Washer-disinfector G 7882 CD

Programmable functionsFor future sevicing work, please document any alterations to the factory defaultsettings.Enter any alterations in the appropriate box.General notes:– Switch positions that have not been allocated a function are indicated in themiddle part of the display by a bar ( - ).– The programming level is called up via the f position.It is shown as E.. in the display.– When processing medical devices, any changes made to programmes ordispensing systems must be documented in a log book kept with the machine(in accordance with the Medical Devices Directive). The machine's cleaningand disinfecting standards must also be re-validated.The following applies to all programmable functions:To activate programming mode^ Turn the programme selector to f.^ Switch off the machine.^ Press ß and 6 at the same time,hold them in and, whilst doing so,press the I-0 switch.The current programme version P.. willappear in the display. The p / 6indicator light comes on.To save values and exit from programming mode^ Press 6.^ Press 6 again.SP will appear in the display.The alteration is now saved.To exit from programming mode without saving^ Switch the machine off with the I-0switch.The alteration will not be saved.41