12.07.2015 Views

Operating Instructions - Panasonic FTP

Operating Instructions - Panasonic FTP

Operating Instructions - Panasonic FTP

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

2. Functions in each area2-1-6. Positioner area Positioner [X/Y]These are used when performing the settings below. PinP1, PinP2 position settings Wipe start position setting (WIPE #5, WIPE #11, SQ #5) Camera control Flying key position setting Chroma key marker position settingPOSITIONERZIn each case, the settings take effect only when the following menu items have been selected.NoteThe center values of the positioner are set during the time it takes for the unit to start up after its power isturned on. Do not operate the positioner until after the switcher has started up. Rotary encoder [Z]This is used to set the PinP size, flying key size or to select the chroma key area.In each case, the settings take effect only when the following menu items have been selected.PositionerRotary encoderX/Y Z SwitchPinP1, PinP2 Position adjustments Size adjustments(size increased by rotatingthe encoder clockwiseand reduced by rotating itcounterclockwise)WIPE (BKGD)WIPE (KEY)Chroma keyRotation angleadjustments(X-direction andY-direction rotation)Start positionadjustmentsStart positionadjustmentsSelection positionadjustmentsRotation angleadjustments(Z-direction rotation)Hold switch down torestore initial values(X/Y, Z).Hold switch down torestore initial values(X/Y, Z).— Hold switch down torestore initial values(X/Y).— Hold switch down torestore initial values(X/Y).Selected area sizeadjustments(size increased by rotatingthe encoder clockwiseand reduced by rotating itcounterclockwise)Flying key Position adjustments Size adjustments(size increased by rotatingthe encoder clockwiseand reduced by rotating itcounterclockwise)Camera controlX: Pan control or focuscontrolY: Tilt control or zoomcontrolExecute samplingHold switch down torestore initial values(X/Y, Z).— Switching betweenpan/tilt control andzoom/focus controlValid menuAll PinP1 and PinP2menus (except forPinP1, PinP2/Rotation)PinP1, PinP2/RotationBKGD/WIPEPosBKGD/SQPosKEY/WIPEPosKEY/SQPosCHR KEY/Sample1CHR KEY/Sample2KEY/FlyKEYAll menus other thanthose listed above27

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!