Variable permittivity dielectric material loaded stepped-horn antenna

88[41] R. C. Johnson and H. Jasik, Antenna Engineering Handbook. McGraw-Hill BookCompany, 2nd ed., 1984.[42] F. Arndt, U. Tucholke, and T. Wriedt, "Computer-optimized multisection transformersbetween rectangular waveguides of adjacent frequency bands," IEEE Trans. AntennasPropagat., vol. 32, pp. 1479-1484, November 1984.[43] S. P. Skobelev, B. Ku, A. V. Shishlov, and D. Ahn, "Optimum geometry and performance ofa dual-mode horn modification," IEEE Antennas and Propagation Magazine, vol. 43,pp. 90-93, February 2001.[44] C. C. Han and A. N. Wickert, "A new multimode rectangular horn antenna generatinga circularly polarized elliptical beam," IEEE Trans. Antennas Propagat., vol. 22,pp. 746-751, November 1974.[45] A. K. Bhattacharyya and G. Goyette, "A novel horn radiator with high aperture efficienyand low cross-polarization and applications in arrays and multibeam reflectorantennas," IEEE Trans. Antennas Propagat., vol. 52, pp. 2850— 2859, November 2004.[46] P. Clarricoats and R. F. D. A. Olver, "High performance compact corrugated horn," IEEProc.-Microw. Antennas Propag., vol. 151, pp. 519-524, December 2004.[47] A. D. Olver and J. Xiang, "Design of profiled corrugated horns," IEEE Trans. AntennasPropagat., vol. 36, pp. 936-940, July 1988.[48] A. S. Slobelev and P.-S. Kildal, "Analysis of a hard strip-loaded conical horn by the methodof generalized scattering matrix," IEEE Trans. Antennas Propagat., vol. 51, pp. 2918-2925, July 2003.