Schaefer Catalog - Franklin Electric

Motors, Drives, Controls & ProtectionConstant Pressure ControllersSubDrive AccessoriesAuxiliary Relay Communications BoardThe Auxiliary Relay Communications Board is available for use with the SubDrive/MonoDrive NEMA4 (excluding SubDrive300) constant pressure controllers. TheAuxiliary Relay Board provides run-indication relay contacts. The relays can beused to communicate the state of the drive (running or idle) to auxiliary equipment(water treatment) or to utilize multiple sensors (Tank Drawdown Kit).Franklin Part Number: 225755901Tank Drawdown KitThe Tank Drawdown Kit is available for use with the SubDrive2W, SubDrive300 and the SubDrive/MonoDrive NEMA4 with an Auxiliary Relay Board installed utilizing the relay contacts. The kit is intendedto allow the SubDrive system to utilize water from a tank during low flow applications.Franklin Part Number: 22577901Heatsink Cover KitThe heatsink cover kit is available for use with the SubDrive/MonoDrive Nema4 constant pressure controllers. Thekit is a grill to protect the top of the unit’s heat sink from intrusion from animials or debris when mounted outside.Franklin Part Number: 225805901Direct Burial CableThe direct burial cable kits are for use with the SubDrive/MonoDrive constant pressure controllers as a connection tothe pressure sensors. The Direct Burial cable can be used for applications that require the sensor cable to be buried andextends the allowable length of the pressure sensor connection from 100 ft (30.5 m) to 300 ft (91.5 m).DescriptionFranklin Part NumberDirect Burial Kit - 10 ft (3 m) 225800901Direct Burial Kit - 30 ft (9 m) 225800902Direct Burial Kit - 100 ft (30.5 m) 225800903191