13.07.2015 Views

OWNER'S MANUAL 1750/1760/1765 - Whistler

OWNER'S MANUAL 1750/1760/1765 - Whistler

OWNER'S MANUAL 1750/1760/1765 - Whistler

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>1750</strong>/<strong>1760</strong>/<strong>1765</strong> manual 3/6/02 2:20 PM Page 25RESET FEATURESCARE & MAINTENANCEReset FeaturesAll user features can be reset to factory settings.• Unplug Power Cord from unit.• Press and hold Power and Quiet.• Plug Power Cord into unit.• Wait for 2 beeps.• Release Power and Quiet buttons. Unit is now reset.Care And MaintenanceDuring the summer months, avoid prolonged exposure todirect sunlight by removing your unit from the dash whenyour vehicle is parked for an extended period of time.Do not spray water, cleaners or polishes directly onto theunit. The spray may penetrate through the openings anddamage the unit. Also, do not use any abrasive cleaners onthe unit’s exterior.1. Audio to level (4).2. Display reads Highway.3. Dim/Dark Mode to full illumination of display.4. Auto Quiet Mode OFF.5. VG-2 Detection Mode OFF.6. Combo ON. (<strong>1760</strong>/<strong>1765</strong> only)7. Safety ON.8. Vehicle Battery Saver ON.9. Full Power Up sequence.10. Default TONE 3.11. Unit ON or OFF.NOTE: Must calibrate compass after resetting features.(<strong>1760</strong>/<strong>1765</strong> only)2223

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!