Victaulic General Catalog

CouplingsCOUPLINGSQuickVic ® RigidCouplingSTYLE 107HFor Complete InformationRequest Publication 06.21• Installation-ready design• Angled-pad design for rigidity• Pressure rated up to580 psi/4000kPa• Sizes from 2 – 8"/50 – 200mmNominalSizeInches/mmSizeActualOutsideDiameterInches/mmAllow.Pipe EndSep. † @ Bolt/Nut Dimensions Inches/mmInches/mmNo. – SizeInches/mmPreassembled(Installation-readycondition)Joint AssembledX Y X Y ZApprox.Wgt. Each2 2.375 0.153.87 5.75 3.63 5.63 1.97 2.12 – 3/8 x 21/250 60.3 3.8 98.3 145.9 92.3 142.9 50.0 0.952 1/2 2.875 0.154.37 6.26 4.15 6.15 1.97 2.52 – 3/8 x 21/265 73.0 3.8 111.0 159.1 105.5 156.3 50 1.176.1 mm3.000 0.152 – M10 x 21/24.43 6.39 4.25 6.28 1.97 2.476.1 3.8 112.6 162.2 107.9 159.5 50 1.093 3.500 0.154.95 7.36 4.71 7.24 1.97 3.12 – 1/2 x 380 88.9 3.8 125.7 186.8 119.8 184.0 50 1.44 4.500 0.155.97 8.39 5.73 8.29 2.04 3.92 – 1/2 x 3100 114.3 3.8 151.6 213.2 145.6 210.4 51.8 1.8139.7 mm5.500 0.152 – M12 x 37.11 9.6 6.9 9.44 2.09 5.0139.7 3.8 180.6 243.9 175.4 239.9 53.1 2.275 5.563 0.157.17 9.72 6.96 9.63 2.09 5.12 – 1/2 x 3125 141.3 3.8 182.1 246.9 176.9 244.6 53.1 2.36 6.625 0.155/8 x 3 1/4 8.31 11.32 8.13 11.23 2.04 6.8150 168.3 3.8 2 – M16 x 3 1/4 211.1 287.5 206.6 285.3 51.8 3.18 8.625 0.2210.57 13.56 10.32 13.44 2.55 10.52 – 5/8 x 4200 219.1 5.6 268.6 344.3 262.2 341.3 64.8 4.7† The allowable pipe separation dimension shown is for system layout purposes only. Style 107H QuickVic rigidcouplings are considered rigid connections and will not accommodate expansion or contraction of thepiping system.@ Number of bolts required equals number of housing segments.WARNING: Depressurize and drain the piping system before attempting to install, remove or adjust any Victaulicpiping products.Lbs/KgYXSTYLE 107H PRE-ASSEMBLED(INSTALLATION-READY CONDITION)YXSTYLE 107H JOINT ASSEMBLEDZZANSI STANDARDNominalInches/mmSize Schedule 10 Schedule 40Max. *ŧ Max. *Max. *§ActualJointPermis.JointOutside Diameter Wall Thick. Work.End Wall Thick. Work.Inches/ Inches/Press.LoadInches/Press.mmmmpsi/kPa Lbs./Nmmpsi/kPaMax. *Permis.EndLoadLbs./N2 2.375 0.109 600 2658 0.154 750 332350 60.3 2.77 4135 11823 3.91 5170 147802 1/2 2.875 0.120 600 3895 0.203 750 486965 73.0 3.05 4135 17325 5.15 5170 216583 3.500 0.120 600 5773 0.216 750 721680 88.9 3.05 4135 25680 5.49 5170 320984 4.500 0.120 500 7952 0.237 750 11928100 114.3 3.05 3450 35372 6.02 5170 530585 5.563 0.134 500 12153 0.258 750 18229125 141.3 3.40 3450 54060 6.55 5170 810866 6.625 0.134 500 17236 0.280 700 24130150 168.3 3.40 3450 76670 7.11 4825 1073358 8.625 0.148 300 17528 0.322 600 35056200 219.1 3.76 2070 77970 8.18 4135 155936* Working Pressure and End Load are total from all internal and external loads grooved in steel pipe in accordancewith Victaulic specifications. Contact Victaulic for performance on other pipe.WARNING: FOR ONE TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 1 ½ timesthe figures shown.ŧ cULus approved for use on schedule 10 pipe: 2, 2 ½, 3 and 4 inch sizes rated to 363 psi/25 bar; 5 and 6 inchrated to 290 psi/20 bar; 8 inch rated to 232 psi/16 bar.FM approved on schedule 10 pipe: 2, 2 ½, 3, 4, 6 and 8 inch sizes rated to 363 psi/25 bar.§ cULus approved for use on schedule 40 pipe: 2, 2 ½, 3, 4, 5, 6 and 8 inch sizes rated to 363 psi/25 bar.FM approved on schedule 40 pipe: 2, 2 ½, 3, 4, 6 and 8 inch sizes rated to 363 psi/25 bar.1-5WWW.VICTAULIC.COM