Machine Readable Travel Documents - ICAO

More documents

Recommendations

Info

Part 3. Machine Readable Official Travel Documents — Volume 1 Section V. Technical specifications — Size 1 MRtds V-15 2.0 (0.08) 2.95 (0.12) 4.0 (0.16) APPENDIX 3 to Section V SCHEMATIC DIAGRAM OF MACHINE READABLE ZONE OF A SIZE-1 MRTD WITH MINIMUM MANDATORY FORMAT (td1) 2.0 (0.08) Nominal dimensions in millimetres (inch dimensions in parentheses) Machine reading zone Reference centre line 77.7 (3.06) 84.85 (3.34) Rear of td1 Printing zone 2.0 (0.08) Upper Middle code line Lower 4.23 (0.167) 4.23 (0.167) Not to scale Note.— For illustrative purposes, the smallest option for the 85.6 mm (3.37 in) dimension of the td1 and the smallest option for the left-hand margin in the MRZ have been selected. 11.5 ± 1.0 (0.45 ± 0.04) 23.2 ± 1.0 (0.91 ± 0.04)
V-16 Machine Readable Travel Documents Notes.— Example 1 Example 2 APPENDIX 4 to Section V NOMINAL POSITIONING OF ZONES I – V ON FRONT OF td1 (showing alternate sizes of Zone V) 54.0 ± 0.75 (2.13 ± 0.03) 54.0 ± 0.75 (2.13 ± 0.03) 6.0 (0.24) Zone V Max 35.0 (1.38) Zone V Max 35.0 (1.38) 85.6 ± 0.75 (3.37 ± 0.03) 85.6 ± 0.75 (3.37 ± 0.03) Top edge of td1 Zone I Zone II Zone III Zone IV Top edge of td1 Zone I Zone II Zone III Zone IV Not to scale Max 11.0 (0.43) Max 11.0 (0.43) Nominal dimensions in millimetres (inch dimensions in parentheses) 1. Though the portrait is defined as a rectangular area, the actual representation of the holder may have irregular edges or have no background. 2. When the portrait is a photograph affixed to the td1 and protected by a laminate, the photograph should be positioned a further 4.0 mm (0.16 in) to the right so that it is at least 6.0 mm (0.24 in) from the edge of the document. This is illustrated by the shaded area in Example 1. 3. Example 2 indicates the maximum area available for Zone V if an issuing State wishes to have both a portrait and an adjacent second identification feature. Zone 1 is then reduced in size.
Page 1 and 2:
Doc 9303 Machine Readable Travel Do
Page 3 and 4:
Published in separate Arabic, Chine
Page 6 and 7:
FOREWORD The third edition of Doc 9
Page 8 and 9:
TABLE OF CONTENTS Foreword ........
Page 10 and 11:
Part 3. Machine Readable Official T
Page 12 and 13:
Acronym Full form AFS Anti-fraud sp
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
I-2 Machine Readable Travel Documen
Page 22 and 23:
II. TECHNICAL SPECIFICATIONS FOR MA
Page 24 and 25:
III. TECHNICAL SPECIFICATIONS FOR T
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45: IV. TECHNICAL SPECIFICATIONS COMMON
Page 46 and 47: Part 3. Machine Readable Official T
Page 80 and 81: V. TECHNICAL SPECIFICATIONS UNIQUE
Page 102 and 103: VI. TECHNICAL SPECIFICATIONS UNIQUE
show all

Machine Readable Travel Documents - ICAO

Create successful ePaper yourself

Delete template?

Save as template?