Simulation of the Effects of an Air Blast Wave - ELSA - Europa

9 References[1] Alia, A.; Souli, M.: High explosive simulation using multi-material formulations, AppliedThermal Engineering 26, pp. 1032-1042, 2006.[2] Baker, Wilfrid E.: Explosions in the Air, University of Texas Pr., Austin, 1973.[3] Baker, W.E.; Cox, P.A.; Westine, P.S.; Kulesz, J.J.; Strehlow, R.A.: Explosion Hazards andEvaluation, Elsevier, Amsterdam, 1983.[4] Birnbaum, Naury K.; Clegg, Richard A.; Fairlie, Gerg E.; Hayhurst, Colin J.; Francis, NigelJ.: Analysis of blast loads on buildings, Preprint from “Structures under Extreme LoadingConditions – 1996”, Montreal, Quebec, Canada, 1996.[5] Brode, Harald L.: Numerical solutions of spherical blast waves, Journal of Applied Physics26, No 6, pp. 766-775, 1955.[6] Casadei, F.: “Use of EUROPLEXUS for Building Vulnerability Studies. Progress Report 1”,Technical Note I.05.50, July 2005.[7] Casadei, F.; Anthoine, A.: Use of EUROPLEXUS for Building Vulnerability Studies,Progress Report 2, Technical Note I.006972, March 2007.[8] CASTEM 2000, Guide d’ Utilisation, CEA, France, 1990.[9] Clutter, J.; Keith, Stahl, Michael: Hydrocode simulations of air and water shocks for facilityvulnerability assessments, Journal of Hazardous Materials, 106A, pp. 9-24, 2004.[10] Dobratz, B.M.; Crawford, P.C.: LLNL Explosives Handbook: Properties of Chemical Explosivesand Explosive Simulants, University of California, Lawrence Livermore NationalLaboratory, Report UCRL-5299, Rev. 2; 1985.[11] EUROPLEXUS, User’s Manual, online version.[12] Fairlie, Greg E.: Efficient analysis of high explosive air blast in complex urban geometriesusing the AUTODYN-2D & 3D hydrocodes, analytical and experimental methods, 15 th Int.Symposium on the Military Aspects of Blast and Shock, 14-19 September 1997, Banff,Canada.[13] Kingery, C.N.; Pannill, B.F.: Parametric Analysis of the Regular Reflection of Air Blast, BRLReport 1249, June 1964 (AD 444997).[14] Kingery, Charles N.; Bulmash, Gerald: Airblast Parameters from TNT Spherical Air Burstand Hemispherical Surface Burst, Defence Technical Information Center, Ballistic ResearchLaboratory, Aberdeen Proving Ground, Maryland, 1984.[15] Kinney, Gilbert F.; Graham, Kenneth J.: Explosive Shocks in Air, Springer, Berlin, 1985.[16] Krauthammer, T.; Altenberg, A.: Negative phase blast effects on glass panels, InternationalJournal of Impact Engineering, 24 (1), pp. 1-18; 2000.[17] Larcher, Martin; Herrmann, Nico; Stempniewski, Lothar: Explosionssimulation leichterHallenhüllkonstruktionen, Bauingenieur 6, pp. 271-277, 2006.[18] Lu, J.P.; Christo, F.C.; Kennedy, D.L.: Detonation modelling of corner-turning shocks inPBXN-111, 15 th Australian Fluid Mechanics Conference, Sydney, 2004.[19] Protective Design Center, United States Army Corps of Engineers: CONWEP, ConventionalWeapons Effects, https://pdc.usace.army.mil/software/conwep/, 22.May 2007.[20] Rose, T.A.; Smith, P.D.: Influence of the principal geometrical parameters of straight citystreets on positive and negative phase blast wave impulses, International Journal of Impact65