13.07.2015 Views

AIRCRAFT SERVICE CHANGE - Code7700

AIRCRAFT SERVICE CHANGE - Code7700

AIRCRAFT SERVICE CHANGE - Code7700

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Gulfstream G450 Aircraft Service Change 072“December 22, 2011”Description / Man-HoursRequired Per Aircraft:This service change incorporates a wiring modificationat the cockpit voice recorder and loads new software.Approximately 8 man-hours will be required for thisinstallation.Approved Engineering Data:The source data for this aircraft service change is:1159ASC47072 Rev. “-” Top Drawing – ASC 072 DataLink RecordingPrerequisites:G450 ASC 909 – PlaneView Master Operating SoftwareUpdate, or later approved versionPrior to, or at the time this ASC is ordered, operatorswill be required to supply a configuration report of theCentral Maintenance Computer (CMC). The CMCconfiguration report can be stored on the aircraft PClaptop then electronically submitted to Gulfstream atasc.software@gulfstream.com. Allow 3-5 days for theCMC report review and up to 21 days for the creation ofnew Options Data software.Associated Documents: G450 Aircraft Maintenance Manual (AMM), Chapters 20and 31GIVX-GER-9934 – PlaneView Software Loading,Verification and Return To Service Procedures.Includes appropriate Data Load Guide based on aircraftCert level and is located in Maintenance Applications onthe aircraft laptop.Flight Manual Revision /Supplement Required:There will be no cockpit procedural changes required asa result of this installation.Publications Data:Data concerning this service change will be published ina future revision of the affected manual(s). This bookletwill provide technical data until the revision(s) ispublished.EffectivityThis service change is applicable to aircraft serialnumbers 4212 and subsequent.Effect on Spares:NonePage 2 of 10

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!