RN Series Data Sheet 10 W SMT DC-DC Wide Input ... - Power-One

RN Series Data Sheet10 W SMT DC-DC Wide Input ConvertersRND02ZGGAll specifications apply over input voltage, output load and temperature range, unless otherwise noted.Note:- Maximum output power is 9W:Vo1: +5.1 V / 0.75 AParameter Conditions/Description Min Nom Max UnitsOutput VoltageVo Vin.Nom, Io1=Io2 = 0.3 A,Setpoint Accuracy25 °C5.06 5.1 5.14 VOutput Current * Io Vin.Min to Vin.Max 0.1 0.75 1.00 ALine Regulation Vin.Min to Vin.Max, 50%Io.Max40 mVLoad Regulation Vin.Nom, Io.Min to Io.Nom 100 250 mVCross RegulationIo1 = 0.5A, Io2 Min to Nom,measure ΔVo2100 mVDynamic RegulationPeak DeviationSettling Time25-75% Io.Max load stepchange.to 1% error band250200± mVμsOutput Voltage RippleVin.Min to Vin.Max, Io.Min toIo Max, 20 MHz Bandwidth50 100 mVp-pAdmissible Load Cap. Io.Max, Vin.Nom 2,200 # μFOutput Current LimitVout ≤0.90 Vo.Nom, bothThresholdoutputs set to Icl110 150 %Io.MaxSwitching Frequency Vin.Nom, Io.Max 400 kHzTemperature Coeff. 0.02 %Vo/°CTrim RangeIo.Min to Io.Max, Vin.Min toVin.Max4.0 7.0 VoVo2: -5.1 V / 0.75 AParameter Conditions/Description Min Nom Max UnitsOutput VoltageVo Vin.Nom, Io1 =Io2 = 0.3 A,V-5.06 -5.10 -5.14Setpoint Accuracy25 °COutput Current * Io Vin.Min to Vin.Max 0.1 0.75 1.0 ALine Regulation Vin.Min to Vin.Max, 50%mV40Io.MaxLoad Regulation Vin.Nom, Io.Min to Io.Nom 100 250 mVCross RegulationIo2 = 0.5 A, Io1 Min to Max,mV100measure ΔVo1Dynamic RegulationPeak DeviationSettling Time25-75% Io.Max load stepchange.to 1% error band250200± mVμsOutput Voltage RippleVin.Min to Vin.Max, Io.Min tomVp-p50 100Io Max, 20 MHz BandwidthAdmissible Load Cap. Io.Max, Vin.Nom 2,200 # μFOutput Current LimitVout ≤0.90 Vo.Nom, both%Io.Max110 150Thresholdoutputs set to IclSwitching Frequency Vin.Nom, Io.Max 400 kHzTemperature Coeff. 0.02 %Vo/°CTrim RangeIo.Min to Io.Max, Vin.Min toVin.Max–4.0 –7.0 Vo* At Iout