You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9Check the delivered goods without delay.If the product shows transport damage, contact the transport company and your dealerimmediately.2.2 Lifting and transferring the machine, Fig. 3, all modelsThe machine may be lifted using thefollowing points. If using a sling, by lifting point A on theupper part of the crosscut saw housing. If using a forklift truck at points B on bothsides under the frame beams.A2.3 Main parts of the machine, Fig 41. In-feed belt2. Table extension3. Extension table leg4. Optional hydraulics5. Conveyor support6. <strong>Manual</strong> start of the splitting cylinder7. Spring-loaded clamp as a standardfeature, <strong>Ergo</strong> model8. 7.Hydraulic clamp, optional9. Protective cover for the infeed conveyor10. Blade cover11. Lever for launching the crosscutoperation, <strong>Ergo</strong> model12. Protective net for splitting chute13. Adjustment lever for the splitting wedge,<strong>Ergo</strong> model14. Swing lock for conveyor15. Conveyor31 2 3 4 5B6 7 8 9 10 11 12 13 142.4 Main parts of the machine, S model,Fig. 51. Oil cooler, optional2. Height adjustment lever for the splittingwedge3. Hydraulic clamp4. Joystick, hydraulic control of the infeedconveyor and the crosscut saw-bar5. Adjustment cylinder for the splitting wedge46The oil cooler is a piece of optionalequipment suited to both tractor-driven andelectrically driven models. Using the oilcooler is advisable, if the machine isconstantly operated under warm conditions.The cooler is controlled by a thermostat.In the tractor-driven machine, the voltage of 5 1 2 3 4 512V is taken from the light outlet on thetractor and in the electrically driven machine it is taken from the main electric centre.<strong>Palax</strong>_KS_35_<strong>Ergo</strong>+S_v4_07_EN.doc
Change language