Model SR4300 User Guide AV Surround Receiver - Marantz

More documents

Recommendations

Info

SETUPAfter all components are connected, initial setup must be performed.SETUP MENU SYSTEMThe SR4300 incorporates an menu on the front display, which makesvarious operations possible by using the cursor ( , , , ) and OKbuttons on the remote control.ENGLISHMENU STRUCTUREMain Menu1. INPUT setup2. SPEAKER setupCDTAPECD-R (CD-R/MD)TVDSS (DSS/VCR2)DVDVCR1Speaker Size SetupSUBW (Subwoofer)L&R (Front Left&Right)CENTERSL&SR (Surround Left&Right)SURR.B (Surround Back)D1 AUTO / D2 AUTO/D3AUTO / D4 AUTO(DigitalAUTO mode)DIG.1 / DIG.2 / DIG3. /DIG4(Digital Fixed mode)ANALOGYES / NONESMALL / LARGESMALL / LARGE / NONESMALL / LARGE / NONEYES / NONESpeaker Distance SetupL&R (Front Left&Right)C (Center)SLR (Surround Left&Right)SW(Subwoofer)SB (Surround Back)0.3m (1f) 9.0m (30f)0.3m (1f) 9.0m (30f)0.3m (1f) 9.0m (30f)0.3m (1f) 9.0m (30f)0.3m (1f) 9.0m (30f)Speaker Level SetupT.MODE(Test Tone Mode)L (Front Left)C (Center)R (Front Right)SR (Surround Right)SB (Surround Back)SL (Surround Left)SW (Subwoofer)MANU (Manual) / AUTO-10dB +10dB-10dB +10dB-10dB +10dB-10dB +10dB-10dB +10dB-10dB +10dB-15dB +10dB3. PREFERENCE setup4. PROLOGIC II setup5. CS II setupBASSMIXLFEPANORAMADIMENSIONC.WIDTH (Center width)TRUBASSSRS DIALOGBOTH / MIX0dB / -10dB / OFFOFF / ON0 60 70 60 66. 6.1CH IN setupL (Front Left)C (Center)R (Front Right)SR (Surround Right)SB (Surround Back)SL (Surround Left)SW (Subwoofer)-10dB-10dB-10dB-10dB-10dB-10dB-15dB+10dB+10dB+10dB+10dB+10dB+10dB+10dB7. SURROUND setupSurround ModeC (Center) LEVSL (Surround Left) LEVSR (Surround Right) LEVSB (Surround Back) LEVSW (Subwoofer) LEV-10dB-10dB-10dB-10dB-10dB-15dB+10dB+10dB+10dB+10dB+10dB+10dB19
ENGLISHENTER THE DESIRED MENU ITEM OF THESETUP MENU4.2.BASSSETUP/T.TONES-DIRECTTVDVDVCR1VCR2DSSTUNERMUTE7CDRMDTAPECDAMPM-CHSTF.DIRECTOKNIGHT8 9CHANNEL/SKIPSYSTEM REMOTE CONTROLLER RC4300SR1. Turn on this unit.2. Press the AMP button to set the amp mode.3. Press the MENU button or the OK button to enter the SETUPMENU.4. Press the or cursor button to select the MAIN MENU item.5. Press the OK button or the MENU button to enter the desiredmenu item.After finishing all setup, press the MENU OFF button to exit theSETUP MENU.02CHA/DOFFMENUVOLUMETUNE/SEARCHMODEDISP./RDSPTYP.SCANATT.6.1CH-INEXIT3.5.1. INPUT SETUP (ASSIGNABLE DIGITAL INPUT)Four digital inputs can be assigned as the desired source.Use this menu to select the digital input jack to be assigned to theinput source.The Input Setup consists of 9 items, which are as below.• D1AUTO to D4AUTO : Digital AUTO modeIf the input signal from the selected source is digital signal, this unitchooses a digital input automatically.• DIG.1 to DIG.4 : Digital FIXED modeThe SR4300 chooses a digital input regardless of a input signal fromthe selected source.• ANA : Analog modeUse this menu to select the digital input jack to be assigned to theinput source.4. 5.1. 3. 5.BASSSETUP/T.TONES-DIRECTMUTE7M-CHSTF.DIRECTOKNIGHT8 91. Select “1.INPUT” in SETUP MAIN MENU with the or cursorbutton.2. Press the OK button to enter the menu.3. Press the or cursor button to select the input source.4. Press or cursor button to select the input function.Select “DxAUTO”, “DIG.x” or “ANA” for input sources.5. If you finish these setup, press the or cursor button to select“TO MAIN MENU” then press the OK button to return the SETUPMAIN MENU.Or press the or cursor button to select “EXIT” then press theOK button to exit the SETUP MENU.Notes:• When a DTS-LD or DTS-CD is playing, this setup is notavailable. This is to avoid noise being generated from theanalog input.• If “Dx-AUTO” is selected and a DVD, compact disc or LD isfast forwarded during playback, decoded signals may produce askipping sound. In such cases, change the setting to DIGITAL.• Same digital input function cannot be set. In this case, theprevious setting is set to ANALOG. Same digital input numbercannot be set in Digital AUTO mode and Digital Fixed mode.For example, D1AUTO and DIG.1 are not set at same time.02CHA/DOFFMENUVOLUME6.1CH-IN2. 5.20
Page 1: RModel SR4300 User GuideAV Surround
Page 8 and 9: OKACCESSORIESRemote Controler RC430
Page 10 and 11: !2 PHONES jack for stereo headphone
Page 12 and 13: ⁄1 DIGITAL INPUT (Dig.1 - 4) / OU
Page 14 and 15: OK6.1CH-IN⁄6 Numeric buttons 1 to
Page 16 and 17: CONNECTIONSSPEAKER PLACEMENTThe ide
Page 18 and 19: CONNECTING AUDIO COMPONENTSCD RECOR
Page 20 and 21: SUBWOOFERSUBWOOFERADVANCED CONNECTI
Page 24 and 25: 2. SPEAKER SETUPAfter you have inst
Page 26: SPEAKERS LEVELHere you will set the
Page 29 and 30: ENGLISH7. SURROUND4. 5.BASSSETUP/T.
Page 31 and 32: ENGLISHVER SR43006.1CH-INA/DCLEAR M
Page 33 and 34: ENGLISHCIRCLE SURROUND II (CSII-CIN
Page 35 and 36: ENGLISHSTANDBYPOWER ON/STANDBYSURRO
Page 37 and 38: ENGLISHCLEAR MEMORYTUNING/PRESETF/P
Page 39 and 40: ENGLISHSTANDBYPOWER ON/STANDBYSURRO
Page 41 and 42: ENGLISHREMOTE CONTROLLER OPERATIONC
Page 43 and 44: ENGLISHTROUBLESHOOTINGIn case of tr
Page 45 and 46: ENGLISHSURROUNDAV SURROUND RECEIVER

Model SR4300 User Guide AV Surround Receiver - Marantz

Create successful ePaper yourself

Delete template?

Save as template?