ISOVER Passivhaus Engl.
ISOVER Passivhaus Engl.
ISOVER Passivhaus Engl.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The Ecological Import.<br />
Energetic, visual and fina<br />
128 <strong>ISOVER</strong><br />
mineral-based thermal<br />
In order to achieve the passive house<br />
standard, the outer wall must have a<br />
heat transition coefficient of<br />
U � 0.15 W/m2K. Depending on the<br />
heat-insulating properties of the<br />
load-bearing outer walls and on the<br />
thermal conductivity of the insulation<br />
material used, it may be necessary to<br />
install an external thermal insulation<br />
system of up to 40 cm thickness.<br />
Modern external thermal insulation<br />
composite systems (ETICS) based on<br />
mineral raw materials combine best<br />
insulating properties with ease of<br />
handling. Compared to conventional<br />
insulation systems, the additional<br />
expense pays off after only a few<br />
years, thus enabling house owners to<br />
save a lot of money in the long run<br />
and go easy on our environment.<br />
Good for the outdoor<br />
and good for the indoor<br />
climate.<br />
Especially the completely mineralbased<br />
insulation systems of Saint-<br />
Gobain Weber are ideally suited for<br />
passive homes. This is due to their<br />
"natural" origin as well as their<br />
high-quality composition. All components<br />
of the external thermal