Washer-disinfector G 7882 CD
Washer-disinfector G 7882 CD
Washer-disinfector G 7882 CD
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Problem solving guideFault Possible cause RemedyThe Add salt indicatorlight k flashes.A few minutes after thestart of a programme,the p / 6 indicatorflashes and theprogramme iscancelled.The salt reservoir has notbeen replenished, meaningthat the water softenercould not be reactivated.Fault code: F..E:There is a water inlet fault.Fill carefully with salt.Before trying to rectify theproblem, you must:– Turn the programmeselector to f (the faultcode goes out).– Switch the machine offwith the I-0 switch.– Open the stopcock.– Clean the water inletfilter.– The water pressure atthe intake is too low. Aska plumber for advice.Then:– Switch the machine on.– Start the programmeagain.64