionRichland, Michigan