13.07.2015 Views

DRAFT IS-GPS-705A Comment Resolution Matrix - GPS.gov

DRAFT IS-GPS-705A Comment Resolution Matrix - GPS.gov

DRAFT IS-GPS-705A Comment Resolution Matrix - GPS.gov

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>IS</strong>-<strong>GPS</strong>-705 CRMCID Originator/Org. Page/Para Importance <strong>Comment</strong> PO <strong>Resolution</strong> & Concurrence NotesFrom: From “For a given navigation payloadredundancy configuration, the absolute value ofthe mean differential delay shall not exceed 30.0nanoseconds. The random variations about themean shall not exceed 3.0 nanoseconds (twosigma).”Final To: The group delay differential between theradiated L1 and L5 signals (i.e. L1 P(Y) and L5 I5;and L1 P(Y) and L5 Q5) is specified as consisting ofrandom plus bias components. The meandifferential is defined as the bias component andwill be either positive or negative. For a givennavigation payload redundancy configuration, theabsolute value of the mean differential delay shallnot exceed 30.0 nanoseconds. The random plusnon-random variations about the mean shall notexceed 3.0 nanoseconds (95% probability), whenincluding consideration of the temperature andantenna effects during a vehicle orbitalrevolution.. L1 and L2 group delay differential isdescribed in 3.3.1.7.2 of <strong>IS</strong>-<strong>GPS</strong>-200. Correctionsfor the bias components of the group delaydifferential are provided to the users in the NAVmessage using parameters designated as TGD(reference paragraph 20.3.3.3.3.2 of <strong>IS</strong>-<strong>GPS</strong>-200)and Inter-Signal Correction (<strong>IS</strong>C) (referenceparagraph 20.3.3.3.1.2).comment will be withdrawn.10/01/09: This section has been modifiedreal-time at ICWG to be in synch with <strong>IS</strong>-<strong>GPS</strong>-200 10/14/09: The comment was notaccepted, however, ICC changed the POresolution to A/C since this section wasunder review at the last 10/1/09 ICWG.updated CRM69 Thomas NagleGPCPage: 16Para: 3.3.1.7.3SRationale: Tighten the specs for Block III SVs.<strong>Comment</strong>: Please provide the values for the SSVgroup delay differential.From: N/AFinal To: Suggested Change: Please provide thevalues.PO <strong>Resolution</strong>: RejectRationale: Per stakeholder agreement, values were tobe placed outside of this document. See Action Item# 22 for <strong>IS</strong>-<strong>GPS</strong>-800.Concurrence: ConcurGPC Rejects PO’s <strong>Resolution</strong>, againrequesting these values be provided in thisdocument. (05/21/09): 8/6/09: seecomment 135 from the 200 CRM forresolution. See AI #50 for resolution. 10-sept-09: AI #50 was closed. this commentmust be deferred since RIL item will beopened at a later time. changed the31

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!