Schaefer Catalog - Franklin Electric

Non-Submersible PumpsS SeriesNon-Corrosive Centrifugal PumpsThis flooded suction centrifugal pump is suitable for use withsaltwater, chemical transfer (please consult factory for specificchemical compatibility), and other pumping applications thatdeal with corrosive substances.Features:High tech, non-corrosive plastic construction. All metalcomponents that have contact with liquid are stainless steel.Motor shaft is completely insulated from any contact withpumping liquid.Mechanical seal has ceramic and carbon faces. All other partsare buna-n-rubber and stainless steel.Patented air cooled heat sink allows pump to run dry or inloss-of-prime conditions without damage to the shaft seal.Unconditional two year warranty against seal failure.Floating eye seal on the impeller maximizes pump efficiencyfor best flow and pressure.Will accept either a standard 1-1/2" union or a male 1-1/2"pipe thread. Unions must be ordered separately.UL and CSA agency listing do not apply to any applicationother than water applications.Ordering InformationS SERIES THERMOPLASTIC CENTRIFUGAL PUMPSMODELHPSUCTIONPUMP UNITVOLTAGEX DISCHARGEORDER NO.WT.S7KM 3/4 1-1/2" x 1-1/2" MNPT 115 94028263 22S1KM 1 1-1/2" x 1-1/2" MNPT 115 94028271 24S15KM 1-1/2 1-1/2" x 1-1/2" MNPT 115 94028289 26S2M 2 1-1/2" x 1-1/2" MNPT 115/230 94028297 35Fittings kit contains (2) 1-1/2" slip x threaded connection union halves 31175608 1Note: Set of union halves must be purchased separately. Weight in pounds.120