RN Series Data Sheet 10 W SMT DC-DC Wide Input ... - Power-One

RN Series Data Sheet10 W SMT DC-DC Wide Input ConvertersPackaging: JEDEC TrayDimensions in mm [inches]322.624.15 43.833.362.131512.19JEDEC TRAY12.19Pin AllocationPin Designation Single-output models Designation Double-output models Referenced to1 +Vo Positive output +Vo1 Output voltage 1 Secondary2 –Vo Negative output RTN Output voltage return Secondary3 n.c. n.c. –Vo2 Output voltage 2. Secondary4 n.c. n.c. n.c. n.c. Secondary5 n.c. n.c. n.c. n.c. Secondary6 n.c. n.c. n.c. n.c. Primary7 Sync Synchronization input Sync Synchronization input Primary8 1 Trim 1 Output voltage adjust. Trim 1 Output voltage adjust. Primary9 1 NOR 1 Nominal output voltage NOR 1 Nominal output voltage Primary10 2 PUL 2 Turn-on/off adjust PUL 2 Turn-on/off adjust Primary11 SD Shutdown SD Shutdown Primary12 n.c. n.c. n.c. n.c. Primary13 n.c. n.c. n.c. n.c. Primary14 n.c. n.c. n.c. n.c. Primary15 n.c. n.c. n.c. n.c. Primary16 n.c. n.c. n.c. n.c. Primary17 –Vin Negative input –Vin Negative input Primary18 +Vin Positive input +Vin Positive input Primary1Connect pin 8 to pin 9 in order to get the nominal output voltage2This feature is not available on 4:1 input range devices, RNS01EE, RNS01EG, RNS0.9ET.NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as criticalcomponents in life support systems, equipment used in hazardous environments, or nuclear control systems without the express writtenconsent of the respective divisional president of Power-One, Inc.TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending onthe date manufactured. Specifications are subject to change without notice.BCD.00038 Rev. AA, 19-Feb-2012 Preliminary Page 24 of 24 www.power-one.com