youngAmericababy™ - Stanley Furniture

CAUTION: Any mattress in this crib must be at least 27- 1 /4 " by 51- 5 /8 " with athickness of no less than 5 inches and not exceeding 6 inches.MATTRESS5"MINIMUM THICKNESS6"MAXIMUM THICKNESSCRIB SPRING FRAMEOperating Drop-Side1. Lift drop-side rail up.2. Using the side of your leg, apply pressure to the bottom railof the drop-side gently toward the inside of the crib until you feel the locking mechanism release.3. Lower drop-side.4. To raise the drop-side, pull up on the drop-side rail. You will hear a click when it automatically locks into position.Maintaining Drop-Side1. Periodically check to make certain all screws are fastened securely..2. Check frequently that the crib spring brackets attached to the spring frame are securely attached to stabilizer rails.3. If you are missing a part or need a replacement part, do not use substitute parts. Ask your dealer for replacement parts or contactCustomer Service at (276) 627-21004. The spring adjustment bracket allows for the mattress to be lowered as your child grows. When your child reaches a height of 35 inches,or can climb out of the crib, you should place the child in a youth or regular bed.5. Save this instruction sheet in the event you disassemble the crib and need to reassemble it. This instruction sheet will also be usefulin identifying replacement parts if needed at a future date.youngAmericababyA trademark of Stanley Furniture Company, Inc.14