IKA® magic LAB

IKA ® magic LAB ®Module Colloid Mill / Cone Mill (MK/MKO)MustardInletclamp ¾”FunctionalityOperating unitIndication of theoperating data:ModuleSpeedTorqueTemperatureTimerTooth pasteOutletclamp ½”Heating/coolingconnectionSpicesCough mixtureSiliconeWhen is a mill used?For wet or fine milling of hard and granular raw materials,and for the production of finest emulsions and pastes.The MK-module (Colloid Mill)consists of two cones with different flowchannels on their surfaces. The cones can beshifted one against the other to a minimumdistance, thus changing flow and friction.By adjusting the milling gap you can thendetermin the particle size.The MKO-module (Cone Mill)Spice pasteTool kit MK / MKO1is working according to the same principle asthe MK-module. Neverthless, the outlet areaof its cones has a non-abrasive, rough andfine pored surface. This results in an enlargedfriction surface that enables to produce evenfiner suspensions at reduced flow. Furthertechnical details are the same as for moduleMK.Alumina5 524 31 mixing chamber, complete2 rotor3 distance sleeve4 locking nut5 clampMedicines8