SAL 35 ® Catalog - NAD Klima

NAD KLimaLinear diffuserEnd caps and connectorsEnd CapsThe end cap must be indicated in yourorder. If not specified, the diffuser will bedelivered without end cap. The endangle may be combined with a right endplate.In order to better align many diffusersend-to-end, the diffuser's pressure dropcan be compensated for by inserting apermanent resistance in the connector.PS with short profileflat end cap2 mm 2 mmPS2 : with flat end cap on two (2) sidesPSR : with flat end cap on right sidePSL : with flat end cap on left side2 mmPL with large profileEnd cap in« L » shape15 mm 15 mm15 mmPL2 : with end cap in “L” shape on both sides PLL : with end cap in “L” shape on left side PLR : with end cap in “L” shape on right sideAPA for steel plateConnectors (pull pins)Individual slots are connectedwith a connecting and centeringprofile, which are part of thestandard delivery package whenlinear constructions are ordered.Connectors (pull pins)PLL PLP PLRLeft Connectors RightSubject to technical changes. Version 30 / 05 / 2013 1.1.3 SAL 3513