DIESEL ENGINE EMISSIONS LEGISLATION: THE ... - Sauer-Danfoss

Sauer-Danfoss Emissions Solutions
While the initial purchase cost increases (76 Euro, in the example below), this cost is more than offset by the reduction in annual
fuel usage (1200 Euro in the example):
Installed cost increases by
76 Euro
Annual fuel cost decreases
by over 1200 Euro
Perhaps most importantly, the design engineer now has an additional solution to offset the challenges (increased heat load,
reduced power available) presented with Tier IV/Stage IV compliant diesel engines.
Sauer-Danfoss has developed a hydraulic circuit cost analysis tool to assist the design engineer in addressing these new criteria.
This tool provides the vehicle design engineer the ability to consider variables like:
• machine usage
• fuel costs
• hydraulic circuit line lengths
• hydraulic circuit conduit diameters
• flow rates
• oil viscosities
All of these considerations can be taken together to achieve an effective balance between cost, efficiency, and total cost of
ownership.
Contact your Sauer-Danfoss representative for more information on this tool and a demonstration on the many ways it can be
used to help solve your design challenges.
Hydraulic Circuit Design Criteria Page 2 of 2 www.sauer-danfoss.com/emissions