Victaulic General Catalog

FittingsNo. 10-DR Drain ElbowNO. 10-DR Drain ElbowCto EUSAFor Complete InformationRequest Publication 10.05HC to ENO. 10-DRPNominal SizeInches mmSizeDimensions inches/mmActual Outside DiameterInches mm C to E H P2 1/2 2.875 3.75 2.75 1.6865 73.0 95.3 69.9 42.73 3.500 4.25 2.75 2.1080 88.9 108.0 69.9 53.34 4.500 5.00 2.75 2.60100 114.3 127.0 69.9 66.06 6.625 6.50 2.75 3.65150 168.3 165.1 69.9 89Note: The drain is drilled and tapped for a 1-inch/25-mm NPT outlet.Long Radius Elbow 3DWith added wall thicknessat bend for abrasive services.NO. 100-3D 90º Long Radius Elbow 3DNO. 110-3D 45º Long Radius Elbow 3DC to EC to EFor Complete InformationRequest Publication 07.01NO. 100-3D NO. 110-3DFITTINGSNominalSizeInchesmmSizeActualOutside DiameterInchesmmIn Non-criticalAreaInchesmmWall ThicknessAt BackWear AreaInchesmmExtraInchesmmNo. 100-3D90º Long Radius ElbowC to EInchesmmApprox.Weight EachLbs.kgNo. 110-3D45º Long Radius ElbowC to EInchesmmApprox.Weight EachLbs.kg2 2.375 0.184 0.309 0.125 10.00 5.0 6.50 4.750 60.3 4.67 7.85 3.18 254 2.3 165 2.13 3.500 0.246 0.371 0.125 13.00 16.0 7.75 10.480 88.9 6.25 9.42 3.18 330 7.3 197 4.74 4.500 0.267 0.455 0.188 16.00 25.5 9.00 17.2100 114.3 6.78 11.56 4.78 406 11.6 229 7.86 6.625 0.310 0.560 0.250 24.00 70.0 13.50 45.0150 168.3 7.87 14.22 6.35 610 31.8 343 20.4Note: All fittings are ductile iron unless otherwise noted with an “sw” or “s”. SW = Segmentally Welded. S = Carbon Steel.Reducing Base Support ElbowNO. R-10G Grv. × Grv.NO. R-10F Grv. × FlangeHHFor Complete InformationB Dia.B Dia.Request Publication 07.01NO. R-10G NO. R-10FNo. R-10Reducing Base Support ElbowApprox.Weight EachSizeNominalBSizeC to EHDiameterGrv. × Grv.InchesInchesInchesInchesLbs.mmmmmmmmkg64 9.00 1.25 1.50 19.0 33.0×150 100 229 32 38 8.6 15.05 9.00 1.50 1.50 23.0 38.0125 229 38 38 10.4 17.286 10.50 2.13 1.50 33.0 52.0×200 150 267 54 38 15.0 23.6108 12.00 2.40 1.50 61.0 88.0×250 200 305 61 38 27.7 39.9Note: All fittings are ductile iron unless otherwise noted with an “sw” or “s”. SW = Segmentally Welded. S = Carbon Steel.C to EC to EGrv. × FlangeLbs.kg2-5WWW.VICTAULIC.COM