Electromagnetic Analysis Speeds RFID Design - Sonnet Software

ePAPER READ

DOWNLOAD ePAPER

sonnetsoftware.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

B-Field25 mm above coilE-FieldFigure 6. The tangential E-field as calculated by Sonnet, 25 mm (left) and 35 mm (right)above the coil as calculated by Sonnet. Sonnet does not directly plot B-field, howeverthe B-field “curls” around the E-field as illustrated here on the right.

Patch Antenna with L-Shaped Radiators - Sonnet Software

Design of a V-band Phase Shifter Using SP4T RF ... - Sonnet Software

The Use of Offset Coupled Microstrip Combline ... - Sonnet Software

UNIX and Linux Installation Manual - Sonnet Software

UNIX AND LINUX INSTALLATION RELEASE 11 - Sonnet Software

RFID Design Using EM Analysis - Sonnet Software

Wideband Microstrip Patch Antenna at 7 GHz - Sonnet Software

Chapter 4 Conformal Mesh Tutorial - Sonnet Software

A New Definition of Characteristic Impedance - Sonnet Software

Obtaining the Sonnet Example Files - Sonnet Software

RFIC Layout Analysis Using Sonnet EM with ... - Sonnet Software

Optimization of a Microstrip Matching Circuit at ... - Sonnet Software

ImagMagFigure 5. Analysis of the complete RFID circuit shows the expected high impedance(“mag” curve) at the 13.56 MHz resonance (frequency where the imaginary part is zero).

Page 1 and 2: Electromagnetic Analysis Speeds RFI
Page 4 and 5: frequency, but, for this case, that
Page 7: Sonnet ModelEquivalent ModelR S =1.
Page 11 and 12: Figure 8. Two inductors can be repe
Page 13: Tag coildetunedTag coilresonant,but

Electromagnetic Analysis Speeds RFID Design - Sonnet Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?