Name: Wired Water Leak Sensor Model: WL-01 The Wired Water ...
Name: Wired Water Leak Sensor Model: WL-01 The Wired Water ...
Name: Wired Water Leak Sensor Model: WL-01 The Wired Water ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Name</strong>: <strong>Wired</strong> <strong>Water</strong> <strong>Leak</strong> <strong>Sensor</strong><strong>Model</strong>: <strong>WL</strong>-<strong>01</strong><strong>The</strong> <strong>Wired</strong> <strong>Water</strong> <strong>Leak</strong> <strong>Sensor</strong> is Electrode-detection, according to electrodeschanges in water resistance principle, conducted by the Application SpecificIntegrated Chip signal amplification, plastic, compared to the output of high orlow alarm signal for the relay module. <strong>The</strong> PCB was designed of aphotoelectric isolation, coil isolation, and isolation relays, and other safetymeasures.★Application:Communications base station, precision machine room, hotels, restaurants,libraries, warehouses, urban water supply, buildings, water and other needs ofthe protection from water cases.★Functions & Features:
VCC: Power input, contact to +12VDC(positive electrode).2. <strong>The</strong> front end sensor:<strong>The</strong> installation should be as the picture, the yellow part should be upwards,and the two wires should be downwards, when the two wires contacted by thewater, then the sensor will actiavite and send signal to the transmitter.------ End-----
Change language