AKRAPOVIC RACING & EVOLUTION EXHAUST ... - Akrapovic Auspuff

4. Tighten up the flanges, make sure the header tubes are not touching the engine, coolers, other tubes, electricalinstallations etc.; make sure not to damage the cooling fins during this process (Figure 52). Tighten the lambda sensor;make sure the electrical lead is correctly positioned (Figure 53).39Nm29ftlbFigure 52Figure 535. Correctly position the carbon-fiber clamp and slide it onto the muffler - bear in mind the left offset of the carbon-fiberclamp viewed from the rear. WARNING: open the clamp to slightly wider than the diameter of the outer sleeve of themuffler – do not scrape it along the muffler outer sleeve! (Figure 54). For Evolution exhaust only: coat the interiorside of the input bush of the muffler with Akrapovic ceramic anti-seizing grease (white tube). Position the muffler correctlyand slide onto the outlet side of the link pipe (Figure 55). Position and attach the springs (Figure 56).Figure 54 Figure 55Figure 56NAV - 359 11