HX5116-A - Display Future

HX5116-A160CH Single Chip Driver for LTPS AMOLEDDATA SHEET Preliminary V03RegisterAddressOTP registerRegister name Default Read/Write Description0x00 R_SLOPE 0x43 R/W0x01 G_SLOPE 0x43 R/W0x02 B_SLOPE 0x43 R/W[7:4] Red color GAMMA slope 1 correction0000: VR0 - 6%…….0100: VR0 + 0% (default)…….1111: VR0 + 20%[3:0] Red color GAMMA slope 2 correction0000: VR255 - 54%…….0011: VR255+ 0% (default)…….1111: VR255 + 195%[7:4] Red color GAMMA slope 1 correction0000: VG0 - 6%…….0100: VG0 + 0% (default)…….1111: VG0 + 20%[3:0] Red color GAMMA slope 2 correction0000: VG255 - 54%…….0011: VG255 + 0% (default)…….1111: VG255 + 195%[7:4] Red color GAMMA slope 1 correction0000: VB0 - 6%…….0100: VB0 + 0% (default)…….1111: VB0 + 20%[3:0] Red color GAMMA slope 2 correction0000: VB255 - 54%…….0011: VB255 + 0% (default)…….1111: VB255 + 195%[5:0]: VRH5-0 Set the magnification of amplification forVGAM1OUT voltage. (reference voltage for grayscale voltage)If GAMV = 0 :000000: 4.8V * (1-0.5%*32) V100000: 4.8 V * 1 (default)111111: 4.8V * (1+0.5%*31) VUnit : 0.5%0x03 VGAM1_LEVEL 0x00 R/WWhen VCI≧3.0V, please set VRH to VGAM1OUT=4.8V.When VCI< 3.0V, please set VRH to VGAM1OUT =4.6V.If GAMV = 1 :000000: 5.8V * (1-0.5%*32) V100000: 5.8V * 1 (default)111111: 5.8V * (1+0.5%*31) VUnit : 0.5%Set VRH to VGAM1OUT = 5.8V.Himax ConfidentialThis information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosedin whole or in part without prior written permission of Himax.-P.39-July, 2007