Washer-disinfector G 7882 CD

Other problemsCleaning the filters in the waterinletFilters are incorporated in the screwconnection of the water inlet hose toprotect the water inlet valve. If thesefilters get dirty they need to be cleaned,otherwise insufficient water flows intothe wash cabinet.To clean the filter^ Disconnect the machine from themains supply.^ Turn off the stopcock and unscrewthe water inlet hose.,The plastic housing of the waterconnection contains an electricalcomponent. It must not be dipped inwater.^ Clean the large area filter (1) and finefilter (2), and replace with new filtersif necessary.^ Replace filters and the seal. Makesure they are sitting correctly.^ Reconnect the inlet hose to thestopcock, making sure it goes oncorrectly and is not cross-threaded.Open the stopcock gradually to test forleaks.If there is a leak, the inlet hose mightnot be on securely or it may have beenscrewed on at an angle.Unscrew and reconnect the water inletvalve correctly.71