Model YPC Two-Stage Steam-Fired Absorption ... - Usair-eng.com

More documents

Recommendations

Info

Application Data - continuedTABLE 2 – ELECTRICAL DATA NOTES:1. Incoming wire to chiller must be copper only. Aluminum wiring is not permitted.2. Lugs in Power Panel will accept incoming wire range of #14 AWG through #1 AWG.3. Electrical system must be securely guarded.4. Field wiring must conform to NEC and all other applicable local codes.16 JOHNSON CONTROLS
DimensionsFORM 155.19-EG3 (1108)YORK International is committed to a policy of continuous product improvement. Dimensions subject to changewithout notice. Consult factory-submitted drawings. NOTES:1. Tube pull space for the main shell is equal to the unit length on either end of the machine. first-stage generator tube pull space is requiredon the end opposite the steam inlet.2. Steam inlet and condensate outlet are 150 PSIG raised face flanged.JOHNSON CONTROLS17
Page 1 and 2: FORM 155.19-EG3 (1108)Model YPC Two
Page 3 and 4: IntroductionFORM 155.19-EG3 (1108)M
Page 5 and 6: FORM 155.19-EG3 (1108)4. CondenserR
Page 7 and 8: FORM 155.19-EG3 (1108)WARNING CONDI
Page 9 and 10: FORM 155.19-EG3 (1108)steel plate w
Page 11 and 12: Optional FeaturesFORM 155.19-EG3 (1
Page 13 and 14: FORM 155.19-EG3 (1108)start/stop fl
Page 15: FORM 155.19-EG3 (1108)limit switch
Page 19 and 20: Nozzle Arrangement 16SL and LargerF
Page 21 and 22: FORM 155.19-EG3 (1108)PURGING SYSTE
Page 23 and 24: FORM 155.19-EG3 (1108)Remote reset

Model YPC Two-Stage Steam-Fired Absorption ... - Usair-eng.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?