Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Motors, Drives, Controls & ProtectionConstant Pressure ControllersSubDrive AccessoriesSubDrive Duplex AlternatorThe SubDrive Alternator allows a water system to alternate between twoparallel pumps controlled by separate SubDrives or MonoDrives. The userselectedswitching interval balances the run time of each pump systemto evenly disperse the workload. In addition, when demand exceedsthe capacity of one pumping system, the other system comes online tosupplement production. The SubDrive Alternator can be used with anySubDrive or MonoDrive controller.<strong>Franklin</strong> Part Number: 585 001 2000Input (From Power Source)Pressure Setting*Approximate Controller Size (NEMA 4)* Pressure sensors must be set at least 3 psi apart.VoltageFrequencyFactory PresetAdjustment RangeOuter DimensionsWeight115 VAC60 Hz50 psi25-80 psi5.8 x 5.8 x 3.6” (14.7 x 14.7 x 9.1 cm)1.3 lbs (0.59 kg)SubDrive/MonoDrive Fan KitsInstallers can remove the fan and make an attempt to clean the fanby removing any particles that may restrict movement. In applicationswhere the fan cannot be cleaned or freed from particles, or is damaged ormalfunctioning, the fan replacement kit is an easy and inexpensive fix.NEMA 4 NEMA 1CONTROLLER KIT PART NUMBERCONTROLLER SIZE KIT PART NUMBERMonoDriveSubDrive75MonoDriveXTSubDrive100SubDrive150SubDrive300NEMA 3RCONTROLLER225 635 901225 635 902External cooling fans225 635 903Internal stirring fan225 635 904KIT PART NUMBERSubDrive75 and MonoDrive 3.15 in. (80 mm)* 225 635 905SubDrive75 and MonoDrive 3.62 in. (92 mm)* 225 635 908SubDrive100/150 and MonoDriveXT 3.15 in. (80 mm)* 225 635 907SubDrive100/150 and MonoDriveXT 3.62 in. (92 mm)* 225 635 909* Outside measurement of fanSubDrive2W 225 635 910190
Change language