Lista mensal documentos normativos - IPQ

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãolista mensal OUTUBRO 2010A presente -publicação tem por objectivo:- A divulgação das Normas Portuguesas recentemente editadas e anuladas, bem como das NormasEuropeias adoptadas como Normas Portuguesas, e das Normas Europeias e Internacionais publicadase já disponíveis.- A divulgação pública dos projectos de Normas Portuguesas, Europeias e Internacionais, com vista àobtenção durante o período de inquérito público dos pontos de vista e contribuições nacionais quepossam ser considerados na sequente elaboração, aprovação e homologação das Normas.- A divulgação de propostas de novos trabalhos de normalização europeia e internacional, para quese possa obter, durante o período de inquérito público, os pontos de vista e as contribuiçõesnacionais.- A divulgação da edição e anulação de outros documentos normativos.ÍNDICE1. Normas Portuguesas1.1 Normas Portuguesas publicadas …………………………………………………………………………. 31.2 Normas Portuguesas anuladas …………………………………………………………………………… 51.3 Normas Portuguesas em re-exame ……………………………………………………………………… 71.4 Normas Europeias adoptadas ……………………………………………………………………………. 82. Normas Europeias Publicadas2.1 CEN …………………………………………………………………………………………………………….. 132.2 CENELEC ………………………………………………………………………………………………………. 162.3 CEN/CENELEC ……………………………………………………………………………………………….. 182.4 ETSI ……………………………………………………………………………………………………………… 193. Normas Internacionais publicadasIEC ……………………………………………………………………………………………………………………ISO4. Projectos de normas portuguesas4.1 Projectos em inquérito público …………………………………………………………………………… 234.2 Projectos anulados ………………………………………………………………………………………….. 245. Projectos de normas e propostas de estudo de novas normas do Comité Europeu deNormalização(CEN e do Comité Europeu para a Normalização do Ferro e do Aço (ECISS)5.1 Projectos em inquérito público …………………………………………………………………………… 255.2 Questionários preliminares ………………………………………………………………………………… 495.3 Comités Técnicos do CEN …………………………………………………………………………………. 502022imp DNOR-01-06 Rua António Gião, 2 2829-513 CAPARICATel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt

Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoÍNDICE (cont.)6. Projectos de normas e propostas de estudo de novas normas do Comité Europeude Normalização Electrotécnica (CENELEC)6.1 Projectos em inquérito público ………………………………………………………………………… 546.2 Propostas de anulação de Normas …………………………………………………………………... 666.3 Proposta de estudo de novas normas - "Vilamoura Procedures" ………………………………. 676.4 Questionários preliminares ……………………………………………………………………………… 687. Projectos de Normas e Propostas de Estudo de Novas Normas do Comité Europeude Normalização (CEN) / Comité Europeu de Normalização Electrotécnica (CENELEC)7.1 Projectos em inquérito público ………………………………………………………………………… 698. Projectos de normas do Instituto Europeu de Normalização para as Telecomunicações (ETSI)8.1 Projectos em inquérito público …………………………………………………………………………… 708.2 Propostas de anulação de Normas …………………………………………………………………... 739. Projectos de normas e propostas de estudo de novas Normas de Organização Internacionalde Normalização (ISO)9.1 Projectos em inquérito público ………………………………………………………………………… 749.2 Comités Técnicos da ISO ………………………………………………………………………………... 8610. Projectos de normas e propostas de estudo de novas normas da Comissão ElectrotécnicaInternacional (IEC)10.1 Projectos em inquérito público ……………………………………………………………………….. 8911. Projectos de normas da Organização Internacional de Normalização (ISO)/ComissãoElectrotécnica Internacional (IEC)11.1 Projectos em inquérito público ………………………………………………………………………. 9912. Edição e anulação de outros documentos Normativos12.1 Directivas CNQ …………………………………………………………………………………………… 100imp DNOR-01-06 Rua António Gião, 2 2829-513 CAPARICATel +351 212 948 100 Fax +351 212 948 223 www.ipq.pt

DOCUMENTOSnormativosPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização1. Normas Portuguesas1.1 Normas Portuguesas publicadasPara cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NPENV, número, parte e data), o preço, o título e a correspondência a documentos europeus e/ouinternacionais, quando existam, o número do Termo de Homologação e a respectiva data. As NormasPortuguesas referenciadas entram em vigor no dia seguinte ao da edição desta Lista Mensal.C40 / CT 4NP EN 1150:2001 /Errata Set:2010 ( 1ª Edição)Preço: 0,00 EURVestuário de protecção Vestuário de visibilidade para uso nãoprofissional Métodos de ensaio e requisitosC140 / CT 14NP EN 311:2010 ( 1ª Edição )Preço: 10,50 EURPlacas de derivados de madeira Resistência ao arranque da camadasuperficial Método de ensaioEN 311:2002 IDTTermo de Homologação nº 2010/0227, 2010-09-10C140 / CT 14NP EN 321:2010 ( 1ª Edição )Preço: 10,50 EURPlacas de derivados de madeira Determinação da resistência àhumidade através de ensaios cíclicosEN 321:1993 IDTTermo de Homologação nº 2010/0228, 2010-09-10C140 / CT 14NP EN 13986:2010 ( 1ª Edição )Preço: 45,00 EURPlacas de derivados de madeira para utilização na construçãoCaracterísticas, avaliação da conformidade e marcaçãoEN 13986:2004 IDTTermo de Homologação nº 2010/0229, 2010-09-16C250 / CT 25NP 4495:2010 ( 1ª Edição )Preço: 7,00 EURProdutos da pesca e da aquicultura Determinação do teor total defósforo Método espectrofotométricoTermo de Homologação nº 2010/0163, 2010-07-28C370 / CT 37NP EN ISO 15914:2010 ( 1ª Edição ) Preço: 17,50 EURAlimentos para animais Determinação enzimática do teor total deamido(ISO 15914:2004)EN ISO 15914:2005 IDTTermo de Homologação nº 2010/0212, 2010-09-03C380 / CT 38NP EN 14112:2010 ( 1ª Edição )Preço: 17,50 EURDerivados de óleos e gorduras Ésteres metílicos de ácidos gordos(FAME) Determinação da estabilidade à oxidação (ensaio daoxidação acelerada)EN 14112:2003 IDTTermo de Homologação nº 2010/0169, 2010-07-29C580 / CT 58NP EN 1401-1:2010 ( 2ª Edição )Preço: 37,50 EURSistemas de tubagens de plástico enterrados para drenagem e esgotosem pressão Poli (cloreto de vinilo) não plastificado (PVC-U) Parte1: Requisitos para tubos, acessórios e sistemaEN 1401-1:2009 IDTTermo de Homologação nº 2010/0178, 2010-08-04C580 / CT 58NP EN ISO 13968:2010 ( 1ª Edição ) Preço: 10,50 EURSistemas de tubagens e condutas de plástico Tubos termoplásticosDeterminação da flexibilidade anelar(ISO 13968:2008)EN ISO 13968:2008 IDTTermo de Homologação nº 2010/0182, 2010-08-05C580 / CT 58NP EN ISO 21003-2:2010 ( 1ª Edição ) Preço: 24,50 EURSistemas de tubagens multicamada para instalações de água quente efria no interior de edifícios Parte 2: Tubos(ISO 21003-2:2008)EN ISO 21003-2:2008 IDTTermo de Homologação nº 2010/0172, 2010-07-29C580 / CT 58NP EN ISO 21003-5:2010 ( 1ª Edição ) Preço: 14,00 EURSistemas de tubagens multicamada para instalações de água quente efria no interior de edifícios Parte 5: Aptidão ao uso do sistema(ISO 21003-5:2008)EN ISO 21003-5:2008 IDTTermo de Homologação nº 2010/0188, 2010-08-05C900 / CT 90NP EN 1206:2010 ( 1ª Edição )Preço: 21,00 EURProdutos químicos utilizados no tratamento da água destinada aconsumo humano Difosfato tetrassódicoEN 1206:2005 IDTTermo de Homologação nº 2010/0077, 2010-04-12C1041 / CT 104NP EN 12390-1:2010 ( 2ª Edição )Preço: 14,00 EUREnsaios do betão endurecido Parte 1: Forma, dimensões e outrosrequisitos para o ensaio de provetes e para os moldesEN 12390-1:2000 IDT;EN 12390-1:2000 /AC :2004 IDTTermo de Homologação nº 2010/0215, 2010-09-03C1180 / CT 118NP EN 14617-1:2010 ( 1ª Edição )Preço: 10,50 EURPedra aglomerada Métodos de ensaio Parte 1: Determinação damassa volúmica aparente e da absorção de águaEN 14617-1:2005 IDTTermo de Homologação nº 2010/0191, 2010-08-10C1180 / CT 118NP EN 14617-2:2010 ( 1ª Edição )Preço: 14,00 EURPedra aglomerada Métodos de ensaio Parte 2: Determinação daresistência à flexão (encurvamento)EN 14617-2:2008 IDTTermo de Homologação nº 2010/0192, 2010-08-10Lista mensal ▪ documentos normativos imp DNOR-01-06 3 14 Outubro 2010

DOCUMENTOSnormativosC1180 / CT 118NP EN 14617-4:2010 ( 1ª Edição )Preço: 14,00 EURPedra aglomerada Métodos de ensaio Parte 4: Determinação daresistência ao desgasteEN 14617-4:2005 IDTTermo de Homologação nº 2010/0193, 2010-08-10C1180 / CT 118NP EN 14617-5:2010 ( 1ª Edição )Preço: 10,50 EURPedra aglomerada Métodos de ensaio Parte 5: Determinação daresistência ao gelo e degeloEN 14617-5:2005 IDTTermo de Homologação nº 2010/0194, 2010-08-10C1180 / CT 118NP EN 14617-6:2010 ( 1ª Edição )Preço: 10,50 EURPedra aglomerada Métodos de ensaio Parte 6: Determinação daresistência ao choque térmicoEN 14617-6:2005 IDTTermo de Homologação nº 2010/0195, 2010-08-10C1180 / CT 118NP EN 14617-8:2010 ( 1ª Edição )Preço: 14,00 EURPedra aglomerada Métodos de ensaio Parte 8: Determinação daresistência às ancoragens (nos orifícios para cavilhas)EN 14617-8:2007 IDTTermo de Homologação nº 2010/0196, 2010-08-10C1180 / CT 118NP EN 14617-9:2010 ( 1ª Edição )Preço: 7,00 EURPedra aglomerada Métodos de ensaio Parte 9: Determinação daresistência ao impactoEN 14617-9:2005 IDTTermo de Homologação nº 2010/0197, 2010-08-10C1180 / CT 118NP EN 14617-10:2010 ( 1ª Edição )Preço: 14,00 EURPedra aglomerada Métodos de ensaio Parte 10: Determinação daresistência a agentes químicosEN 14617-10:2005 IDTTermo de Homologação nº 2010/0198, 2010-08-10C1180 / CT 118NP EN 14617-11:2010 ( 1ª Edição )Preço: 10,50 EURPedra aglomerada Métodos de ensaio Parte 11: Determinação docoeficiente de dilatação térmica linearEN 14617-11:2005 IDTTermo de Homologação nº 2010/0199, 2010-08-10C1180 / CT 118NP EN 14617-16:2010 ( 1ª Edição )Preço: 14,00 EURPedra aglomerada Métodos de ensaio Parte 16: Determinação dasdimensões, das características geométricas e da qualidade dasuperfície de ladrilhos modularesEN 14617-16:2005 IDTTermo de Homologação nº 2010/0200, 2010-08-10C1180 / CT 118NP EN 15388:2010 ( 1ª Edição )Preço: 14,00 EURPedra aglomerada Chapas e produtos à medida para tampos debancadas de casas de banho e de cozinhasEN 15388:2008 IDTTermo de Homologação nº 2010/0171, 2010-07-29E100 / CT 1NP 2626-447:2010 ( 1ª Edição )Preço: 17,50 EURVocabulário Electrotécnico Internacional Capitulo 447: Relés demediçãoTermo de Homologação nº 2010/0233, 2010-09-27Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoLista mensal ▪ documentos normativos imp DNOR-01-06 4 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização1.2 Normas Portuguesas anuladasPara cada referência, menciona-se a designação codificada (prefixos NP, NP EN, NP HD ou NPENV, número, parte e data), o título, a correspondência a documentos europeus e/ou internacionaisquando existam, o número do Termo de (Anulação, Homologação ou Adopção) e a respectivadata, bem como a referência do documento que a substitui. As anulações das Normas Portuguesasreferenciadas tornam-se efectivas no dia seguinte ao da seguinte ao da edição desta Lista Mensal.C40 / CT 4NP EN ISO 105-E03:1997 ( 1ª Edição )Têxteis Solidez dos tintos Parte E03: Ensaio de solidez à águaclorada (água da piscina)(ISO 105-E03:1994)EN ISO 105-E03:1996 IDTAnulada em: 2010-09-28Substituida por: EN ISO 105-E03:2010C40 / CT 4NP EN ISO 105-E07:1999 ( 1ª Edição )Têxteis Ensaios de solidez dos tintos Parte E07: Solidez dos tintos àgota de água(ISO 105-E07:1989)EN ISO 105-E07:1997 IDTAnulada em: 2010-09-28Substituida por: EN ISO 105-E07:2010C40 / CT 4NP EN ISO 105-E09:1998 ( 1ª Edição )Têxteis Solidez dos tintos Parte E09: Solidez dos tintos à água aferver(ISO 105-E09:1989)EN ISO 105-E09:1997 IDTAnulada em: 2010-09-28Substituida por: EN ISO 105-E09:2010C40 / CT 4NP EN ISO 105-E12:1998 ( 1ª Edição )Têxteis Solidez dos tintos Parte E12: Solidez dos tintos aopisoamento. Pisoamento alcalino(ISO 105-E12:1989)EN ISO 105-E12:1997 IDTAnulada em: 2010-09-28Substituida por: EN ISO 105-E12:2010C40 / CT 4NP EN ISO 11058:2003 ( 1ª Edição )Geotêxteis e produtos relacionados Determinação dascaracterísticas de permeabilidade à água normal ao plano, semconfinamento(ISO 11058:1999)EN ISO 11058:1999 IDTAnulada em: 2010-09-28Substituida por: EN ISO 11058:2010C40 / CT 4NP EN ISO 12958:2005 ( 1ª Edição )Geotêxteis e produtos relacionados Determinação da capacidade deescoamento no seu plano(ISO 12958:1999)EN ISO 12958:1999 IDTAnulada em: 2010-09-28Substituida por: EN ISO 12958:2010C160 / CT 16NP EN 14085:2003 ( 1ª Edição )Revestimentos de piso resilientes Especificação dos painéis derevestimento de piso para instalação flutuanteEN 14085:2003 IDTAnulada em: 2010-09-28Substituida por: EN 14085:2010C390 / CT 39NP EN ISO 8292:1997 ( 1ª Edição )Óleos e gorduras de origem animal e vegetal Determinação do teorde sólidos em gorduras. Método de ressonância magnética nuclearpor impulsos(ISO 8292:1991)EN ISO 8292:1995 IDTAnulada em: 2010-09-28Substituida por: EN ISO 8292-1:2010;EN ISO 8292-2:2010C870 / CT 87NP EN 739:2000 ( 1ª Edição )Ligações de mangueiras de baixa pressão para utilização com gasesmedicinaisEN 739:1998 IDTAnulada em: 2010-09-28Substituida por: EN ISO 5359:2008C870 / CT 87NP EN 13060:2009 ( 1ª Edição )Pequenos esterilizadores a vapor de águaEN 13060:2004 IDTAnulada em: 2010-09-28Substituida por: EN 13060-:2004+A2:2010C1040 / CT 104NP EN 12390-1:2003 ( 1ª Edição )Ensaios do betão endurecido Parte 1: Forma, dimensões e outrosrequisitos para o ensaio de provetes e para os moldesEN 12390-1:2000 IDTAnulada em: 2010-09-28Substituida por: NP EN 12390-1:2010E6100 / CTE 61NP EN 60730-2-13:2007 ( 1ª Edição )Dispositivos de comando eléctrico automáticos para uso doméstico eanálogo Parte 2-13: Regras particulares para os dispositivos decomando sensíveis à humidade(IEC 60730-2-13:1995, modificada + A1:1997 + A2:2000,modificada)EN 60730-2-13:1998 IDT;EN 60730-2-13:1998 /CORRIGENDUMMayAnulada em: 2010-09-28Substituida por: EN 60730-2-13:2008;NP EN 60730-2-13:2009M011 /NP EN 60601-2-37:2003 ( 1ª Edição )Equipamento eléctrico para medicina Parte 2-37: Requisitosparticulares para a segurança dos dispositivos de diagnóstico emonitorização a ultra-sons(IEC 60601-2-37:2001)EN 60601-2-37:2001 IDTAnulada em: 2010-09-28Substituida por: EN 60601-2-37:2008M085/NP EN 1034-3:2002 ( 1ª Edição )Segurança das máquinas Requisitos de segurança para a concepção econstrução de máquinas de fabrico e acabamento de papel Parte 3:Lista mensal ▪ documentos normativos imp DNOR-01-06 5 14 Outubro 2010

DOCUMENTOSnormativosBobinadoras, máquinas de cortar bobinas e máquinas de fabrico depapel duploEN 1034-3:1999 IDTAnulada em: 2010-09-06Substituida por: EN 1034-3:1999+A1:2009Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoLista mensal ▪ documentos normativos imp DNOR-01-06 6 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização1.3 Normas Portuguesas em re-exameCom o objectivo de se assegurar a actualidade das normas integrantes do acervo normativonacional, as Normas Portuguesas devem ser objecto de um re-exame periódico.Mensalmente, o IPQ colocará em inquérito público, por um período de 30 dias úteis, através daLista Mensal Normas e do site, uma lista de normas portuguesas pertencentes a um determinadoescalão etário.Para cada referência, menciona-se a designação codificada (prefixo NP, número, parte e data), otítulo e a respectiva data, bem como o seu autor.Pretende-se com este inquérito público, que os interessados que pretendam dar os seus contributos opossam fazer, para cada uma das normas portuguesas constantes na presente listagem, respondendoaos seguintes pontos, tendo em conta a vossa experiência:1 - Avaliação em termos de actualidade, a responder em alternativa:‣ A norma portuguesa está actual ?‣ A norma portuguesa deve ser revista ?‣ A norma portuguesa está obsoleta ?2 - Eventual legislação relacionada:‣ A norma portuguesa está referida em legislação ? Se sim, qual ?3 - ComentárioNOTA: Os interessados são convidados a pronunciarem-se somente sobre as normas que entendamconveniente, devendo enviar a informação ao Serviço de Normalização (NOR@mail.ipq.pt).LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 7 14 Outubro 2010

DOCUMENTOSnormativosEN 12350-11:2010 ( 1ª Edição )Testing fresh concrete Part 11: Self-compacting concrete - Sievesegregation testTermo de Adopção nº2010/ 1253, 2010-09-28EN 12350-12:2010 ( 1ª Edição )Testing fresh concrete Part 12: Self-compacting concrete - Jring testTermo de Adopção nº2010/ 1254, 2010-09-28EN 12697-47:2010 ( 1ª Edição )Bituminous mixtures Test methods for hot mix asphalt Part 47:Determination of the ash content of natural asphaltsTermo de Adopção nº2010/ 1255, 2010-09-28EN 12735-1:2010 ( 2ª Edição )Copper and copper alloys Seamless, round copper tubes for airconditioning and refrigeration Part 1: Tubes for piping systemsTermo de Adopção nº2010/ 1256, 2010-09-28EN 12735-2:2010 ( 2ª Edição )Copper and copper alloys Seamless, round copper tubes for airconditioning and refrigeration Part 2: Tubes for equipmentTermo de Adopção nº2010/ 1257, 2010-09-28EN 13141-2:2010 ( 2ª Edição )Ventilation for buildings Performance testing ofcomponents/products for residential ventilation Part 2: Exhaust andsupply air terminal devicesTermo de Adopção nº2010/ 1258, 2010-09-28EN 13309:2010 ( 2ª Edição )Construction machinery Electromagnetic compatibility of machineswith internal power supplyTermo de Adopção nº2010/ 1259, 2010-09-28EN 13674-2:2006+A1:2010 ( 1ª Edição )Railway applications Track - Rail Part 2: Switch and crossing railsused in conjunction with Vignole railway rails 46 kg/m and aboveTermo de Adopção nº2010/ 1260, 2010-09-28EN 13674-3:2006+A1:2010 ( 1ª Edição )Railway applications Track - Rail Part 3: Check railsTermo de Adopção nº2010/ 1261, 2010-09-28EN 13823:2010 ( 2ª Edição )Reaction to fire tests for building products Building productsexcluding floorings exposed to the thermal attack by a singleburning itemTermo de Adopção nº2010/ 1262, 2010-09-28EN 13941-:2009+A1:2010 ( 1ª Edição )Design and installation of preinsulated bonded pipe systems fordistrict heatingTermo de Adopção nº2010/ 1263, 2010-09-28EN 14516-:2006+A1:2010 ( 1ª Edição )Baths for domestic purposesTermo de Adopção nº2010/ 1264, 2010-09-28EN 14527-:2006+A1:2010 ( 1ª Edição )Shower trays for domestic purposesTermo de Adopção nº2010/ 1265, 2010-09-28EN 14730-1:2006+A1:2010 ( 1ª Edição )Railway applications Track - Aluminothermic welding of railsPart 1: Approval of welding processesTermo de Adopção nº2010/ 1266, 2010-09-28EN 14938-2:2010 ( 1ª Edição )Copper and copper alloys Determination of bismuth content -Part 2: Flame atomic absorption spectrometric method (FAAS)Termo de Adopção nº2010/ 1267, 2010-09-28Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoEN 14974-:2006+A1:2010 ( 1ª Edição )Facilities for users of roller sports equipment Safety requirementsand test methodsTermo de Adopção nº2010/ 1268, 2010-09-28EN 14975-:2006+A1:2010 ( 1ª Edição )Loft ladders Requirements, marking and testingTermo de Adopção nº2010/ 1269, 2010-09-28EN 15023-3:2010 ( 1ª Edição )Copper and copper alloys Determination of nickel contentPart 3: Flame atomic absorption spectrometric method (FAAS)Termo de Adopção nº2010/ 1270, 2010-09-28EN 15025:2010 ( 1ª Edição )Copper and copper alloys Determination of magnesium contentFlame atomic absorption spectrometric method (FAAS)Termo de Adopção nº2010/ 1271, 2010-09-28EN 15365:2010 ( 1ª Edição )Advanced technical ceramics Mechanical properties of ceramicfibres at high temperature in a non-reactive environmentDetermination of creep behaviour by the cold end methodTermo de Adopção nº2010/ 1272, 2010-09-28EN 15599-1:2010 ( 1ª Edição )Thermal insulation products for building equipment and industrialinstallations In-situ thermal insulation formed from expanded perlite(EP) products Part 1: Specification for bonded and loose-fillproducts before installationTermo de Adopção nº2010/ 1273, 2010-09-28EN 15599-2:2010 ( 1ª Edição )Thermal insulation products for building equipment and industrialinstallations In-situ thermal insulation formed from expanded perlite(EP) products Part 2: Specification for the installed productsTermo de Adopção nº2010/ 1274, 2010-09-28EN 15600-1:2010 ( 1ª Edição )Thermal insulation products for building equipment and industrialinstallations In-situ thermal insulation formed from exfoliatedvermiculite (EV) products Part 1: Specification for bonded andloose-fill products before installationTermo de Adopção nº2010/ 1275, 2010-09-28EN 15600-2:2010 ( 1ª Edição )Thermal insulation products for building equipment and industrialinstallations In-situ thermal insulation formed from exfoliatedvermiculite (EV) products Part 2: Specification for the installedproductsTermo de Adopção nº2010/ 1276, 2010-09-28EN 15605:2010 ( 1ª Edição )Copper and copper alloys Inductively coupled plasma opticalemission spectrometryTermo de Adopção nº2010/ 1277, 2010-09-28EN 15878:2010 ( 1ª Edição )Steel static storage systems Terms and definitionsTermo de Adopção nº2010/ 1278, 2010-09-28EN 15907:2010 ( 1ª Edição )Film identification Enhancing interoperability of metadataElement sets and structuresTermo de Adopção nº2010/ 1279, 2010-09-28EN 15915:2010 ( 1ª Edição )Copper and copper alloysDetermination of silver contentFlame atomic absorption spectrometric method (FAAS)Termo de Adopção nº2010/ 1280, 2010-09-28Lista mensal ▪ documentos normativos imp DNOR-01-06 9 14 Outubro 2010

DOCUMENTOSnormativosEN 15916-2:2010 ( 1ª Edição )Copper and copper alloysDetermination of tellurium content Part 2: Medium telluriumcontent - Flame atomic absorption spectrometric method (FAAS)Termo de Adopção nº2010/ 1281, 2010-09-28EN 60079-29-4:2010 ( 1ª Edição )Explosive atmospheres Part 29-4: Gas detectors - Performancerequirements of open path detectors for flammable gases(IEC 60079-29-4:2009)Termo de Adopção nº2010/ 1303, 2010-09-28EN 60297-3-106:2010 ( 1ª Edição )Mechanical structures for electronic equipment - Dimensions ofmechanical structures of the 482,6 mm (19 in) series Part 3-106:Adaptation dimensions for subracks and chassis applicable withmetric cabinets or racks in accordance with IEC 60917-2-1(IEC 60297-3-106: 2010)Termo de Adopção nº2010/ 1304, 2010-09-28EN 60317-12:2010 ( 2ª Edição )Specifications for particular types of winding wires Part 12:Polyvinyl acetal enamelled round copper wire, class 120(IEC 60317-12:2010)Termo de Adopção nº2010/ 1305, 2010-09-28EN 60317-43:1997 /A 1:2010 ( 1.0ª Edição )Specifications for particular types of winding wires Part 43:Aromatic polyimide tape wrapped round copper wire, class 240(IEC 60317-43:1997/A1:2010)Termo de Adopção nº2010/ 1306, 2010-09-28EN 60317-44:1997 /A 1:2010 ( 1ª Edição )Specifications for particular types of winding wires Part 44:Aromatic polyimide tape wrapped rectangular copper wire, class240(IEC 60317-44:1997/A1:2010)Termo de Adopção nº2010/ 1307, 2010-09-28Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoElectrical and loading characteristics of X -ray tube assemblies formedical diagnosis(IEC 60613:2010)Termo de Adopção nº2010/ 1313, 2010-09-28EN 60704-2-2:2010 ( 2ª Edição )Household and similar electrical appliances - Test code for thedetermination of airborne acoustical noise Part 2-2: Particularrequirements for fan heaters(IEC 60704-2-2:2009)Termo de Adopção nº2010/ 1314, 2010-09-28EN 60728-1-1:2010 ( 1ª Edição )Cable networks for television signals, sound signals andinteractive services Part 1-1: RF cabling for two way homenetworks(IEC 60728-1-1:2010)Termo de Adopção nº2010/ 1315, 2010-09-28EN 60745-2-15:2009 /A 1:2010 ( 2ª Edição )Hand-held motor-operated electric tools - Safety Part 2-15:Particular requirements for hedge trimmers(IEC 60745-2-15:2006/A1:2009)Termo de Adopção nº2010/ 1316, 2010-09-28EN 60917-2-4:2010 ( 1ª Edição )Modular order for the development of mechanical structures forelectronic equipment practices Part 2-4: Sectional specification -Interface co-ordination dimensions for the 25 mm equipmentpractice - Adaptation dimensions for subracks or chassis applicablein cabinets or racks in accordance with IEC 60297-3-100 (19 in)(IEC 60917-2-4:2010)Termo de Adopção nº2010/ 1317, 2010-09-28EN 60947-4-1:2010 ( 3ª Edição )Low-voltage switchgear and controlgear Part 4-1: Contactors andmotor-starters - Electromechanical contactors and motor-starters(IEC 60947-4-1:2009)Termo de Adopção nº2010/ 1318, 2010-09-28EN 60512-9-1:2010 ( 1ª Edição )Connectors for electronic equipment - Tests and measurements Part9-1: Endurance tests - Test 9a: Mechanical operation(IEC 60512-9-1:2010)Termo de Adopção nº2010/ 1308, 2010-09-28EN 60598-2-20:2010 ( 3ª Edição )Luminaires Part 2-20: Particular requirements - Lighting chains(IEC 60598-2-20:2010)Termo de Adopção nº2010/ 1309, 2010-09-28EN 60601-1-6:2010 ( 3ª Edição )Medical electrical equipment Part 1-6: General requirements forbasic safety and essential performance - Collateral standard:Usability(IEC 60601-1-6:2010)Termo de Adopção nº2010/ 1310, 2010-09-28EN 60601-2-28:2010 ( 2ª Edição )Medical electrical equipment Part 2-28: Particular requirements forbasic safety and essential performance of X-ray tube assemblies formedical diagnosis(IEC 60601-2-28:2010)Termo de Adopção nº2010/ 1311, 2010-09-28EN 60601-2-52:2010 ( 1ª Edição )Medical electrical equipment Part 2-52: Particular requirements forbasic safety and essential performance of medical beds(IEC 60601-2-52:2009)Termo de Adopção nº2010/ 1312, 2010-09-28EN 61191-6:2010 ( 1ª Edição )Printed board assemblies Part 6: Evaluation criteria for voids insoldered joints of BGA and LGA and measurement method(IEC 61191-6:2010)Termo de Adopção nº2010/ 1319, 2010-09-28EN 61280-2-1:2010 ( 2ª Edição )Fibre optic communication subsystem basic test procedures Part2-1:Digital systems - Receiver sensitivity and overloadmeasurement(IEC 61280-2-1:2010)Termo de Adopção nº2010/ 1320, 2010-09-28EN 61391-2:2010 ( 1ª Edição )Ultrasonics - Pulse-echo scanners Part 2: Measurement of maximumdepth of penetration and local dynamic range(IEC 61391-2:2010)Termo de Adopção nº2010/ 1321, 2010-09-28EN 61760-3:2010 ( 1ª Edição )Surface mounting technology Part 3: Standard method for thespecification of components for Through Hole Reflow (THR)soldering(IEC 61760-3:2010)Termo de Adopção nº2010/ 1322, 2010-09-28EN 62282-6-100:2010 ( 1ª Edição )Fuel cell technologies Part 6-100: Micro fuel cell power systems -Safety(IEC 62282-6-100:2010)Termo de Adopção nº2010/ 1323, 2010-09-28EN 60613:2010 ( 2ª Edição )EN 62489-1:2010 ( 1ª Edição )Lista mensal ▪ documentos normativos imp DNOR-01-06 10 14 Outubro 2010

DOCUMENTOSnormativosElectroacoustics - Audio-frequency induction loop systems forassisted hearing Part 1: Methods of measuring and specifying theperformance of system components(IEC 62489-1:2010)Termo de Adopção nº2010/ 1324, 2010-09-28EN 62576:2010 ( 1ª Edição )Electric double-layer capacitors for use in hybrid electric vehicles -Test methods for electrical characteristics(IEC 62576:2009)Termo de Adopção nº2010/ 1325, 2010-09-28EN 62616:2010 ( 1ª Edição )Maritime navigation and radiocommunication equipment andsystems - Bridge navigational watch alarm system (BNWAS)(IEC 62616:2010)Termo de Adopção nº2010/ 1326, 2010-09-28EN 300676-2:2010 ( V1.4.1 )Ground-based VHF hand-held, mobile and fixed radio transmitters,receivers and transceivers for the VHF aeronautical mobile serviceusing amplitude modulation Part 2: Harmonized EN coveringessential requirements of article 3.2 of the R&TTE DirectiveTermo de Adopção nº2010/ 1327, 2010-09-28EN ISO 105-E05:2010 ( 3ª Edição )Textiles Tests for colour fastness Part E05: Colour fastness tospotting: Acid(ISO 105-E05:2010)Termo de Adopção nº2010/ 1282, 2010-09-28EN ISO 2143:2010 ( 1ª Edição )Anodizing of aluminium and its alloys Estimation of loss ofabsorptive power of anodic oxidation coatings after sealing Dye-spottest with prior acid treatment(ISO 2143:2010)Termo de Adopção nº2010/ 1283, 2010-09-28EN ISO 2931:2010 ( 1ª Edição )Anodizing of aluminium and its alloys Assessment of quality ofsealed anodic oxidation coatings by measurement of admittance(ISO 2931:2010)Termo de Adopção nº2010/ 1284, 2010-09-28EN ISO 3210:2010 ( 1ª Edição )Anodizing of aluminium and its alloys Assessment of quality ofsealed anodic oxidation coatings by measurement of the loss ofmass after immersion in phosphoric acid/chromic acid solution(ISO 3210:2010)Termo de Adopção nº2010/ 1285, 2010-09-28EN ISO 6581:2010 ( 1ª Edição )Anodizing of aluminium and its alloys Determination of thecomparative fastness to ultraviolet light and heat of colouredanodic oxidation coatings (ISO 6581:2010)Termo de Adopção nº2010/ 1286, 2010-09-28EN ISO 7231:2010 ( 2ª Edição )Polymeric materials, cellular, flexible Determination of air flowvalue at constant pressure-drop(ISO 7231:2010)Termo de Adopção nº2010/ 1287, 2010-09-28EN ISO 7599:2010 ( 1ª Edição )Anodizing of aluminium and its alloys General specifications foranodic oxidation coatings on aluminium(ISO 7599:2010)Termo de Adopção nº2010/ 1288, 2010-09-28EN ISO 10765:2010 ( 1ª Edição )Footwear Test method for the characterization of elastic materialsTensile performance(ISO 10765:2010)Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTermo de Adopção nº2010/ 1289, 2010-09-28EN ISO 10768:2010 ( 1ª Edição )Footwear Test method for the determination of the resistance ofelastic materials for footwear to repeated extension Fatigueresistance(ISO 10768:2010)Termo de Adopção nº2010/ 1290, 2010-09-28EN ISO 11990-2:2010 ( 1ª Edição )Lasers and laser-related equipment Determination of laser resistanceof tracheal tubes Part 2: Tracheal tube cuffs(ISO 11990-2:2010)Termo de Adopção nº2010/ 1291, 2010-09-28EN ISO 12567-1:2010 ( 2ª Edição )Thermal performance of windows and doors Determination ofthermal transmittance by the hot-box method Part 1: Completewindows and doors(ISO 12567-1:2010)Termo de Adopção nº2010/ 1292, 2010-09-28EN ISO 13349:2010 ( 2ª Edição )Fans Vocabulary and definitions of categories(ISO 13349:2010)Termo de Adopção nº2010/ 1293, 2010-09-28EN ISO 14122-4:2004 /A 1:2010 ( 1ª Edição )Safety of machinery Permanent means of access to machineryPart 4: Fixed ladders - Amendment 1(ISO 14122-4:2004/Amd 1:2010)Termo de Adopção nº2010/ 1294, 2010-09-28EN ISO 24534-1:2010 ( 1ª Edição )Automatic vehicle and equipment identification ElectronicRegistration Identification (ERI) for vehicles Part 1: Architecture(ISO 24534-1:2010)Termo de Adopção nº2010/ 1295, 2010-09-28EN ISO 24534-2:2010 ( 1ª Edição )Automatic vehicle and equipment identification ElectronicRegistration Identification (ERI) for vehicles Part 2: Operationalrequirements(ISO 24534-2:2010)Termo de Adopção nº2010/ 1296, 2010-09-28EN ISO 24534-3:2010 ( 1ª Edição )Automatic vehicle and equipment identification ElectronicRegistration Identification (ERI) for vehicles Part 3: Vehicle data(ISO 24534-3:2010)Termo de Adopção nº2010/ 1297, 2010-09-28EN ISO 24534-4:2010 ( 1ª Edição )Automatic vehicle and equipment identification ElectronicRegistration Identification (ERI) for vehicles Part 4: Securecommunications using asymmetrical techniques(ISO 24534-4:2010)Termo de Adopção nº2010/ 1298, 2010-09-28EN ISO 25178-601:2010 ( 1ª Edição )Geometrical product specifications (GPS) Surface texture: Areal Part601: Nominal characteristics of contact (stylus) instruments(ISO 25178-601:2010)Termo de Adopção nº2010/ 1299, 2010-09-28EN ISO 25178-602:2010 ( 1ª Edição )Geometrical product specifications (GPS) Surface texture: ArealPart 602: Nominal characteristics of non-contact (confocalchromatic probe) instruments(ISO 25178-602:2010)Termo de Adopção nº2010/ 1300, 2010-09-28Lista mensal ▪ documentos normativos imp DNOR-01-06 11 14 Outubro 2010

DOCUMENTOSnormativosEN ISO 25178-701:2010 ( 1ª Edição )Geometrical product specifications (GPS) Surface texture: ArealPart 701: Calibration and measurement standards for contact(stylus) instruments(ISO 25178-701:2010)Termo de Adopção nº2010/ 1301, 2010-09-28EN ISO 28158:2010 ( 1ª Edição )Dentistry Integrated dental floss and handles(ISO 28158:2010)Termo de Adopção nº2010/ 1302, 2010-09-28Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoLista mensal ▪ documentos normativos imp DNOR-01-06 12 14 Outubro 2010

DOCUMENTOSnormativosPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização2. Normas Europeias Publicadas2.1 CENNormas Europeias aprovadas na área não electrotécnica pelo Comité Europeu de Normalização(CEN), e pelo Comité Europeu para a Normalização do Ferro e do Aço (ECISS).Para cada referência, menciona-se o comité técnico, a designação codificada e o título.CWA 16180:2010 ( Ed. 1 )The CEN ORCHID Roadmap Standardising Information Across thePlant Engineering Supply Chain Part 1: Direction and FrameworkCWA 16180-2:2010 ( Ed. 1 )The CEN ORCHID Roadmap Standardising Information Across thePlant Engineering Supply Chain Part 2: Implementation Guide(ISO 10140-3:2010)TC 126EN ISO 10140-4:2010 ( Ed. 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 4: Measurement procedures and requirements(ISO 10140-4:2010)CWA 16180-3:2010 ( Ed. 1 )The CEN ORCHID Roadmap Standardising Information Across thePlant Engineering Supply Chain Part 3: Standards LandscapeEN 558:2008 /AC :2010 ( Ed. 1 )Industrial valves Face-to-face and centre-to-face dimensions ofmetal valves for use in flanged pipe systems PN and Classdesignated valvesTC 12EN ISO 21457:2010 ( Ed. 1 )Petroleum, petrochemical and natural gas industries Materialsselection and corrosion control for oil and gas production systems(ISO 21457:2010)TC 51EN 459-1:2010 ( Ed. 2 )Building lime Part 1: Definitions, specifications and conformitycriteriaTC 51EN 459-2:2010 ( Ed. 3 )Building lime Part 2: Test methodsTC 55EN ISO 11609:2010 ( Ed. 2 )Dentistry Dentifrices Requirements, test methods and marking(ISO 11609:2010)TC 112EN 312:2010 ( Ed. 2 )Particleboards SpecificationsTC 126EN ISO 10140-1:2010 ( Ed. 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 1: Application rules for specific products(ISO 10140-1:2010)TC 126EN ISO 10140-2:2010 ( Ed. 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 2: Measurement of airborne sound insulation(ISO 10140-2:2010)TC 126EN ISO 10140-3:2010 ( Ed. 1 )Acoustics Laboratory measurement of sound insulation ofbuilding elements Part 3: Measurement of impact sound insulationTC 126EN ISO 10140-5:2010 ( Ed. 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 5: Requirements for test facilities and equipment(ISO 10140-5:2010)TC 126EN ISO 15186-2:2010 ( Ed. 1 )Acoustics Measurement of sound insulation in buildings and ofbuilding elements using sound intensity Part 2: Field measurements(ISO 15186-2:2003)TC 126EN ISO 15186-3:2010 ( Ed. 1 )Acoustics Measurement of sound insulation in buildings and ofbuilding elements using sound intensity Part 3: Laboratorymeasurements at low frequencies(ISO 15186-3:2002)TC 132EN ISO 2128:2010 ( Ed. 1 )Anodizing of aluminium and its alloys Determination of thicknessof anodic oxidation coatings Non-destructive measurement bysplit-beam microscope(ISO 2128:2010)TC 132EN ISO 3211:2010 ( Ed. 1 )Anodizing of aluminium and its alloys Assessment of resistance ofanodic oxidation coatings to cracking by deformation(ISO 3211:2010)TC 132EN ISO 7759:2010 ( Ed. 1 )Anodizing of aluminium and its alloys Measurement of reflectancecharacteristics of aluminium surfaces using a goniophotometer oran abridged goniophotometer (ISO 7759:2010)TC 136EN 15312-:2007+A1:2010 ( Ed. 1 )Free access multi-sports equipment Requirements, including safetyand test methodsTC 151EN 12629-5-1:2003+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 5-1: Pipe making machinesmanufacturing in the vertical axisLista mensal ▪ documentos normativos imp DNOR-01-06 13 14 Outubro 2010

DOCUMENTOSnormativosTC 151EN 12629-5-2:2003+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 5-2: Pipe making machinesmanufacturing in the horizontal axisPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 155EN 1555-3:2010 ( Ed. 2 )Plastics piping systems for the supply of gaseous fuelsPolyethylene (PE) Part 3: FittingsTC 151EN 12629-5-3:2003+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 5-3: Pipe prestressingmachinesTC 151EN 12629-5-4:2003+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 5-4: Concrete pipecoating machinesTC 151EN 12629-1:2000+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 1: Common requirementsTC 151EN 12629-2:2002+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 2: Block making machinesTC 151EN 12629-3:2002+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 3: Slide and turntablemachinesTC 151EN 12629-4:2001+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 4: Concrete roof tilemaking machinesTC 151EN 12629-6:2004+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 6: Stationary and mobileequipment for the manufacture of precast reinforced productsTC 151EN 12629-7:2004+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 7: Stationary and mobileequipment for long line manufacture of prestressed productsTC 151EN 12629-8:2002+A1:2010 ( Ed. 1 )Machines for the manufacture of constructional products fromconcrete and calcium-silicate Safety Part 8: Machines and equipmentfor the manufacture of constructional products from calcium-silicate(and concrete)TC 155CEN ISO/TS 21003-7:2008 /A 1:2010 ( Ed. 1 )Multilayer piping systems for hot and cold water installations insidebuildings Part 7: Guidance for the assessment of conformity -Amendment 1 (ISO/TS 21003-7:2008/Amd 1:2010)TC 155EN 1555-1:2010 ( Ed. 2 )Plastics piping systems for the supply of gaseous fuelsPolyethylene (PE) Part 1: GeneralTC 155EN 1555-2:2010 ( Ed. 2 )Plastics piping systems for the supply of gaseous fuelsPolyethylene (PE) Part 2: PipesTC 155EN 1555-5:2010 ( Ed. 2 )Plastics piping systems for the supply of gaseous fuelsPolyethylene (PE) Part 5: Fitness for purpose of the systemTC 155EN 14982-:2006+A1:2010 ( Ed. 1 )Plastics piping and ducting systems Thermoplastics shafts or risersfor inspection chambers and manholes Determination of ringstiffnessTC 191EN 13565-2:2009 /AC :2010 ( Ed. 2 )Fixed firefighting systems Foam systems Part 2: Design,construction and maintenanceTC 192EN 15767-3:2010 ( Ed. 1 )Portable equipment for projecting extinguishing agents supplied byfire fighting pumps Portable monitors Part 3: Foam devicesTC 193EN ISO 8510-2:2010 ( Ed. 1 )Adhesives Peel test for a flexible-bonded-to-rigid test specimenassembly Part 2: 180 degree peel(ISO 8510-2:2006)TC 203CEN/TR 16017:2010 ( Ed. 1 )Guide to the use of EN 598TC 216EN 13623:2010 ( Ed. 1 )Chemical disinfectants and antiseptics Quantitative suspension testfor the evaluation of bactericidal activity against Legionella ofchemical disinfectants for aqueous systems Test method andrequirements (phase 2, step 1)TC 218EN ISO 8029:2010 ( Ed. 1 )Plastics hose General-purpose collapsible water hose,textilereinforcedSpecification (ISO 8029:2007)TC 225EN ISO 15423:2010 ( Ed. 1 )Information technology Automatic identification and data capturetechniques Bar code scanner and decoder performance testing(ISO/IEC 15423:2009)TC 261EN ISO 4180:2010 ( Ed. 1 )Packaging Complete, filled transport packages General rules for thecompilation of performance test schedules(ISO 4180:2009)TC 275EN ISO 13720:2010 ( Ed. 1 )Meat and meat products Enumeration of presumptive Pseudomonasspp.(ISO 13720:2010)TC 278CEN ISO/TS 14907-1:2010 /AC :2010 ( Ed. 1 )Road transport and traffic telematics Electronic fee collection -Test procedures for user and fixed equipment Part 1: Description oftest procedures(ISO/TS 14907-1:2010/Cor 1:2010)Lista mensal ▪ documentos normativos imp DNOR-01-06 14 14 Outubro 2010

DOCUMENTOSnormativosTC 288EN 1536:2010 ( Ed. 2 )Execution of special geotechnical work Bored pilesTC 288EN 1538:2010 ( Ed. 2 )Execution of special geotechnical work Diaphragm wallsPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoAerospace series Bolts, normal bi-hexagonal head, coarse tolerancenormal shank, long thread, in alloy steel, cadmium platedClassification: 1 100 MPa (at ambient temperature) / 235 °CTC AECMAEN 4473:2010 ( Ed. 1 )Aerospace series Aluminium pigmented coatings for fastenersTechnical specificationTC 343CEN/TR 15404:2010 ( Ed. 1 )Solid recovered fuels Methods for the determination of ash meltingbehaviour by using characteristic temperaturesTC 343CEN/TS 15405:2010 ( Ed. 2 )Solid recovered fuels Determination of density of pellets andbriquettesTC 343CEN/TS 15406:2010 ( Ed. 2 )Solid recovered fuels Determination of bridging properties of bulkmaterialTC 343CEN/TS 15639:2010 ( Ed. 2 )Solid recovered fuels Determination of mechanical durability ofpelletsTC 346EN 15757:2010 ( Ed. 1 )Conservation of Cultural Property Specifications for temperatureand relative humidity to limit climate-induced mechanical damagein organic hygroscopic materialsTC 346EN 15758:2010 ( Ed. 1 )Conservation of Cultural Property Procedures and instruments formeasuring temperatures of the air and the surfaces of objectsTC CSS02EN ISO 8362-2:2010 ( Ed. 1 )Injection containers and accessories Part 2: Closures for injectionvials(ISO 8362-2:2008)TC AECMAEN 4655:2010 ( Ed. 1 )Aerospace series Steel FE-PM1506 (X1CrNiMoAlTi12-10-2)Vacuum induction melted and consumable electrode remelted -Solution treated and precipitation treated - Bars - a or D =1 400 MPaTC AECMAEN 4700-001:2010 ( Ed. 1 )Aerospace series Steel and heat resisting alloys - Wrought products -Technical specification Part 001: Plate, sheet and stripTC AECMAEN 4700-002:2010 ( Ed. 1 )Aerospace series Steel and heat resisting alloys - Wrought products- Technical specification Part 002: Bar and sectionTC AECMAEN 4700-003:2010 ( Ed. 1 )Aerospace series Steel and heat resisting alloys - Wrought products- Technical specification Part 003: TubeTC AECMAEN 4700-005:2010 ( Ed. 1 )Aerospace series Steel and heat resisting alloys - Wrought products- Technical specification Part 005: Forging stockTC AECMAEN 4700-006:2010 ( Ed. 1 )Aerospace series Steel and heat resisting alloys - Wrought products- Technical specification Part 006: Preproduction and productionforgingsTC AECMAEN 2434-001:2010 ( Ed. 1 )Aerospace series Paints and varnishes - Two component cold curingpolyurethane finish Part 001: Basic requirementsTC AECMAEN 2434-002:2010 ( Ed. 1 )Aerospace series Paints and varnishes - Two component cold curingpolyurethane finish Part 002: High chemical resistanceTC AECMAEN 2434-003:2010 ( Ed. 1 )Aerospace series Paints and varnishes - Two component cold curingpolyurethane finish Part 003: Flexible and high fluid resistance forinteriorTC AECMAEN 2434-004:2010 ( Ed. 1 )Aerospace series Paints and varnishes - Two component cold curingpolyurethane finish Part 004: High flexibilityTC AECMAEN 3475-100:2010 ( Ed. 2 )Aerospace series Cables, electrical, aircraft use - Test methods Part100: GeneralTC AECMAEN 4136:2009 /AC :2010 ( Ed. 1 )Lista mensal ▪ documentos normativos imp DNOR-01-06 15 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização2.2 CENELECNormas Europeias aprovadas na área electrotécnica pelo Comité Europeu de NormalizaçãoElectrotécnica (CENELEC)Para cada referência, menciona-se o Comité Técnico, a designação codificada e o título.SC 9XACLC/TS 50238-3:2010 /CORRIGENDUM Sep:2010 ( Ed. 1 )Railway applications - Compatibility between rolling stock and traindetection systems Part 3: Compatibility with axle countersSC 9XAEN 50159:2010 ( Ed. 1 )Railway applications - Communication, signalling and processingsystems - Safety-related communication in transmission systemsSC 46XAEN 61935-2:2010 ( Ed. 3 )Specification for the testing of balanced and coaxial informationtechnology cabling Part 2: Cords as epecified in ISO/IEC 11801 andrelated standards(IEC 61935-2:2010)SR 15EN 60684-3-280:2010 ( Ed. 1 )Flexible insulating sleeving Part 3: Specification for individualtypes of sleeving Sheet 280: Heat-shrinkable, polyolefin sleeving,anti-tracking(IEC 60684-3-280:2010)SR 15EN 60684-3-281:2010 ( Ed. 1 )Flexible insulating sleeving Part 3: Specifications for individualtypes of sleeving Sheet 281: Heat-shrinkable, polyolefin sleeving,semiconductive(IEC 60684-3-281:2010)SR 15EN 60684-3-282:2010 ( Ed. 1 )Flexible insulating sleeving Part 3: Specifications for individualtypes of sleeving Sheet 282: Heat-shrinkable, polyolefin sleeving-Stress control(IEC 60684-3-282:2010)SR 15EN 62329-3-101:2010 ( Ed. 1.0 )Heat-shrinkable moulded shapes Part 3: Specification requirementsfor shape dimensions, material requirements and compatibilityperformance Sheet 101: Heat-shinkable moulded shapes, polyolefin,semi-rigid, limited fire hazard, material requirements and systemperformance(IEC 62329-3-101:2010)SR 15EN 62329-3-102:2010 ( Ed. 1 )Heat-shrinkable moulded shapes Part 3: Specification requirementsfor shape dimensions, material requirements and compatibilityperformance Sheet 102: Heat-shinkable elastomeric moulded shapes,semi-rigid, material requirements and system performance(IEC 62329-3-102:2010)SR 25EN 60027-7:2010 ( Ed. 1 )Letter symbols to be used in electrical technology Part 7: Powergeneration, transmission and distribution(IEC 60027-7:2010)SR 32BHD 60269-2:2010 ( Ed. 3 )Low-voltage fuses Part 2: Supplementary requirements for fuses foruse by authorized persons (fuses mainly for industrial application)- Examples of standardized systems of fuses A to J(IEC 60269-2:2010, modif)SR 32BHD 60269-3:2010 ( Ed. 2 )Low-voltage fuses Part 3: Supplementary requirements for fuses foruse by unskilled persons (fuses mainly for household and similarapplications) - Examples of standardized systems of fuses A to F(IEC 60269-3:2010, modif)SR 47EN 60749-19:2003 /A 1:2010 ( Ed. 1 )Semiconductor devices - Mechanical and climatic test methods Part19: Die shear strength(IEC 60749-19:2003/A1:2010)SR 47EN 60749-32:2003 /A 1:2010 ( Ed. 1 )Semiconductor devices - Mechanical and climatic test methods Part32: Flammability of plastic-encapsulated devices (externallyinduced)(IEC 60749-32:2002/A1:2010)SR 48BEN 60512-8-1:2010 ( Ed. 1 )Connectors for electronic equipment - Tests and measurements Part8-1: Static load tests (fixed connectors) - Test 8a: Static load,transverse(IEC 60512-8-1:2010)SR 48BEN 60512-17-1:2010 ( Ed. 1 )Connectors for electronic equipment - Tests and measurements Part17-1: Cable clamping tests - Test 17a: Cable clamp robustness(IEC 60512-17-1:2010)SR 48BEN 60512-17-3:2010 ( Ed. 1 )Connectors for electronic equipment -Tests and measurements Part17-3: Cable clamping tests - Test 17c: Cable clamp resistance tocable pull (tensile)(IEC 60512-17-3:2010)SR 48BEN 60512-17-4:2010 ( Ed. 1 )Connectors for electronic equipment - Tests and measurements Part17-4: Cable clamping tests - Test 17d: Cable clamp resistance tocable torsion(IEC 60512-17-4:2010)SR 48BEN 60512-23-2:2010 ( Ed. 1 )Connectors for electronic equipment - Tests and measurements Part23-2: Screening and filtering tests - Test 23b: Suppressioncharacteristics of integral filters(IEC 60512-23-2:2010)Lista mensal ▪ documentos normativos imp DNOR-01-06 16 14 Outubro 2010

DOCUMENTOSnormativosSR 48BEN 60603-7-7:2010 ( Ed. 3 )Connectors for electronic equipment Part 7-7: Detail specificationfor 8-way, shielded, free and fixed connectors for datatransmission with frequencies up to 600 MHz(IEC 60603-7-7:2010)SR 65BEN 60546-2:2010 ( Ed. 2 )Controllers with analogue signals for use in industrial-processcontrol systems Part 2: Guidance for inspection and routine testing(IEC 60546-2:2010)SR 65AEN 61512-4:2010 ( Ed. 1 )Batch control Part 4: Batch production records(IEC 61512-4:2009)SR 89EN 60695-6-1:2005 /A 1:2010 ( Ed. 1 )Fire hazard testing Part 6-1:Smoke obscuration - General guidance(IEC 60695-6-1:2005/A1:2010)SR 91EN 61190-1-3:2007 /A 1:2010 ( Ed. 1 )Attachment materials for electronic assembly Part 1-3: Requirementsfor electronic grade solder alloys and fluxed and non-fluxed solidsolders for electronic soldering applications(IEC 61190-1-3:2007/A1:2010)TC 17ACEN 62271-101:2006 /A 1:2010 ( Ed. 1 )High-voltage switchgear and controlgear Part 101: Synthetic testing(IEC 62271-101:2006/A1:2010)TC 22XEN 61975:2010 ( Ed. 1 )High-voltage direct current (HVDC) installations - System tests(IEC 61975:2010)TC 23EHD 639-S1:2002 /A 2:2010 ( Ed. 1 )Electrical accessories - Portable residual current devices withoutintegral overcurrent protection for household and similar use(PRCDs)TC 34ZEN 60598-2-20:2010 /CORRIGENDUM Sep:2010 ( Ed. 3 )Luminaires Part 2-20: Particular requirements - Lighting chains(IEC 60598-2-20:2010)TC 40XBEN 60539-2:2004 /A 1:2010 ( Ed. 1 )Directly heated negative temperature coefficient thermistors Part 2:Sectional specification - Surface mount negative temperaturecoefficient thermistors(IEC 60539-2:2003/A1:2010)TC 40XAEN 62490-1:2010 ( Ed. 1 )ESL measuring method Part 1: Capacitors with lead terminal for usein electronic equipment(IEC 62490-1:2010)TC 40XAEN 62490-2:2010 ( Ed. 1 )ESL measuring method Part 2: Surface mount capacitors for use inelectronic equipment(IEC 62490-2:2010)TC 61EN 60335-2-27:2010 /CORRIGENDUM Sep.:2010 ( Ed. 5 )Household and similar electrical appliances - Safety Part 2-27:Particular requirements for appliances for skin exposure toPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãoultraviolet and infrared radiation(IEC 60335-2-27:2002 + A1:2004 + A2:2004, modif)TC 61EN 60335-2-90:2006 /A 1:2010 ( Ed. 3 )Household and similar electrical appliances - Safety Part 2-90:Particular requirements for commercial microwave ovens(IEC 60335-2-90:2006/A1:2010)\nTC 62EN 80601-2-30:2010 ( Ed. 1 )Medical electrical equipment Part 2-30: Particular requirementsfor basic safety and essential performance of automatednon-invasive sphygmomanometers(IEC 80601-2-30:2009 + corrigendum Jan. 2010)\nTC 64HD 60364-7-702:2010 ( Ed. 1 )Low-voltage electrical installations Part 7-702: Requirements forspecial installations or locations - Swimming pools and fountains(IEC 60364-7-702:2010, modif)\nTC 116EN 60745-2-17:2010 ( Ed. 2 )Hand-held motor-operated electric tools - Safety Part 2-17:Particular requirements for routers and trimmers(IEC 60745-2-17:2010, modif)\nTC 210EN 55020:2007 /I S2:2010 ( Ed. 4 )Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement -Interpretation of Clause 1.7Lista mensal ▪ documentos normativos imp DNOR-01-06 17 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização2.3 CEN/CENELECNormas Europeias aprovadas pelo Comité Europeu de Normalização (CEN) / Comité Europeu deNormalização Electrotécnica (CENELEC)Para cada referência, menciona-se a designação codificada e o título.LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 18 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização2.4 ETSINormas Europeias aprovadas e publicadas no sector das Telecomunicações pelo Instituto Europeude Normalização para as Telecomunicações (ETSI)Para cada referência, menciona-se a designação codificada e o título.TC ETSIEN 301025-2:2010 ( V1.4.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);VHF radiotelephone equipment for general communications andassociated equipment for Class "D" Digital Selective Calling (DSC)Part 2: Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE DirectiveTC ETSIEN 301025-3:2010 ( V1.4.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);VHF radiotelephone equipment for general communications andassociated equipment for Class "D" Digital Selective Calling (DSC)Part 3: Harmonized EN covering the essential requirements ofarticle 3.3(e) of the R&TTE DirectiveTC ETSIEN 301033:2010 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Technical characteristics and methods of measurement forshipborne watchkeeping receivers for reception of DigitalSelective Calling (DSC) in the maritime MF, MF/HF and VHFbandsTC ETSIEN 301925:2010 ( V1.3.1 )Electromagnetic compatibility and Radio spectrum Matters (ERM);Radiotelephone transmitters and receivers for the maritime mobileservice operating in VHF bands; Technical characteristics andmethods of measurement\nLista mensal ▪ documentos normativos imp DNOR-01-06 19 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização3. Normas Internacionais publicadasNormas Internacionais aprovadas e publicadas pela Comissão Electrotécnica Internacional (IEC) epela Organização Internacional de Normalização (ISO)Para cada referência, menciona-se o Comité Técnico, a designação codificada, a data e o título.IECTC 23FIEC 61210:2010 ( Ed 2.0 )Connecting devices - Flat quick-connect terminations for electricalcopper conductors - Safety requirementsTC 23AIEC 62444:2010 ( Ed 1.0 )Cable glands for electrical installationsTC 32CIEC 60127-2:2003 ( Ed 2.0 ) - CONSOLIDADAMiniature fuses Part 2: Cartridge fuse-linksTC 65BIEC 60546-2:2010 ( Ed 2.0 )Controllers with analogue signals for use in industrial-processcontrol systems Part 2: Guidance for inspection and routine testingTC 65CIEC 61158-3-21:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part3-21: Data-link layer service definition - Type 21 elementsTC 65CIEC 61158-3-22:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part3-22: Data-link layer service definition - Type 22 elementsTC 65CIEC 61158-4-21:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part4-21: Data-link layer protocol specification - Type 21 elementsTC 65CIEC 61158-4-22:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part4-22: Data-link layer protocol specification - Type 22 elementsTC 65CIEC 61158-5-21:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part5-21: Application layer service definition - Type 21 elementsTC 65CIEC 61158-5-22:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part5-22: Application layer service definition - Type 22 elementsTC 65CIEC 61158-6-21:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part6-21: Application layer protocol specification - Type 21 elementspower electronics Part 1: Paper/plastic film capacitorsTC 10IEC 61099:2010 ( Ed 2.0 )Insulating liquids - Specifications for unused synthetic organic estersfor electrical purposesTC 15IEC 60763-1:2010 ( Ed 2.0 )Laminated pressboard for electrical purposes Part 1: Definitions,classification and general requirementsTC 15IEC 60763-3-1:2010 ( Ed 2.0 )Laminated pressboard for electrical purposes Part 3:Specifications for individual materials Sheet 1: Requirements forlaminated precompressed pressboard, Types LB3.1A.1 andLB3.1A.2TC 16IEC 60445:2010 ( Ed 5.0 )Basic and safety principles for man-machine interface, marking andidentification - Identification of equipment terminals, conductorterminations and conductorsTC 21IEC 62485-3:2010 ( Ed 1.0 )Safety requirements for secondary batteries and battery installationsPart 3: Traction batteriesTC 31IEC 60079-29-4:2009 /CORRIGENDUM Aug:2010 ( Ed 1.0Explosive atmospheres Part 29-4: Gas detectors - Performancerequirements of open path detectors for flammable gasesTC 36IEC/TR 62662:2010 ( Ed 1.0 )Guidance for production, testing and diagnostics of polymerinsulators with respect to brittle fracture of core materialsTC 40IEC 60539-2:2003 /A 1:2010 ( Ed 1.0 )Directly heated negative temperature coefficient thermistors Part 2:Sectional specification - Surface mount negative temperaturecoefficient thermistorsTC 40IEC 62490-1:2010 ( Ed 1.0 )ESL measuring method Part 1: Capacitors with lead terminal for usein electronic equipmentTC 40IEC 62490-2:2010 ( Ed 1.0 )ESL measuring method Part 2: Surface mount capacitors for use inelectronic equipmentTC 65CIEC 61158-6-22:2010 ( Ed 1.0 )Industrial communication networks - Fieldbus specifications Part6-22: Application layer protocol specification - Type 22 elementsTC 9IEC 61881-1:2010 ( Ed 1.0 )Railway applications - Rolling stock equipment - Capacitors forTC 46IEC 61935-2:2010 ( Ed 3.0 )Specification for the testing of balanced and coaxial informationtechnology cabling Part 2: Cords as epecified in ISO/IEC 11801 andrelated standardsLista mensal ▪ documentos normativos imp DNOR-01-06 20 14 Outubro 2010

DOCUMENTOSnormativosPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 47IEC 60749-19:2003 /A 1:2010 ( Ed 1.0 )Semiconductor devices - Mechanical and climatic test methods Part19: Die shear strengthTC 47IEC 60749-32:2002 /A 1:2010 ( Ed 1.0 )Semiconductor devices - Mechanical and climatic test methods Part32: Flammability of plastic-encapsulated devices (externallyinduced)TC 55IEC 60317-57:2010 ( Ed 1.0 )Specifications for particular types of winding wires Part 57:Polyamide-imide enameled round copper wire, class 220TC 55IEC 60317-58:2010 ( Ed 1.0 )Specifications for particular types of winding wires Part 58:Polyamide-imide enameled rectangular copper wire, class 220TC 64IEC 60364-7-702:2010 ( Ed 3.0 )Low-voltage electrical installations Part 7-702: Requirements forspecial installations or locations - Swimming pools and fountainsTC 68IEC/TR 62581:2010 ( Ed 1.0 )Electrical steel - Methods of measurement of the magnetostrictioncharacteristics by means of single sheet and Epstein test specimensTC 96IEC 61558-2-23:2010 ( Ed 2.0 )Safety of transformers, reactors, power supply units andcombinations thereof Part 2-23: Particular requirements and tests fortransformers and power supply units for construction sitesTC 96IEC 62041:2010 ( Ed 2.0 )Safety of transformers, reactors, power supply units andcombinations thereof - EMC requirementsTC 99IEC 61936-1:2010 ( Ed 2.0 )Power installations exceeding 1 kV a.c Part 1: Common rulesTC 109IEC 60664-3:2003 ( Ed 2.0 ) - CONSOLIDADAInsulation coordination for equipment within low-voltage systemsPart 3: Use of coating, potting or moulding for protection againstpollutionLista mensal ▪ documentos normativos imp DNOR-01-06 21 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoISOTC 34ISO 13720:2010 ( Ed 2 )Meat and meat products Enumeration of presumptive Pseudomonasspp.TC 43ISO 10140-1:2010 ( Ed 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 1: Application rules for specific productsTC 43ISO 10140-2:2010 ( Ed 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 2: Measurement of airborne sound insulationTC 43ISO 10140-3:2010 ( Ed 1 )Acoustics Laboratory measurement of sound insulation ofbuilding elements Part 3: Measurement of impact sound insulationTC 43ISO 10140-4:2010 ( Ed 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 4: Measurement procedures and requirementsTC 43ISO 10140-5:2010 ( Ed 1 )Acoustics Laboratory measurement of sound insulation of buildingelements Part 5: Requirements for test facilities and equipmentTC 67ISO 21457:2010 ( Ed 1 )Petroleum, petrochemical and natural gas industries Materialsselection and corrosion control for oil and gas production systemsTC 79ISO 2128:2010 ( Ed 1 )Anodizing of aluminium and its alloys Determination of thicknessof anodic oxidation coatings Non-destructive measurement bysplit-beam microscopeTC 79ISO 3211:2010 ( Ed 3 )Anodizing of aluminium and its alloys Assessment of resistance ofanodic oxidation coatings to cracking by deformationTC 79ISO 7759:2010 ( Ed 2 )Anodizing of aluminium and its alloys Measurement of reflectancecharacteristics of aluminium surfaces using a goniophotometer oran abridged goniophotometerTC 106ISO 11609:2010 ( Ed 2 )Dentistry Dentifrices Requirements, test methods and markingLista mensal ▪ documentos normativos imp DNOR-01-06 22 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização4. Projectos de normas portuguesasOs projectos de normas estão organizadas por Grupos classificativos, indicando-se a referência eo respectivo título.4.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a correspondênciaeuropeia ou internacional, quando exista, e a data limite para a apresentação de comentários.E100 / CTE 1prNP 2626-141:2010Preço: 0,00 EURVocabulário Electrotécnico Internacional Capítulo 141:Sistemas e circuitos polifásicosData de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16E100 / CTE 1prNP 2626-436:2010Preço: 0,00 EURVocabulário Electrotécnico Internacional Capítulo 436:Condensadores de potênciaData de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16C1530 / CT 153prNP 4501:2010Preço: 0,00 EURBetume borracha Requisitos para betumes com borrachareciclada de pneus usadosData de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16C1660 / CT 166prNP 4500:2010Preço: 0,00 EURPiscinas e outros planos de água: vedações e protecção dosacessos Requisitos de segurança e métodos de ensaioData de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16E100 / CTE 1prNP 2626-541:2010Preço: 0,00 EURVocabulário Electrotécnico Internacional Capítulo 541:Circuitos impressosData de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16C160 / CT 16prNP 4502:2010Rolhas de cortiçaDeterminação de resíduos de peróxidosMétodo expeditoData de Início do Inquerito: 2010-10-15Data de Fim do Inquerito: 2010-11-15Preço:0,00 EURC350 / CT 35prNP 4497:2010Preço: 0,00 EURCarnes e produtos cárneos Salsicha tipo alemã Definição ecaracterísticasData de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16\nC350 / CT 35prNP 4498-1:2010Preço: 0,00 EURCarnes e produtos cárneos Determinação do teor de sulfitosParte 1: Método enzimático (método de referência)Data de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16C350 / CT 35prNP 4498-2:2010Preço: 0,00 EURCarnes e produtos cárneos Determinação do teor de sulfitosParte 2: Método de Monier-Williams optimizado (métodocorrente)Data de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16C350 / CT 35prNP 4499:2010Preço: 0,00 EURCarnes e produtos cárneos Determinação do teor em açúcarestotais, redutores e lactose Método Luff-Schoorl (método dereferência)Data de Início do Inquerito: 2010-09-16Data de Fim do Inquerito: 2010-10-16Lista mensal ▪ documentos normativos imp DNOR-01-06 23 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização4.2 Projectos anuladosPara cada referência menciona-se a designação, a correspondência europeia e/ouinternacional, bem como o documento que o substitui, quando exista.LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 24 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização5. Projectos de normas e propostas de estudo de novas normas do ComitéEuropeu de Normalização(CEN e do Comité Europeu para a Normalizaçãodo Ferro e do Aço (ECISS)Os projectos de normas e as propostas de estudo de novas normas estão organizadas por"Comités" Técnicos do CEN e do ECISS.5.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.EN 617:2001 /prA 1:2010Continuous handling equipment and systems Safety andEMC requirements for the equipment for the storage ofbulk materials in silos, bunkers, bins and hoppersData Limite: 2010-10-08EN 618:2002 /prA 1:2010Continuous handling equipment and systems Safety andEMC requirements for equipment for mechanical handlingof bulk materials except fixed belt conveyorsData Limite: 2010-10-08EN 620:2002 /prA 1:2010Continuous handling equipment and systems Safety andEMC requirements for fixed belt conveyors for bulkmaterialsData Limite: 2010-10-08EN 741:2000 /prA 1:2010Continuous handling equipment and systems Safetyrequirements for systems and their components forpneumatic handling of bulk materialsData Limite: 2010-10-15prEN 13012:2010Petrol filling stations Construction and performance ofautomatic nozzles for use on fuel dispensersData Limite: 2010-11-17prEN 13160-1:2010Leak detection systems Part 1: General PrinciplesData Limite: 2010-12-01prEN 13160-3:2010Leak detection systems Part 3: Liquid systems for tanksData Limite: 2010-12-01prEN 13352:2010Specification for the performance of automatic tankcontents gaugesData Limite: 2010-12-01prEN 13617-1:2010Petrol filling stations Part 1: Safety requirements forconstruction and performance of metering pumps,dispensers and remote pumping unitsData Limite: 2010-11-17prEN 13617-2:2010Petrol filling stations Part 2: Safety requirements forconstruction and performance of safe breaks for use onmetering pumps and dispensersData Limite: 2010-11-17construction and performance of shear valvesData Limite: 2010-11-17prEN 13617-4:2010Petrol filling stations Part 4: Safety requirements forconstruction and performance of swivels for use onmetering pumps and dispensersData Limite: 2010-11-17prEN 16156:2010Cigarettes Assessment of the ignition propensity SafetyrequirementData Limite: 2010-10-15prEN ISO 14005:2010Environmental management systems Guidelines for thephased implementation of an environmental managementsystem, including the use of environmental performanceevaluation (ISO/FDIS 14005:2010)Data Limite: 2010-10-26prEN ISO 24443:2010Determination of sunscreen UVA photoprotection invitro(ISO/DIS 24443:2010)Data Limite: 2010-12-22prEN ISO 29621:2010Cosmetics Microbiology Guidelines for the riskassessment and identification of microbiologicallylow-risk products(ISO 29621:2010)Data Limite: 2010-11-19prEN ISO 80369-1:2010Small bore connectors for liquids and gases in healthcareapplications Part 1: General requirements(ISO/FDIS 80369-1:2010)Data Limite: 2010-11-19TC 10prCEN/TS 81-11:2010Safety rules for the construction and installation of liftsBasics and interpretations Part 11: Interpretationsrelated to EN 81 family of standardsData Limite: 2010-12-02TC 10prEN 81-22:2010Safety rules for the construction and installation of liftsLifts for transport of persons and goods Part 22: Electriclifts with inclined pathData Limite: 2010-11-10prEN 13617-3:2010Petrol filling stations Part 3: Safety requirements forLista mensal ▪ documentos normativos imp DNOR-01-06 25 14 Outubro 2010

DOCUMENTOSnormativosTC 12prCEN ISO/TR 10400:2010Petroleum and natural gas industries Equations andcalculations for the properties of casing, tubing, drillpipe and line pipe used as casing or tubing (ISO/DTR10400:2010)Data Limite: 2010-11-26TC 12prCEN ISO/TR 13881:2010Petroleum and natural gas industries Classification andconformity assessment of products, processes andservices(ISO/DTR 13881:2010)Data Limite: 2010-11-26TC 12prCEN ISO/TS 24817:2010Petroleum, petrochemical and natural gas industriesComposite repairs for pipework Qualification and design,installation, testing and inspection(ISO/DTS 24817:2010)Data Limite: 2010-11-26TC 12prCEN ISO/TS 29001:2010Petroleum, petrochemical and natural gas industriesSector-specific quality management systemsRequirements for product and service supplyorganizations(ISO/DTS 29001:2010)Data Limite: 2010-11-26TC 12prEN ISO 11960:2010Petroleum and natural gas industries Steel pipes for useas casing or tubing for wells(ISO/FDIS 11960:2010)Data Limite: 2010-11-16TC 12prEN 12211:2010Petroleum, petrochemical and natural gas industriesSpiral plate heat exchangers(ISO/DIS 12211:2010)Data Limite: 2010-12-08TC 12prEN ISO 13085:2010Petroleum and natural gas industries Aluminium alloy pipefor use as tubing for wells(ISO/DIS 13085:2010)Data Limite: 2011-03-01TC 12EN ISO 13500:2008 /prA 1:2010Petroleum and natural gas industries Drilling fluidmaterials Specifications and tests - Amendment 1: Barite4,1(ISO 13500:2008/FDAM 1:2010)Data Limite: 2010-10-12TC 12prEN ISO 13501:2010Petroleum and natural gas industries Drilling fluidsProcessing systems evaluation(ISO/DIS 13501:2010)Data Limite: 2010-10-06TC 12prEN ISO 13628-4:2010Petroleum and natural gas industries Design andoperation of subsea production systems Part 4: Subseawellhead and tree equipmentPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização(ISO/FDIS 13628-4:2010)Data Limite: 2010-11-16TC 12prEN ISO 13679:2010Petroleum and natural gas industries Procedures fortesting casing and tubing connections(ISO/DIS 13679:2010)Data Limite: 2010-11-12TC 12prEN ISO 19901-3:2010Petroleum and natural gas industries Specificrequirements for offshore structures Part 3: Topsidesstructure(ISO/FDIS 19901-3:2010)Data Limite: 2010-10-19TC 12prEN ISO 19906:2010Petroleum and natural gas industries Arctic offshorestructures(ISO/FDIS 19906:2010)Data Limite: 2010-11-16TC 12prEN ISO 20312:2010Petroleum and natural gas industries Design andoperating limits of drill strings with aluminium alloycomponents(ISO/DIS 20312:2010)Data Limite: 2010-11-03TC 12prEN ISO 23936-2:2010Petroleum, petrochemical and natural gas industriesNon-metallic materials in contact with media related tooil and gas production Part 2: Elastomers(ISO/DIS 23936-2:2010)Data Limite: 2010-10-20TC 12prEN ISO 27627:2010Petroleum and natural gas industries Aluminium alloydrill pipe thread connection gauging(ISO/DIS 27627:2010)Data Limite: 2011-03-01TC 19prEN 15376:2010Automotive fuels Ethanol as a blending component forpetrol Requirements and test methodsData Limite: 2010-11-23TC 19prEN 16135:2010Automotive fuels Determination of manganese contentin unleaded petrol Flame atomic absorptionspectrometric method (AAS)Data Limite: 2010-12-21TC 19prEN 16136:2010Automotive fuels Determination of manganese content inunleaded petrol Inductively coupled plasma opticalemission spectrometry (ICP OES) methodData Limite: 2010-12-21TC 19prEN 16143:2010Petroleum products Determination of content ofBenzo(a)pyrene (BaP) and selected polycyclic aromatichydrocarbons (PAH) in extender oils Procedure usingdouble LC cleaning and GC/MS analysisLista mensal ▪ documentos normativos imp DNOR-01-06 26 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2011-01-05TC 19prEN 16144:2010Liquid petroleum products Determination of ignitiondelay and derived cetane number (DCN) of middledistillate fuels Fixed range injection period, constantvolume combustion chamber methodData Limite: 2011-01-05TC 19prEN ISO 3405:2010Petroleum products Determination of distillationcharacteristics at atmospheric pressure(ISO/FDIS 3405:2010)Data Limite: 2010-11-30TC 19prEN ISO 4404-2:2010Petroleum and related products Determination of thecorrosion resistance of fire-resistant hydraulic fluidsPart 2: Non-aqueous fluids(ISO/FDIS 4404-2:2010)Data Limite: 2010-11-12TC 19prEN ISO 13032:2010Petroleum products Determination of low sulfur contentof automotive fuels Energy-dispersive X-rayfluorescence spectrometry(ISO/DIS 13032:2010)Data Limite: 2010-10-20TC 19prEN ISO 16591:2010Petroleum products Determination of sulfur contentOxidative microcoulometry method(ISO/FDIS 16591:2010)Data Limite: 2010-11-09TC 19prEN ISO 20783-1:2010Petroleum and related products Determination of emulsionstability of fire-resistant fluids Part 1: Fluids incategory HFAE(ISO/FDIS 20783-1:2010)Data Limite: 2010-12-09TC 19prEN ISO 20843:2010Petroleum and related products Determination of pH offire-resistant fluids within categories HFAE, HFAS andHFC(ISO/FDIS 20843:2010)Data Limite: 2010-12-02TC 23prEN ISO 11114-3:2010Transportable gas cylinders Compatibility of cylinder andvalve materials with gas contents Part 3: Autogenousignition test for non-metallic materials in oxygenatmosphere(ISO/FDIS 11114-3:2010)Data Limite: 2010-11-16TC 23prEN ISO 22434:2010Transportable gas cylinders Inspection and maintenanceof cylinder valves(ISO 22434:2006)Data Limite: 2010-12-30Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 33prEN 13126-1:2010Building hardware Hardware for windows and doorheight windows - Requirements and test methods Part 1:Requirements common to all types of hardwareData Limite: 2010-11-03TC 38prEN 16114:2010Management consultancy servicesData Limite: 2010-10-27TC 51prCEN ISO/TS 16142:2010Cement A study of the characteristic leaching behaviourof hardened concrete for use in the natural nvironmentData Limite: 2010-11-19TC 51prEN 196-5:2010Methods of testing cement Part 5: Pozzolanicity test forpozzolanic cementData Limite: 2011-01-19TC 51prEN 413-1:2010Masonry cement Part 1: Composition, specifications andconformity criteriaData Limite: 2011-02-09TC 52EN 71-1:2005 /prA 10:2010Safety of toys Part 1: Mechanical and physical propertiesData Limite: 2010-10-12TC 52EN 71-1:2005 /prA 11:2010Safety of toys Part 1: Mechanical and physical propertiesData Limite: 2010-10-12TC 52EN 71-1:2005 /prA 12:2010Safety of toys Part 1: Mechanical and physical propertiesData Limite: 2010-10-12TC 52EN 71-1:2005 /prA 14:2010Safety of toys Part 1: Mechanical and physical propertiesData Limite: 2010-11-12TC 52prEN 71-1:2010Safety of toys Part 1: Mechanical and physical propertiesData Limite: 2010-10-06TC 52prEN 71-2:2010Safety of toys Part 2: FlammabilityData Limite: 2010-11-24TC 52prEN 71-8:2010Safety of toys Part 8: Swings, slides and similar activitytoys for indoor and outdoor family domestic useData Limite: 2010-12-15TC 54prEN 764-2:2010Pressure equipment Part 2: Quantities, symbols and unitsData Limite: 2010-12-22TC 54EN 13445-3:2009 /prA 1:2010Unfired pressure vessels Part 3: DesignLista mensal ▪ documentos normativos imp DNOR-01-06 27 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2011-01-19TC 54EN 14359:2006 /prA 1:2010Gas-loaded accumulators for fluid power applicationsData Limite: 2010-10-15TC 54prEN 15776:2010Unfired pressure vessels Requirements for the design andfabrication of pressure vessels and pressure partsconstructed from cast iron with an elongation afterfracture equal or less than 15 %Data Limite: 2010-11-30TC 55prEN ISO 1942:2010Dentistry Vocabulary(ISO 1942:2009, Corrected version 2010-03-01)Data Limite: 2010-10-08TC 55EN ISO 6360-2:2004 /prA 1:2010Dentistry Number coding system for rotary instrumentsPart 2: Shapes - Amendment 1(ISO 6360-2:2004/DAM 1:2010)Data Limite: 2010-11-10TC 55prEN ISO 6875:2010Dental patient chair(ISO/DIS 6875:2010)Data Limite: 2010-10-27TC 55prEN ISO 6876:2010Dentistry Root canal sealing materials(ISO/DIS 6876:2010)Data Limite: 2011-01-26TC 55prEN ISO 7494-1:2010Dentistry Dental units Part 1: General requirements andtest methods(ISO/DIS 7494-1:2010)Data Limite: 2010-10-27TC 55prEN ISO 9693-1:2010Dentistry Compatibility testing Part 1: Metal-ceramicsystems(ISO/DIS 9693-1:2010)Data Limite: 2010-12-08TC 55prEN ISO 27020:2010Dentistry Brackets and tubes for use in orthodontics(ISO/FDIS 27020:2010)Data Limite: 2010-11-16TC 55prEN ISO 80601-2-60:2010Medical electrical equipment Part 2-60: Particularrequirements for basic safety and essential performanceof dental equipment (ISO/DIS 80601-2-60 :2010)Data Limite: 2010-10-06TC 57prEN 303-5:2010Central-Heating boilers Part 5: Heating boilers forsolid fuels, hand and automatically stoked, nominalheat output of up to 500 kW - Terminology requirements,testing and markingData Limite: 2011-01-05Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 58prEN 126:2010Multifunctional controls for gas burning appliancesData Limite: 2011-02-23TC 58prEN 161:2010Automatic shut-off valves for gas burners and gasappliancesData Limite: 2011-01-19TC 69EN 593:2009 /prA 1:2010Particleboards and fibreboards Determination ofresistance to axial withdrawal of screwsData Limite: 2011-02-16TC 70prCEN/TR 15642:2010Unified tests procedures for the tests of EN3-7:2004+A1:2007Data Limite: 2010-12-16TC 88prEN 15101-1:2010Thermal insulation products for buildings In-situ formedloose fill cellulose (LFCI) products Part 1: Specificationfor the products before installationData Limite: 2010-11-02TC 88prEN 15101-2:2010Thermal insulation products for buildings In-situ formedloose fill cellulose (LFCI) products Part 2: Specificationfor the installed productsData Limite: 2010-11-02TC 89prEN ISO 12569:2010Thermal insulation in buildings Determination of airchange in buildings Tracer gas dilution methodData Limite: 2010-12-08TC 92EN 14154-1:2005 /prA 2:2010Water meters Part 1: General requirementsData Limite: 2010-12-02TC 109prEN 15502-1:2010Gas-fired heating boilers Part 1: General requirements andtestsData Limite: 2010-12-22TC 109prEN 15502-2-1:2010Gas-fired heating boilers Part 2-1: Specific standardfor type C appliances and type B2, B3 and B5 appliancesof a nominal heat input not exceeding 1 000 kWData Limite: 2010-11-10TC 112prEN 320:2010Particleboards and fibreboards Determination ofresistance to axial withdrawal of screwsData Limite: 2011-02-16TC 112EN 13353:2008 /prA 1:2010Solid wood panels (SWP) RequirementsData Limite: 2011-02-28Lista mensal ▪ documentos normativos imp DNOR-01-06 28 14 Outubro 2010

DOCUMENTOSnormativosTC 112prEN 13986:2010Wood-based panels for use in constructionCharacteristics, evaluation of conformity and markingData Limite: 2010-11-10TC 113prEN 16147:2010Heat pumps with electrically driven compressors Testingand requirements for marking for domestic hot waterunitsData Limite: 2010-11-02TC 114prEN ISO 4413:2010Hydraulic fluid power General rules and safetyrequirements for systems and their components(ISO/FDIS 4413:2010)Data Limite: 2010-10-05TC 114prEN ISO 4414:2010Pneumatic fluid power General rules and safetyrequirements for systems and their components(ISO/FDIS 4414:2010)Data Limite: 2010-10-05TC 114prEN ISO 13849-2:2010Safety of machinery Safety-related parts of controlsystems Part 2: Validation(ISO/DIS 13849-2:2010)Data Limite: 2010-10-27TC 121prEN 15609-5:2010Specification and qualification of welding procedures formetallic materials Welding procedure specification -Part 5: Resistance welding (ISO/DIS 15609-1:2010)Data Limite: 2010-11-03TC 121prEN 3580:2010Welding consumables Covered electrodes for manual metalarc welding of creep-resisting steels Classification(ISO 3580:2010)Data Limite: 2010-12-08TC 121prEN ISO 4063:2010Welding and allied processes Nomenclature of processesand reference numbers(ISO 4063:2009, Corrected version 2010-03-01)Data Limite: 2010-10-22TC 121prEN ISO 4136:2010Destructive tests on welds in metallic materials Transversetensile test(ISO 4136:2001)Data Limite: 2011-01-12TC 121prEN ISO 5178:2010Destructive tests on welds in metallic materialsLongitudinal tensile test on weld metal in fusion weldedjoints(ISO 5178:2001)Data Limite: 2011-01-12TC 121prEN ISO 9015-1:2010Destructive tests on welds in metallic materials Hardnesstesting Part 1: Hardness test on arc welded jointsPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização(ISO 9015-1:2001)Data Limite: 2011-01-12TC 121prEN ISO 9015-2:2010Destructive tests on welds in metallic materials Hardnesstesting Part 2: Microhardness testing of welded joints(ISO 9015-2:2003)Data Limite: 2011-01-12TC 121prEN ISO 9016:2010Destructive tests on welds in metallic materials Impacttests Test specimen location, notch orientation andexamination(ISO 9016:2001)Data Limite: 2011-01-12TC 121prEN ISO 11666:2010Non-destructive testing of welds Ultrasonic testing ofwelded joints Acceptance levels(ISO/FDIS 11666:2010)Data Limite: 2010-12-16TC 121prEN ISO 13585:2010Brazing Brazer qualification(ISO/DIS 13585:2010)Data Limite: 2010-11-30TC 121prEN ISO 14341:2010Welding consumables Wire electrodes and weld depositsfor gas shielded metal arc welding of non alloy and finegrain steels Classification (ISO 14341:2010)Data Limite: 2010-11-24TC 121prEN ISO 15615:2010Gas welding equipment Acetylene manifold systems forwelding, cutting and allied processes Safety requirementsin high-pressure devices(ISO/DIS 15615:2010)Data Limite: 2011-01-05TC 121prEN ISO 17637:2010Non-destructive testing of welds Visual testing offusion-welded joints(ISO 17637:2003)Data Limite: 2011-01-12TC 121prEN ISO 17640:2010Non-destructive testing of welds Ultrasonic testingTechniques, testing levels, and assessment(ISO/FDIS 17640:2010)Data Limite: 2010-10-26TC 121prEN ISO 17654:2010Destructive tests on welds in metallic materialsResistance welding Pressure test on resistance seamwelds(ISO/DIS 17654:2010)Data Limite: 2010-10-27TC 121prEN ISO 18274:2010Welding consumables Wire and strip electrodes, wires androds for fusion welding of nickel and nickel alloysClassification(ISO/FDIS 18274:2010)Lista mensal ▪ documentos normativos imp DNOR-01-06 29 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-11-16TC 122prEN ISO 9241-129:2010Ergonomics of human-system interaction Part 129:Guidance on software individualization(ISO/FDIS 9241-129:2010)Data Limite: 2010-10-19TC 122prEN ISO 9241-143:2010Ergonomics of human-system interaction Part 143:Form-based dialogues(ISO/DIS 9241-143:2010)Data Limite: 2010-12-15TC 122EN ISO 9241-410:2008 /prA 1:2010Ergonomics of human-system interaction Part 410: Designcriteria for physical input devices(ISO 9241-410:2008/DAM 1:2010)Data Limite: 2011-02-23TC 122prEN ISO 24501:2010Ergonomics Accessible design Sound pressure levels ofauditory signals for consumer products(ISO/FDIS 24501:2010)Data Limite: 2010-11-16TC 122prEN ISO 24502:2010Ergonomics Accessible design Specification ofage-related luminance contrast for coloured light(ISO/FDIS 24502:2010)Data Limite: 2010-11-16TC 123prEN ISO 11252:2010Lasers and laser-related equipment Laser deviceMinimum requirements for documentation(ISO/DIS 11252:2010)Data Limite: 2010-12-29TC 124prEN 1912:2010Structural Timber Strength classes Assignment of visualgrades and speciesData Limite: 2011-01-05TC 124EN 14081-1:2005 /prA 1:2010Timber structures Strength graded structural timber withrectangular cross section Part 1: General requirementsData Limite: 2010-11-19TC 124prEN 14081-3:2010Timber structures Strength graded structural timber withrectangular cross section Part 3: Machine grading;additional requirements for factory production controlData Limite: 2010-11-24TC 125prEN 771-1:2010Specification for masonry units Part 1: Clay masonryunitsData Limite: 2011-02-02TC 125prEN 771-2:2010Specification for masonry units Part 2: Calcium silicatemasonry unitsData Limite: 2011-02-09Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 125prEN 771-3:2010Specification for masonry units Part 3: Aggregateconcrete masonry units (Dense and light weightaggregates)Data Limite: 2011-02-09TC 125prEN 771-4:2010Specification for masonry units Part 4: Autoclavedaerated concrete masonry unitsData Limite: 2010-12-16TC 125prEN 771-5:2010Specification for masonry units Part 5: Manufacturedstone masonry unitsData Limite: 2011-02-16TC 125prEN 771-6:2010Specification for masonry units Part 6: Natural stonemasonry unitsData Limite: 2011-02-02TC 125prEN 772-1:2010Methods of test for masonry units Part 1: Determinationof compressive strengthData Limite: 2010-11-24TC 125prEN 772-11:2010Methods of test for masonry units Part 11: Determinationof water absorption of aggregate concrete, autoclavedaerated concrete, manufactured stone and natural stonemasonry units due to capillary action and the initial rateof water absorption of clay masonry unitsData Limite: 2010-11-24TC 125prEN 772-16:2010Methods of test for masonry units Part 16:Determination of dimensionsData Limite: 2010-11-24TC 125prEN 772-18:2010Methods of test for masonry units Part 18: Determinationof freeze-thaw resistance of calcium silicate masonryunitsData Limite: 2010-11-24TC 125prEN 772-21:2010Methods of test for masonry units Part 21: Determinationof water absorption of clay and calcium silicate masonryunits by cold water absorptionData Limite: 2010-11-24TC 125prEN 1745:2010Masonry and masonry products Methods for determiningthermal propertiesData Limite: 2011-01-05TC 127prEN 1366-10:2010Fire resistance tests for service installations Part 10:Smoke control dampersData Limite: 2011-01-05Lista mensal ▪ documentos normativos imp DNOR-01-06 30 14 Outubro 2010

DOCUMENTOSnormativosTC 127prEN 15080-12:2010Extended application of results from fire resistancetests Part 12: Loadbearing masonry wallsData Limite: 2010-11-10TC 127prEN 15269-10:2010Extended application of test results for fire resistanceand/or smoke control for door, shutter and openablewindow assemblies including their elements of buildinghardware Part 10: Fire resistance of steel rolling shutterassembliesData Limite: 2011-02-09TC 128prEN 16153:2010Light transmitting flat multiwall polycarbonate (PC)sheets for internal and external roofs, walls and ceilingsRequirements and test methodsData Limite: 2011-02-02TC 129prEN 410:2010Glass in building Determination of luminous and solarcharacteristics of glazingData Limite: 2010-12-01TC 129prEN 673:2010Glass in building Determination of thermaltransmittance (U value) Calculation methodData Limite: 2010-12-01TC 129prEN 12758:2010Glass in building Glazing and airborne sound insulationProduct descriptions and determination of propertiesData Limite: 2010-11-10TC 132prEN 12258-1:2010Aluminium and aluminium alloys Terms and definitionsPart 1: General termsData Limite: 2011-01-26TC 133prEN 1172:2010Copper and copper alloys Sheet and strip for buildingpurposesData Limite: 2010-12-08TC 133prEN 12451:2010Copper and copper alloys Seamless, round tubes for heatexchangersData Limite: 2011-01-19TC 133prEN 15022-4:2010Copper and copper alloys Determination of tin contentPart 4: Medium tin content - Flame atomic absorptionspectrometric method (FAAS)Data Limite: 2010-11-03TC 133prEN 16117-1:2010Copper and copper alloys Determination of copper contentPart 1: Electrolytic determination of copper in materialswith copper content less than 99,85 %Data Limite: 2010-11-03Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 134prEN 548:2010Resilient floor coverings Specification for plain anddecorative linoleumData Limite: 2011-01-05TC 134prEN 649:2010Resilient floor coverings Homogenous and heterogenouspolyvinyl chloride floor coverings SpecificationData Limite: 2011-01-05TC 134prEN 650:2010Resilient floor coverings Polyvinyl chloride floorcoverings on jute backing or on polyester felt backing oron polyester felt with polyvinyl chloride backingSpecificationData Limite: 2011-01-12TC 134prEN 651:2010Resilient floor coverings Polyvinyl chloride floorcoverings with foam layer SpecificationData Limite: 2011-01-05TC 134prEN 652:2010Resilient floor coverings Polyvinyl chloride floorcoverings with cork-based backing SpecificationData Limite: 2011-01-05TC 134prEN 653:2010Resilient floor coverings Expanded (cushioned) polyvinylchloride floor coverings SpecificationData Limite: 2011-02-09TC 134prEN 654:2010Resilient floor coverings Semi-flexible polyvinyl chloridetiles SpecificationData Limite: 2011-02-09TC 134prEN 655:2010Resilient floor coverings Tiles of agglomeratedcomposition cork with polyvinyl chloride wear layerSpecificationData Limite: 2011-02-09TC 134prEN 686:2010Resilient floor coverings Specification for plain anddecorative linoleum on a foam backingData Limite: 2011-02-09TC 134prEN 687:2010Resilient floor coverings Specification for plain anddecorative linoleum on a corkment backingData Limite: 2011-02-09TC 134prEN 688:2010Resilient floor coverings Specification for corklinoleumData Limite: 2011-02-09TC 136prEN 12275:2010Mountaineering equipment Connectors Safetyrequirements and test methodsData Limite: 2011-02-23Lista mensal ▪ documentos normativos imp DNOR-01-06 31 14 Outubro 2010

DOCUMENTOSnormativosTC 136prEN 13537:2010Requirements for sleeping bagsData Limite: 2011-02-02TC 136prEN 15151-1:2010Mountaineering equipment Braking devices Part 1:Braking devices with assisted locking, safetyrequirements and test methodsData Limite: 2010-10-06TC 136prEN 15151-2:2010Mountaineering equipment Braking devices Part 2:Manual braking devices, safety requirements and testmethodsData Limite: 2010-10-06TC 137prEN 13205:2010Workplace exposure Assessment of sampler performancefor measurement of airborne particle concentrationsData Limite: 2011-02-16TC 138prEN 13554:2010Non-destructive testing Acoustic emission testingGeneral principlesData Limite: 2010-11-16TC 138prEN 14127:2010Non-destructive testing Ultrasonic thicknessmeasurementData Limite: 2010-11-24TC 138prEN ISO 15549:2010Non-destructive testing Eddy current testing Generalprinciples(ISO 15549:2008)Data Limite: 2010-10-27TC 139prEN 13523-20:2010Coil coated metals Test methods Part 20: Foam adhesionData Limite: 2010-12-22TC 139prEN 16105:2010Paints and varnishes Leaching of substances fromcoatings Laboratory immersion methodData Limite: 2010-10-06TC 139prEN ISO 2431:2010Paints and varnishes Determination of flow time by useof flow cups(ISO/DIS 2431:2010)Data Limite: 2010-11-17TC 139prEN ISO 2812-3:2010Paints and varnishes Determination of resistance toliquids Part 3: Method using an absorbent medium(ISO/DIS 2812-3:2010)Data Limite: 2011-02-09TC 139prEN ISO 9117-4:2010Paints and varnishes Drying tests Part 4: Test using amechanical recorder(ISO/DIS 9117-4:2010)Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2011-02-09TC 139prEN ISO 9117-5:2010Paints and varnishes Drying tests Part 5: ModifiedBandow-Wolff test(ISO/DIS 9117-5:2010)Data Limite: 2011-02-09TC 139prEN ISO 11664-1:2010Colorimetry Part 1: CIE standard colorimetric observers(ISO 11664-1:2007)Data Limite: 2011-02-16TC 139prEN ISO 11664-2:2010Colorimetry Part 2: CIE standard illuminants(ISO 11664-2:2007)Data Limite: 2011-02-16TC 139prEN ISO 11664-4:2010Colorimetry Part 4: CIE 1976 L*a*b* Colour space(ISO 11664-4:2008)Data Limite: 2011-02-16TC 139prEN ISO 11664-5:2010Colorimetry Part 5: CIE 1976 L*u*v* Colour space andu', v' uniform chromaticity scale diagram(ISO 11664-5:2009)Data Limite: 2011-02-16TC 139prEN ISO 19334:2010Binders for paints and varnishes Gum rosinGas-chromatographic analysis(ISO 19334:2010)Data Limite: 2011-02-16TC 139prEN ISO 20566:2010Paints and varnishes Determination of the scratchresistance of a coating system using a laboratory-scalecarwash(ISO/DIS 20566:2010)Data Limite: 2010-12-29TC 140prEN ISO 19001:2010In vitro diagnostic medical devices Information suppliedby the manufacturer with in vitro diagnostic reagentsfor staining in biology (ISO/DIS 19001:2010)Data Limite: 2011-01-05TC 142prEN 691-1:2010Safety of woodworking machines Part 1: CommonrequirementsData Limite: 2010-11-24TC 143EN 12413:2007 /prA 1:2010Safety requirements for bonded abrasive productsData Limite: 2011-02-16TC 144EN 13683:2003 /prA 2:2010Garden equipment Integrally powered shredders/chippersSafetyData Limite: 2010-11-02Lista mensal ▪ documentos normativos imp DNOR-01-06 32 14 Outubro 2010

DOCUMENTOSnormativosTC 144prEN ISO 4254-11:2010Agricultural machinery Safety Part 11: Pick-up balers(ISO/FDIS 4254-11:2010)Data Limite: 2010-11-16TC 147prEN 12999:2010Cranes Loader cranesData Limite: 2010-11-09TC 147prEN 13001-2:2010Crane safety General design Part 2: Load actionsData Limite: 2011-01-26TC 147prEN 14502-1:2010Cranes Equipment for the lifting of persons Part 1:Suspended basketsData Limite: 2011-03-14TC 147prEN 15011:2010Cranes Bridge and gantry cranesData Limite: 2010-11-17TC 151EN 500-4:2006 /prA 2:2010Mobile road construction machinery Safety Part 4:Specific requirements for compaction machinesData Limite: 2010-12-23TC 151prEN 500-4:2010Mobile road construction machinery Safety Part 4:Specific requirements for compaction machinesData Limite: 2010-10-08TC 153EN 12463:2004 /prA 1:2010Food processing machinery Filling machines andauxiliary machines Safety and hygiene requirementsData Limite: 2010-11-17TC 153prA 14655-:2005+A1:2010Food processing machinery Baguette slicers Safety andhygiene requirementsData Limite: 2011-01-06TC 154prEN 1097-1:2010Tests for mechanical and physical properties ofaggregates Main element Part 1: Determination of theresistance to wear (micro-Deval)Data Limite: 2010-11-10TC 154prEN 1097-6:2010Tests for mechanical and physical properties ofaggregates Part 6: Determination of particle density andwater absorptionData Limite: 2010-11-03TC 154prEN 1367-5:2010Tests for thermal and weathering properties of aggregatesPart 5: Determination of resistance to thermal shockData Limite: 2010-11-10TC 154prEN 1744-7:2010Tests for chemical properties of aggregates Part 7:Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoDetermination of loss of ignition of MunicipalIncinerator Bottom Ash (MIBA Aggregate)Data Limite: 2010-11-03TC 155prEN 12201-4:2010Plastics piping systems for water supply, and fordrainage and sewerage under pressure Polyethylene (PE)Part 4: Valves for water supply systemsData Limite: 2010-10-27TC 155prEN ISO 15874-1:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 1: General(ISO/DIS 15874-1:2010)Data Limite: 2010-12-29TC 155prEN ISO 15874-2:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 2: Pipes(ISO/DIS 15874-2:2010)Data Limite: 2010-12-29TC 155prEN ISO 15874-3:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 3: Fittings(ISO/DIS 15874-3:2010)Data Limite: 2010-12-29TC 155prEN ISO 15874-5:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 5: Fitness forpurpose of the system(ISO/DIS 15874-5:2010)Data Limite: 2010-12-29TC 155EN ISO 15877-1:2009 /prA 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)Part 1: General - Amendment 1(ISO 15877-1:2009/FDAM 1:2010)Data Limite: 2010-10-05TC 155EN ISO 15877-2:2009 /prA 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)Part 2: Pipes - Amendment 1(ISO 15877-2:2009/FDAM 1:2010)Data Limite: 2010-10-05TC 155EN ISO 15877-3:2009 /prA 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)Part 3: Fittings - Amendment 1(ISO 15877-3:2009/FDAM 1:2010)Data Limite: 2010-10-05TC 155EN ISO 15877-5:2009 /prA 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)Part 5: Fitness for purpose of the system - Amendment 1(ISO 15877-5:2009/FDAM 1:2010)Data Limite: 2010-10-05Lista mensal ▪ documentos normativos imp DNOR-01-06 33 14 Outubro 2010

DOCUMENTOSnormativosTC 156EN ISO 12499:2008 /prA 1:2010Industrial fans Mechanical safety of fans Guarding(ISO 12499:1999/DAM 1:2010)Data Limite: 2011-01-19TC 158prCEN/TR 16148:2010Head and neck impact, burn and noise injury criteria AGuide for CEN helmet standards committeesData Limite: 2010-11-26TC 158prCEN/TR 16149:2010Guidance Document for drafting CEN/TC 158 StandardsData Limite: 2010-11-26TC 161prEN 13634:2010Protective footwear for motorcycle riders Requirementsand test methodsData Limite: 2010-10-05TC 161prEN 13832-3:2010Footwear protecting against chemicals Part 3:Requirements for footwear highly resistant to chemicalsunder laboratory conditionsData Limite: 2010-10-06TC 162prEN ISO 15027-1:2010Immersion suits Part 1: Constant wear suits,requirements including safety(ISO/DIS 15027-1:2010)Data Limite: 2010-11-03TC 162prEN ISO 15027-2:2010Immersion suits Part 2: Abandonment suits, requirementsincluding safety(ISO/DIS 15027-2:2010)Data Limite: 2010-11-03TC 162prEN ISO 15027-3:2010Immersion suits Part 3: Test methods(ISO/DIS 15027-3:2010)Data Limite: 2010-11-03TC 162prEN ISO 20471:2010High-visibility warning clothing for professional useTest methods and requirements(ISO/DIS 20471:2010)Data Limite: 2011-01-12TC 164EN 1113:2008 /prA 1:2010Sanitary tapware Shower hoses for sanitary tapware forwater supply systems of type 1 and type 2 Generaltechnical specificationData Limite: 2010-12-08TC 164prEN 15145:2010Sanitary tapware Extractable outlets for sink and basinmixers General technical specificationData Limite: 2011-01-05TC 164prEN 16146:2010Sanitary tapware Extractable shower hoses for sanitarytapware for supply systems type 1 and type 2 GeneralPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãotechnical specificationData Limite: 2011-01-05TC 165prEN 295-1:2010Vitrified clay pipe systems for drains and sewers Part 1:Requirements for pipes, fittings and jointsData Limite: 2010-10-13TC 165prEN 295-2:2010Vitrified clay pipe systems for drains and sewers Part 2:Evaluation of conformity and samplingData Limite: 2010-10-13TC 165prEN 295-3:2010Vitrified clay pipe systems for drains and sewers Part 3:Test methodsData Limite: 2010-10-13TC 165prEN 295-4:2010Vitrified clay pipe systems for drains and sewers Part 4:Requirements for adaptors, connectors and flexiblecouplingsData Limite: 2010-10-13TC 165prEN 295-5:2010Vitrified clay pipe systems for drains and sewers Part 5:Requirements for perforated pipes and fittingsData Limite: 2010-10-13TC 165prEN 295-6:2010Vitrified clay pipes systems for drain and sewers Part6: Requirements for components of manholes andinspection chambersData Limite: 2010-10-13TC 165prEN 295-7:2010Vitrified clay pipe systems for drains and sewers Part 7:Requirements for pipes and joints for pipe jackingData Limite: 2010-10-13TC 166prCEN/TS 16134:2010Chimney terminals General requirements and materialindependent test methodsData Limite: 2010-10-29TC 169prEN 12464-1:2009Light and lighting Lighting of work places Part 1:Indoor work placesData Limite: 2011-02-10TC 170prEN 16128:2010Reference test method for release of nickel from thoseparts of spectacle frames and sunglasses intended to comeinto close and prolonged contact with the skinData Limite: 2010-12-08TC 170prEN ISO 8624:2010Ophthalmic optics Spectacle frames Measuring systemand terminology(ISO/FDIS 8624:2010)Data Limite: 2010-11-30Lista mensal ▪ documentos normativos imp DNOR-01-06 34 14 Outubro 2010

DOCUMENTOSnormativosTC 170prEN ISO 11986:2010Ophthalmic optics Contact lenses and contact lens careproducts Determination of preservative uptake andrelease(ISO/FDIS 11986:2010)Data Limite: 2010-10-05TC 170prEN ISO 12870:2010Ophthalmic optics Spectacle frames Requirements andtest methods(ISO/DIS 12870:2010)Data Limite: 2010-12-29TC 171prEN 834:2010Heat cost allocators for the determination of theconsumption of room heating radiators Appliances withelectrical energy supplyData Limite: 2010-12-08TC 172prEN 534:2010Paper and board Determination of thickness, density andspecific volume(ISO/DIS 534:2010)Data Limite: 2010-11-24TC 172prEN ISO 3035:2010Corrugated fibreboard Determination of flat crushresistance(ISO/DIS 3035:2010)Data Limite: 2010-10-13TC 172prEN ISO 12625-8:2010Tissue paper and tissue products Part 8:Water-absorption time and water-absorption capacity,basketimmersion test method(ISO/FDIS 12625-8:2010)Data Limite: 2010-11-16TC 175prEN 13629:2010Wood flooring Solid individual and pre-assembledhardwood boardsData Limite: 2011-02-16TC 178prEN 1338:2010Concrete paving blocks Requirements and test methodsData Limite: 2010-12-29TC 178prEN 1339:2010Concrete paving flags Requirements and test methodsData Limite: 2010-11-29TC 178prEN 1340:2010Concrete kerb units Requirements and test methodsData Limite: 2010-12-29TC 181prEN 417:2010Non-refillable metallic gas cartridges for liquefiedpetroleum gases, with or without a valve, for use withportable appliances Construction, inspection, testingand markingData Limite: 2011-01-05Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 181prEN 1949:2010Specification for the installation of LPG systems forhabitation purposes in leisure accommodation vehiclesand accommodation purposes in other vehiclesData Limite: 2010-11-30TC 181prEN 16129:2010Pressure regulators, automatic change-over devices,having a maximum regulated pressure of 4 bar, with amaximum capacity of 100kg/h, associated safety devicesand adaptors for butane, propane, and their mixturesData Limite: 2011-02-02TC 182EN 378-1:2008 /prA 1:2010Refrigerating systems and heat pumps Safety andenvironmental requirements Part 1: Basic requirements,definitions, classification and selection criteriaData Limite: 2010-10-12TC 182EN 14276-1:2006 /prA 1:2010Pressure equipment for refrigerating systems and heatpumps Part 1: Vessels - General requirementsData Limite: 2010-11-12TC 182EN 14276-2:2007 /prA 1:2010Pressure equipment for refrigerating systems and heatpumps Part 2: Piping - General requirementsData Limite: 2010-11-12TC 182prEN 14624:2010Performance of portable leak detectors and of roommonitors for halogenated refrigerantsData Limite: 2010-12-08TC 182prEN 16084:2010Refrigerating systems and heat pumps Qualification oftightness of components and jointsData Limite: 2011-01-19TC 185prEN ISO 4014:2010Hexagon head bolts Product grades A and B (ISO/FDIS4014:2010)Data Limite: 2010-12-30TC 185prEN ISO 4016:2010Hexagon head bolts Product grade C(ISO/FDIS 4016:2010)Data Limite: 2010-12-30TC 185prEN ISO 4017:2010Hexagon head screws Product grades A and B(ISO/FDIS 4017:2010)Data Limite: 2010-12-30TC 185prEN ISO 4018:2010Hexagon head screws Product grade C(ISO/FDIS 4018:2010)Data Limite: 2010-12-30TC 185prEN ISO 7048:2010Cross-recessed cheese head screws(ISO/FDIS 7048:2010)Lista mensal ▪ documentos normativos imp DNOR-01-06 35 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-12-30TC 185prEN ISO 8676:2010Hexagon head screws with metric fine pitch threadProduct grades A and B(ISO/FDIS 8676:2010)Data Limite: 2010-12-30TC 185prEN ISO 8765:2010Hexagon head bolts with metric fine pitch threadProduct grades A and B(ISO/FDIS 8765:2010)Data Limite: 2010-12-30TC 185prEN ISO 10510:2010Tapping screw and washer assemblies with plain washers(ISO/FDIS 10510:2010)Data Limite: 2010-12-16TC 185prEN ISO 14579:2010Hexalobular socket head cap screws(ISO/FDIS 14579:2010)Data Limite: 2010-12-30TC 185prEN ISO 14580:2010Hexalobular socket cheese head screws(ISO/FDIS 14580:2010)Data Limite: 2010-12-30TC 185prEN ISO 14583:2010Hexalobular socket pan head screws(ISO/FDIS 14583:2010)Data Limite: 2010-12-30TC 185prEN ISO 14584:2010Hexalobular socket raised countersunk head screws(ISO/FDIS 14584:2010)Data Limite: 2010-12-30TC 185prEN ISO 14585:2010Hexalobular socket pan head tapping screws(ISO/FDIS 14585:2010)Data Limite: 2010-12-16TC 185prEN ISO 14586:2010Hexalobular socket countersunk head tapping screws(ISO/FDIS 14586:2010)Data Limite: 2010-12-16TC 185prEN ISO 14587:2010Hexalobular socket raised countersunk (oval) headtapping screws(ISO/FDIS 14587:2010)Data Limite: 2010-12-16TC 187prEN 15979:2010Testing of ceramic raw and basic materials Directdetermination of mass fractions of impurities in powdersand granules of silicon carbide by OES by DC arcexcitationData Limite: 2010-11-09Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 187prEN 15991:2010Testing of ceramic and basic materials Directdetermination of mass fractions of impurities in powdersand granules of silicon carbide by inductively coupledplasma optical emission spectrometry (ICP OES) withelectrothermal vaporisation (ETV)Data Limite: 2010-11-09TC 187prEN ISO 14719:2010Chemical analysis of refractory material glass andglazes Determination of Fe2+ and Fe3+ by the spectralphotometric method with 1-10 phenantroline (ISO/DIS14719:2010)Data Limite: 2011-01-26TC 190prEN 1370:2010Founding Examination of surface conditionData Limite: 2010-11-03TC 190prEN 1371-1:2010Founding Liquid penetrant inspection Part 1: Sand,gravity die and low pressure die castingsData Limite: 2010-11-17TC 190prEN 12680-3:2010Founding Ultrasonic examination Part 3: Spheroidalgraphite cast iron castingsData Limite: 2010-11-17TC 190prEN 16124:2010Founding Low alloyed ferritic spheroidal graphite castiron for elevated temperature applicationsData Limite: 2010-11-24TC 191prEN 12101-3:2010Smoke and heat control systems Part 3: Specification forpowered smoke and heat control ventilatorsData Limite: 2010-10-20TC 191prEN 12101-7:2010Smoke and heat control systems Part 7: Smoke ductsectionsData Limite: 2011-02-16TC 191prEN 12101-8:2010Smoke and heat control systems Part 8: Smoke controldampersData Limite: 2011-02-16TC 192prEN 14043:2010High rise aerial appliances for fire service useTurntable ladders with sequential movements Safety andperformance requirements and test methodsData Limite: 2011-02-23TC 192prEN 14044:2010High rise aerial appliances for fire service useTurntable ladders with sequential movements Safety andperformance requirements and test methodsData Limite: 2011-02-23Lista mensal ▪ documentos normativos imp DNOR-01-06 36 14 Outubro 2010

DOCUMENTOSnormativosTC 193prEN 828:2010Adhesives Wettability Determination by measurement ofcontact angle and surface free energy of solid surfaceData Limite: 2011-02-02TC 193prEN 1238:2010Adhesives Determination of the softening point ofthermoplastic adhesives (ring and ball)Data Limite: 2011-02-09TC 193prEN 1239:2010Adhesives Freeze-thaw stabilityData Limite: 2011-02-09TC 193prEN 1240:2010Adhesives Determination of hydroxyl value and/orhydroxyl contentData Limite: 2011-02-09TC 193prEN 1243:2010Adhesives Determination of free formaldehyde in aminoand amidoformaldehyde condensatesData Limite: 2011-02-09TC 193prEN 1245:2010Adhesives Determination of pHData Limite: 2011-02-09TC 193prEN 1965-1:2010Structural adhesives Corrosion Part 1: Determination andclassification of corrosion to a copper substrateData Limite: 2011-02-09TC 193prEN 1965-2:2010Structural adhesives Corrosion Part 2: Determination andclassification of corrosion to a brass substrateData Limite: 2011-02-09TC 193prEN 12705:2010Adhesives for leather and footwear materialsDetermination of colour change of white or brightcoloured leather surfaces by migrationData Limite: 2010-12-23TC 193prEN 12962:2010Adhesives Determination of elastic behaviour of liquidadhesives (elasticity index)Data Limite: 2011-02-09TC 193prEN 14294:2010Adhesives for leather and footwear materials Preparationof bonded test pieces by moulding-on processesData Limite: 2010-11-27TC 193prEN 14869-1:2010Structural adhesives Determination of shear behaviour ofstructural bonds Part 1: Torsion test method usingbutt-bonded hollow cylinders(ISO 11003-1:2001 Modified)Data Limite: 2011-02-09Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 193prEN 14869-2:2010Structural adhesives Determination of shear behaviour ofstructural bonds Part 2: Thick adherends shear test(ISO 11003-2:2001 Modified)Data Limite: 2011-02-09TC 197prEN ISO 2858:2010End-suction centrifugal pumps (rating 16 bar)Designation, nominal duty point and dimensions (ISO2858:1975)Data Limite: 2010-11-03TC 197prEN ISO 3661:2010End-suction centrifugal pumps Baseplate andinstallation dimensions(ISO 3661:1977)Data Limite: 2010-11-03TC 205EN 455-2:2009 /prA 1:2010Medical gloves for single use Part 2: Requirements andtesting for physical propertiesData Limite: 2010-12-02TC 205prEN ISO 8362-6:2010Injection containers and accessories Part 6: Caps madeof aluminium-plastics combinations for injection vials(ISO 8362-6:2010)Data Limite: 2010-12-23TC 206prEN ISO 10993-12:2010Biological evaluation of medical devices Part 12: Samplepreparation and reference materials(ISO/DIS 10993- 12:2010)Data Limite: 2010-10-06TC 207EN 716-1:2008 /prA 1:2010Furniture Children's cots and folding cots for domesticuse Part 1: Safety requirementsData Limite: 2010-10-06TC 207EN 716-2:2008 /prA 1:2010Furniture Children's cots and folding cots for domesticuse Part 2: Test methodsData Limite: 2010-10-06TC 207prEN 16121:2010Non-domestic storage furniture Requirements for safety,strength, durability and stabilityData Limite: 2010-11-24TC 207prEN 16122:2010Non-domestic storage furniture Test methods for thedetermination of strength, durability and stabilityData Limite: 2010-11-24TC 207prEN 16139:2010Furniture Strength, durability and safety Requirementsfor non-domestic seatingData Limite: 2011-01-05TC 211prEN ISO 3745:2010Acoustics Determination of sound power levels and soundLista mensal ▪ documentos normativos imp DNOR-01-06 37 14 Outubro 2010

DOCUMENTOSnormativosenergy levels of noise sources using sound pressurePrecision methods for anechoic test rooms andhemi-anechoic test rooms(ISO/DIS 3745:2010)Data Limite: 2010-10-06TC 211prEN ISO 3746:2010Acoustics Determination of sound power levels and soundenergy levels of noise sources using sound pressureSurvey method using an enveloping measurement surfaceover a reflecting plane(ISO/FDIS 3746:2010)Data Limite: 2010-10-12TC 211prEN ISO 3747:2010Acoustics Determination of sound power levels and soundenergy levels of noise sources using sound pressureEngineering/survey methods for use in situ in areverberant environment(ISO/FDIS 3747:2010)Data Limite: 2010-10-05TC 215prEN ISO 5364:2010Anaesthetic and respiratory equipment Oropharyngealairways(ISO 5364:2008)Data Limite: 2011-02-23TC 215EN ISO 8835-3:2009 /prA 1:2010Inhalational anaesthesia systems Part 3: Transfer andreceiving systems of active anaesthetic gas scavengingsystems(ISO 8835-3:2007/FDAM 1:2010)Data Limite: 2010-10-08TC 215EN ISO 10524-3:2006 /prEN ISO 1:2010Pressure regulators for use with medical gases Part 3:Pressure regulators integrated with cylinder valves(ISO 10524-3:2005/DAM 1:2010)Data Limite: 2011-02-16TC 218prEN ISO 10619-1:2010Rubber and plastics hoses and tubing Measurement offlexibility and stiffness Part 1: Bending tests at ambienttemperature(ISO/DIS 10619-1:2010)Data Limite: 2010-11-09TC 218prEN ISO 10619-2:2010Rubber and plastics hoses and tubing Measurement offlexibility and stiffness Part 2: Bending tests atsubambient temperatures(ISO/DIS 10619-2:2010)Data Limite: 2010-11-16TC 218prEN ISO 10619-3:2010Rubber and plastics hoses and tubing Measurement offlexibility and stiffness Part 3: Bending tests at highand low temperatures(ISO/DIS 10619-3:2010)Data Limite: 2010-11-09TC 218prEN ISO 28017:2010Rubber hoses and hose assemblies, wire or textilereinforced, for dredging applications SpecificationPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização(ISO/DIS 28017:2010)Data Limite: 2010-11-03TC 224prEN 14169-3:2010Protection profiles for secure signature creation devicePart 3: Device with key importData Limite: 2010-12-29TC 224prEN 14169-4:2010Protection profiles for secure signature creation devicePart 4: Extension for device with key generation andtrusted communication with certificate generationapplicationData Limite: 2010-12-29TC 224prEN 14169-5:2010Protection profiles for secure signature creation devicePart 5: Device with key generation and trustedcommunication with signature-creation applicationData Limite: 2010-12-29TC 224prEN 14169-6:2010Protection profiles for secure signature creation devicePart 6: Device with key import and trusted communicationwith signature-creation applicationData Limite: 2010-12-29TC 226prEN 1317-8:2010Road restraint systems Part 8: Motorcycle road restraintsystems which reduce the impact severity of motorcyclistcollisions with safety barriersData Limite: 2011-01-26TC 226prEN 1793-1:2010Road traffic noise reducing devices Test method fordetermining the acoustic performance Part 1: Intrinsiccharacteristics of sound absorptionData Limite: 2010-11-03TC 226prEN 1793-2:2010Road traffic noise reducing devices Test method fordetermining the acoustic performance Part 2: Intrinsiccharacteristics of airborne sound insulation under diffusesound field conditionsData Limite: 2010-11-03TC 226prEN 1793-6:2010Road traffic noise reducing devices Test method fordetermining the acoustic performance Part 6: Intrinsiccharacteristics - In situ values of airborne soundinsulation under direct sound field conditionsData Limite: 2010-11-03TC 226prEN 1794-1:2010Road traffic noise reducing devices Non-acousticperformance Part 1: Mechanical performance andstability requirementsData Limite: 2010-11-09TC 226prEN 1794-2:2010Road traffic noise reducing devices Non-acousticperformance Part 2: General safety and environmentalrequirementsData Limite: 2010-11-09Lista mensal ▪ documentos normativos imp DNOR-01-06 38 14 Outubro 2010

DOCUMENTOSnormativosTC 226prEN 14388:2010Road traffic noise reducing devices SpecificationsData Limite: 2010-11-03TC 228prEN 15316-4-8:2010Heating systems in buildings Method for calculation ofsystem energy requirements and system efficienciesPart 4-8: Space heating generation systems, air heatingand overhead radiant heating systemsData Limite: 2010-12-08TC 229prEN 13225:2010Precast concrete products Linear structural elementsData Limite: 2011-02-09TC 229prEN 13369:2010Common rules for precast concrete productsData Limite: 2010-11-03TC 229EN 15037-2:2009 /prA 1:2010Precast concrete products Beam-and-block floor systemsPart 2: Concrete blocksData Limite: 2010-12-09TC 229EN 15037-3:2009 /prA 1:2010Precast concrete products Beam-and-block floor systemsPart 3: Clay blocksData Limite: 2010-12-09TC 230prCEN/TR 16151:2010Water quality Guidance standard on the design ofMultimetric IndicesData Limite: 2010-11-26TC 230prEN 16150:2010Water quality Guidance on pro-rata Multi-Habitatsampling of benthic macro-invertebrates from wadeableriversData Limite: 2011-01-19TC 230prEN 16164:2010Water quality Guidance standard for designing andselecting taxonomic keysData Limite: 2011-02-23TC 230prEN ISO 5814:2010Water quality Determination of dissolved oxygenElectrochemical probe method(ISO/DIS 5814:2010)Data Limite: 2010-10-20TC 230prEN ISO 8692:2010Water quality Fresh-water algal growth inhibition testwith unicellular green algae(ISO/DIS 8692:2010)Data Limite: 2011-01-12TC 231EN 30326-1:1994 /prA 2:2010Mechanical vibration Laboratory method for evaluatingvehicle seat vibration Part 1: Basic requirements -Amendment 2Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização(ISO 10326-1:1992/DAM 2:2010)Data Limite: 2010-11-10TC 231EN ISO 20643:2008 /prA 1:2010Mechanical vibration Hand-held and hand-guidedmachinery Principles for evaluation of vibration emissionAmendment 1: Accelerometer positions(ISO 20643:2005/DAM 1:2010)Data Limite: 2010-12-01TC 231prEN ISO 28927-4:2010Hand-held portable power tools Test methods forevaluation of vibration emission Part 4: Straight grinders(ISO/FDIS 28927-4:2010)Data Limite: 2010-11-16TC 231prEN ISO 28927-12:2010Hand-held portable power tools Test methods forevaluation of vibration emission Part 12: Die grinders(ISO/DIS 28927-12:2010)Data Limite: 2011-01-05TC 237prEN 12480:2010Gas meters Rotary displacement metersData Limite: 2011-02-28TC 240prEN ISO 12690:2010Metallic and other inorganic coatings Thermal spraycoordination Tasks and responsibilities(ISO/FDIS 12690:2010)Data Limite: 2010-11-16TC 240prEN ISO 13123:2010Metallic and other inorganic coatings Test method ofcyclic heating for thermal-barrier coatings undertemperature gradient(ISO/DIS 13123:2010)Data Limite: 2010-12-22TC 240prEN ISO 14921:2010Thermal spraying Procedures for the application ofthermally sprayed coatings for engineering components(ISO/FDIS 14921:2010)Data Limite: 2010-11-09TC 241prEN 12859:2010Gypsum blocks Definitions, requirements and testmethodsData Limite: 2010-12-01TC 241prEN 15303-1:2010Design and application of plasterboard systems on framesPart 1: General principles of designData Limite: 2010-10-27TC 246prEN 16140:2010Natural stone test methods Determination of sensitivityto changes in appearance produced by thermal cyclesData Limite: 2011-01-12TC 247prEN ISO 16484-5:2010Building automation and control systems Part 5: Datacommunication protocolLista mensal ▪ documentos normativos imp DNOR-01-06 39 14 Outubro 2010

DOCUMENTOSnormativos(ISO/FDIS 16484-5:2010)Data Limite: 2010-11-05TC 248prEN 13772:2010Textiles and textile products Burning behaviour Curtainsand drapes - Measurement of flame spread of verticallyoriented specimens with large ignition sourceData Limite: 2010-11-02TC 248prEN ISO 1833-24:2010Textiles Quantitative chemical analysis Part 24:Mixtures of polyester and certain other fibres (methodusing phenol and tetrachloroethane) (ISO 1833-24:2010)Data Limite: 2010-12-01TC 248prEN ISO 32100:2010Rubber- or plastics-coated fabrics Physical andmechanical tests Determination of flex resistance by theflexometer method(ISO/FDIS 32100:2010)Data Limite: 2010-11-09TC 249prCEN/TS 16137:2010Plastics Determination of bio-based carbon contentData Limite: 2010-11-19TC 249prEN ISO 178:2010Plastics Determination of flexural properties(ISO/FDIS 178:2010)Data Limite: 2010-11-16TC 249prEN ISO 877-1:2010Plastics Methods of exposure to solar radiation Part 1:General guidance(ISO 877-1:2009)Data Limite: 2010-11-03TC 249prEN ISO 877-2:2010Plastics Methods of exposure to solar radiation Part 2:Direct weathering and exposure behind window glass(ISO 877-2:2009)Data Limite: 2010-11-03TC 249prEN ISO 877-3:2010Plastics Methods of exposure to solar radiation Part 3:Intensified weathering using concentrated solar radiation(ISO 877-3:2009)Data Limite: 2010-11-03TC 249prEN ISO 1622-1:2010Plastics Polystyrene (PS) moulding and extrusionmaterials Part 1: Designation system and basis forspecifications(ISO/DIS 1622-1:2010)Data Limite: 2010-12-22TC 249prEN ISO 1874-1:2010Plastics Polyamide (PA) moulding and extrusion materialsPart 1: Designation system and basis for specification(ISO/FDIS 1874-1:2010)Data Limite: 2010-10-12Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 249EN ISO 1874-2:2006 /prA 1:2010Plastics Polyamide (PA) moulding and extrusion materialsPart 2: Preparation of test specimens and determination ofproperties -Amendment 1: Laser sintering of specimens (ISO1874-2:2006/FDAM 1:2010)Data Limite: 2010-10-12TC 249prEN ISO 4611:2010Plastics Determination of the effects of exposure to dampheat, water spray and salt mist(ISO/FDIS 4611:2010)Data Limite: 2010-11-16TC 249prEN ISO 10352:2010Fibre-reinforced plastics Moulding compounds andprepregs Determination of mass per unit area(ISO/FDIS 10352:2010)Data Limite: 2010-11-09TC 249prEN ISO 11337:2010Plastics Polyamides Determination of e-caprolactamand w-laurolactam by gas chromatography(ISO/FDIS 11337:2010)Data Limite: 2010-11-09TC 249prEN ISO 11833-1:2010Plastics Unplasticized poly(vinyl chloride) sheets -Types, dimensions and characteristics Part 1: Sheets ofthickness not less than 1 mm(ISO/DIS 11833-1:2010)Data Limite: 2010-11-03TC 249EN ISO 14125:1998 /prA 1:2010Fibre-reinforced plastic composites Determination offlexural properties Amendment 1(ISO 14125:1998/FDAM 1:2010)Data Limite: 2010-12-30TC 251prEN ISO 11238:2010Health Informatics Identification of medicinal productsData and structures for unique identification andexchange of regulated information on substances(ISO/DIS 11238:2010)Data Limite: 2011-02-23TC 251prEN ISO 11239:2010Health informatics Identification of medicinal productsData elements and structures for unique identificationand exchange of regulated information on pharmaceuticaldose forms, units of presentation and routes ofadministration (ISO/DIS 11239:2010)Data Limite: 2011-02-23TC 251prEN ISO 11240:2010Health informatics Identification of medicinal productsData elements and structures for unique identificationand exchange of units of measurement (ISO/DIS11240:2010)Data Limite: 2011-02-23TC 251prEN ISO 11615:2010Health informatics Identification of medicinal productsData elements and structures for unique identificationLista mensal ▪ documentos normativos imp DNOR-01-06 40 14 Outubro 2010

DOCUMENTOSnormativosand exchange of regulated medicinal productinformation (ISO/DIS 11615:2010)Data Limite: 2011-02-23TC 251prEN ISO 11616:2010Health informatics Identification of medicinal productsData elements and structures for unique identificationand exchange of regulated pharmaceutical productinformation (ISO/DIS 11616:2010)Data Limite: 2011-02-23TC 251prEN ISO 12052:2010Health informatics Digital imaging and communicationin medicine (DICOM) including workflow and datamanagement (ISO 12052:2006)Data Limite: 2011-02-09TC 251prEN ISO 12967-1:2010Health informatics Service architecture Part 1:Enterprise viewpoint(ISO 12967-1:2009)Data Limite: 2011-02-09TC 251prEN ISO 12967-2:2010Health informatics Service architecture Part 2:Information viewpoint(ISO 12967-2:2009)Data Limite: 2011-02-09TC 251prEN ISO 12967-3:2010Health informatics Service architecture Part 3:Computational viewpoint(ISO 12967-3:2009)Data Limite: 2011-02-09TC 252EN 12586:2007 /prA 1:2010Child use and care articles Soother holder Safetyrequirements and test methodsData Limite: 2010-10-22TC 252prEN 16120:2010Child use and care articles Chair mounted seatData Limite: 2010-11-17TC 254prEN 1110:2010Flexible sheets for waterproofing Bitumen sheets forroof waterproofing Determination of flow resistanceData Limite: 2010-10-20TC 256prCEN/TS 13979-2:2010Railway applications Wheelsets and bogies - Monoblocwheels - Technical approval procedure Part 2: CastwheelsData Limite: 2010-12-02TC 256prCEN/TS 15718:2010Railway applications Wheelsets and bogies Productrequirements for cast wheelsData Limite: 2010-12-02TC 256EN 13262:2004 /prA 2:2010Railway applications Wheelsets and bogies Wheels -Product requirementsPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2010-12-23TC 256prEN 13481-1:2010Railway applications Track - Performance requirementsfor fastening systems Part 1: DefinitionsData Limite: 2010-11-03TC 256prEN 13481-2:2010Railway applications Track - Performance requirementsfor fastening systems Part 2: Fastening systems forconcrete sleepersData Limite: 2010-11-03TC 256prEN 13481-3:2010Railway applications Track - Performance requirementsfor fastening systems Part 3: Fastening systems for woodsleepersData Limite: 2010-11-03TC 256prEN 13481-4:2010Railway applications Track - Performance requirementsfor fastening systems Part 4: Fastening systems for steelsleepersData Limite: 2010-11-03TC 256prEN 13481-5:2010Railway applications Track - Performance requirements forfastening systems Part 5: Fastening systems for slab trackwith rail on the surface or rail embedded in a channelData Limite: 2010-11-03TC 256prEN 13481-7:2010Railway applications Track - Performance requirementsfor fastening systems Part 7: Special fastening systemsfor switches and crossings and check railsData Limite: 2010-11-30TC 256prEN 13674-1:2010Railway applications Track - Rail Part 1: Vignolerailway rails 46 kg/m and aboveData Limite: 2010-11-09TC 256prEN 13977:2010Railway applications Track Safety requirements forportable machines and trolleys for construction andmaintenanceData Limite: 2010-11-23TC 256EN 13979-1:2003 /prA 2:2010Railway applications Wheelsets and bogies - Monoblocwheels - Technical approval procedure Part 1: Forgedand rolled wheelsData Limite: 2010-12-23TC 256prEN 15437-2:2010Railway applications Axlebox condition monitoring -Performance requirements Part 2: Onboard systems fortemperature monitoringData Limite: 2010-10-27TC 256prEN 15807:2010Railway applications Pneumatic half couplingsData Limite: 2010-11-02Lista mensal ▪ documentos normativos imp DNOR-01-06 41 14 Outubro 2010

DOCUMENTOSnormativosTC 256prEN 15892:2010Railway applications Noise Emission Measurement ofnoise inside driver's cabsData Limite: 2010-11-23TC 256prEN 16116-1:2010Railway applications Design requirements for steps,handrails and associated staff access Part 1: Passengervehicles, luggage vans and locomotivesData Limite: 2010-12-29TC 256prEN 16116-2:2010Railway applications Design requirements for steps,handrails and associated staff access Part 2: FreightwagonsData Limite: 2010-12-29TC 258prEN ISO 14155:2010Clinical investigation of medical devices for humansubjects Good clinical practice(ISO/FDIS 14155:2010)Data Limite: 2010-11-09TC 259prEN 12952-7:2010Water-tube boilers and auxiliary installations Part 7:Requirements for equipment for the boilerData Limite: 2010-10-20TC 260prEN 15962:2010Fertilizers Determination of the complexedmicro-nutrient content and of the complexed fraction ofmicronutrientsData Limite: 2010-11-02TC 260prEN 16109:2010Fertilizers Determination of micro-nutrient ions complexedin fertilizers Identification of lignosulfonatesData Limite: 2010-10-13Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2011-02-16TC 262prEN ISO 28721-2:2010Vitreous and porcelain enamels Glass-lined apparatus forprocess plants Part 2: Designation and specification ofresistance to chemical attack and thermal shock(ISO 28721-2:2008)Data Limite: 2011-02-16TC 262prEN ISO 28721-3:2010Vitreous and porcelain enamels Glass-lined apparatus forprocess plants Part 3: Thermal shock resistance(ISO 28721-3:2008)Data Limite: 2011-02-16TC 262prEN ISO 28722:2010Vitreous and porcelain enamels Characteristics of enamelcoatings applied to steel panels intended for architecture(ISO 28722:2008)Data Limite: 2011-02-02TC 262prEN ISO 28723:2010Vitreous and porcelain enamels Determination of the edgecovering on enamelled steel plate to be used in heatexchangers(ISO 28723:2008)Data Limite: 2011-02-02TC 262prEN ISO 28762:2010Vitreous and porcelain enamels Enamel coatings applied tosteel for writing surfaces Specification(ISO/FDIS 28762:2010)Data Limite: 2010-10-22TC 262prEN ISO 28763:2010Vitreous and porcelain enamels Regenerative, enamelledand packed panels for air-gas and gas-gas heatexchangers Specifications(ISO 28763:2008)Data Limite: 2011-02-02TC 261prCEN/TS 15945:2010Packaging Ease of opening Criteria and test method forevaluating consumer packagingData Limite: 2010-12-16TC 262prEN ISO 3613:2010Metallic and other inorganic coatings Chromateconversion coatings on zinc, cadmium, aluminium-zincalloys and zinc-aluminium alloys Test methods(ISO/FDIS 3613:2010)Data Limite: 2010-11-02TC 262prEN ISO 4534:2010Vitreous and porcelain enamels Determination of fluiditybehaviour Fusion flow test(ISO/FDIS 4534:2010)Data Limite: 2010-11-16TC 262prEN ISO 28721-1:2010Vitreous and porcelain enamels Glass-lined apparatus forprocess plants Part 1: Quality requirements forapparatus, components, appliances and accessories(ISO 28721-1:2008)TC 262prEN ISO 28764:2010Vitreous and porcelain enamels Production of specimensfor testing enamels on sheet steel, sheet aluminium andcast iron(ISO 28764:2008)Data Limite: 2011-02-02TC 262prEN ISO 28765:2010Vitreous and porcelain enamels Design of bolted steeltanks for the storage or treatment of water or municipalor industrial effluents and sludges (ISO 28765:2008)Data Limite: 2011-02-02TC 264prEN ISO 11771:2010Air quality Determination of time-averaged massemissions and emission factors General approach(ISO/FDIS 11771:2010)Data Limite: 2010-10-26TC 264prEN ISO 16000-26:2010Indoor air Part 26: Sampling strategy for carbon dioxide(CO2)(ISO/DIS 16000-26:2010)Lista mensal ▪ documentos normativos imp DNOR-01-06 42 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2011-01-26TC 266EN 13341:2005 /prA 1:2010Static thermoplastic tanks for above ground storage ofdomestic heating oils, kerosene and diesel fuels Blowmoulded and rotationally moulded polyethylene tanksand rotationally moulded tanks made of anionicallypolymerized polyamide 6 Requirements and test methodsData Limite: 2010-10-26TC 269prEN 12953-6:2010Shell Boilers Part 6: Requirements for equipment for theboilerData Limite: 2010-11-30TC 270EN 1679-1:1998 /prA 1:2010Reciprocating internal combustion engines Safety Part1: Compression ignition enginesData Limite: 2010-10-27TC 275CEN ISO/TS 11133-2:2003 /prA 1:2010Microbiology of food and animal feeding stuffsGuidelines on preparation and production of culturemedia Part 2: Practical guidelines on performancetesting of culture media - Amendment 1: Testmicroorganisms for commonly used culture media(ISO/TS 11133-2:2003/FDAM 1:2010)Data Limite: 2010-11-12TC 275prEN 16155:2010Foodstuffs Determination of sucralose Highperformance liquid chromatographic methodData Limite: 2011-02-23TC 275EN ISO 6887-4:2003 /prA 1:2010Microbiology of food and animal feeding stuffs – Preparation of testsamples, initial suspension and decimal dilutions for microbiologicalexamination .Part 4: Specific rules for the preparation of products other than milkand milk products, meat and meat products, and fish and fisheryprodutcs(ISO 6887-4:2003/DAM 1:2010)Data Limite: 2010-11-24TC 278prCEN/TR 16152:2010Electronic fee collection Personalisation and mountingof first mount OBEData Limite: 2010-12-16TC 278prCEN/TS 15531-4:2010Public transport Service interface for real-timeinformation relating to public transport operations Part4: Functional service interfaces: Facility MonitoringData Limite: 2010-12-16TC 278prEN 15876-2:2010Electronic fee collection Evaluation of on-board androadside equipment for conformity to EN 15509 Part 2:Abstract test suiteData Limite: 2010-11-16Publicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãoauditory presentation(ISO/DIS 15006:2010)Data Limite: 2010-11-03TC 282prEN ISO 28460:2010Petroleum and natural gas industries Installation andequipment for liquefied natural gas Ship-to-shoreinterface and port operations(ISO/FDIS 28460:2010Data Limite: 2010-11-09TC 286prEN 12816:2010LPG equipment and accessories Transportable refillableLPG cylinders DisposalData Limite: 2010-10-19TC 286prEN 13109:2010LPG equipment and accessories LPG tanks and drumsDisposalData Limite: 2010-10-19TC 286prEN 13175:2010LPG Equipment and accessories Specification and testingfor Liquefied Petroleum Gas (LPG) tank valves andfittingsData Limite: 2010-11-10TC 286prEN 14334:2010LPG equipment and accessories Inspection and testing ofLPG road tankersData Limite: 2010-12-01TC 286prEN 14678-1:2010LPG equipment and accessories Construction andperformance of LPG equipment for automotive fillingstationsPart 1: DispensersData Limite: 2010-12-08TC 286prEN 14678-3:2010LPG equipment and accessories Refuelling installations atprivate and industrial premisesData Limite: 2010-12-08TC 286prEN 15202:2010LPG equipment and accessories Essential operationaldimensions for LPG cylinder valve outlet and associatedequipment connectionsData Limite: 2010-11-10TC 286prEN 15609:2010LPG equipment and accessories LPG propulsion systemsfor boats, yachts and other craft Installation requirementsData Limite: 2010-11-17TC 286prEN 16119:2010LPG equipment and accessories Sealing caps and plugs forcylinder and tank valves Specification and testingData Limite: 2010-11-10TC 278prEN ISO 15006:2010Road vehicles Ergonomic aspects of transport informationand control systems Specifications for in-vehicleTC 286prEN 16125:2010LPG equipment and accessories Pipework systems andsupports LPG liquid phase and vapour pressure phaseLista mensal ▪ documentos normativos imp DNOR-01-06 43 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-11-24TC 287prCEN/TR 15449:2010Geographic information Standards, specifications,technical reports and guidelines, required to implementSpatial Data InfrastructuresData Limite: 2010-10-07TC 287prEN ISO 19142:2010Geographic information Web Feature Service(ISO/DIS 19142:2009)Data Limite: 2010-11-16TC 289prEN ISO 2419:2010Leather Physical and mechanical tests Samplepreparation and conditioning(ISO/DIS 2419:2010)Data Limite: 2011-01-26TC 289prEN ISO 17076-1:2010Leather Determination of abrasion resistance Part 1:Taber method(ISO/DIS 17076-1:2010)Data Limite: 2011-01-26TC 289prEN ISO 26082-1:2010Leather Physical and mechanical test method for thedetermination of soiling Part 1: Rubbing (Martindale)method(ISO/DIS 26082-1:2010)Data Limite: 2011-01-26TC 290EN ISO 1302:2002 /prA 2:2010Geometrical Product Specifications (GPS) Indication ofsurface texture in technical product documentationAmendment 2: Indication of material ratio requirements(ISO 1302:2002/DAM 2:2010)Data Limite: 2010-12-22TC 290EN ISO 5436-2:2001 /prA 1:2010Geometrical Product Specifications (GPS) Surfacetexture: Profile method; Measurement standards Part2: Software measurement standards - Amendment 1(ISO 5436-2:2001/DAM 1:2010)Data Limite: 2010-12-29TC 290prEN ISO 10360-9:2010Geometrical product specifications (GPS) Acceptanceand reverification tests for coordinate measuringmachines (CMM) Part 9: CMMs with multiple probingsystems(ISO/DIS 10360-9:2010)Data Limite: 2010-11-24TC 290prEN ISO 13225:2010Geometrical product specifications (GPS) Dimensionalmeasuring equipment; Height gauges Design andmetrological characteristics(ISO/DIS 13225:2010)Data Limite: 2010-10-19TC 290prEN ISO 14405-1:2010Geometrical product specifications (GPS) DimensionalPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãotolerancing Part 1: Linear sizes(ISO/FDIS 14405-1:2010)Data Limite: 2010-10-12TC 290EN ISO 14660-2:1999 /prA 1:2010Geometrical Product Specifications (GPS) Geometricalfeatures Part 2: Extracted median line of a cylinder anda cone, extracted median surface, local size of anextracted feature (ISO 14660-2:1999/DAM 1:2010)Data Limite: 2011-01-12TC 290prEN ISO 25178-604:2010Geometrical product specifications (GPS) Surfacetexture: Areal Part 604: Nominal characteristics ofnoncontact (coherence scanning interferometry)instruments (ISO/DIS 25178-604:2010)Data Limite: 2010-11-24TC 292prCEN/TR 16130:2010Characterization of waste On-site verificationData Limite: 2010-10-29TC 292prCEN/TS 15862:2010Characterization of waste Compliance leaching test Onestage batch leaching test for monoliths at fixed liquidto surface area ratio (L/A) for test portions with fixedminimum dimensionsData Limite: 2010-11-05TC 292prCEN/TS 15863:2010Characterisation of waste Leaching behaviour test forbasic characterisation Dynamic Monolithic Leaching Testwith periodic leachant renewal, under fixed testconditionsData Limite: 2010-11-26TC 292prCEN/TS 15864:2010Characterisation of waste Leaching behaviour test forbasic characterisation Dynamic Monolithic Leaching Testwith continuous leachant renewal under conditionsrelevant for specified scenario(s)Data Limite: 2010-11-19TC 292prEN 16123:2010Characterization of waste Guidance on selection andapplication of screening methodsData Limite: 2010-11-24TC 297prEN 13084-7:2010Free-standing chimneys Product specifications ofcylindrical steel fabrications for use in single wall steelchimneys and steel linersData Limite: 2011-02-23TC 297prEN 16155:2010Free-standing chimneys Product specifications ofcylindrical steel fabrications for use in single wall steelchimneys and steel linersData Limite: 2011-02-23TC 305EN 14034-1:2004 /prEN 1:2010Determination of explosion characteristics of dustclouds Part 1: Determination of the maximum explosionpressure pmax of dust cloudsLista mensal ▪ documentos normativos imp DNOR-01-06 44 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-10-12TC 305EN 14034-2:2006 /prA 1:2010Determination of explosion characteristics of dustclouds Part 2: Determination of the maximum rate ofexplosion pressure rise (dp/dt)max of dust cloudsData Limite: 2010-10-12TC 305EN 14034-3:2006 /prA 1:2010Determination of explosion characteristics of dust cloudsPart 3: Determination of the lower explosion limit LEL ofdust cloudsData Limite: 2010-10-12TC 305EN 14034-4:2004 /prA 1:2010Determination of explosion characteristics of dustclouds Part 4: Determination of the limiting oxygenconcentration LOC of dust cloudsData Limite: 2010-10-12TC 307EN ISO 9936:2006 /prEN ISO 1:2010Animal and vegetable fats and oils Determination oftocopherol and tocotrienol contents byhigh-performance liquid chromatography Amendment 1(ISO 9936:2006/DAM 1:2010)Data Limite: 2010-11-10TC 307EN ISO 15753:2006 /prA 1:2010Animal and vegetable fats and oils Determination ofpolycyclic aromatic hydrocarbons(ISO 15753:2006/DAM 1:2010)Data Limite: 2010-11-10TC 307prEN ISO 17932:2010Vegetable oils Determination of the deterioration ofbleachability index (DOBI) and carotene content(ISO/DIS 17932:2010)Data Limite: 2010-12-15TC 309prEN ISO 10717:2010Footwear Test method for slide fasteners Burst strength(ISO/FDIS 10717:2010)Data Limite: 2010-10-26TC 309prEN ISO 10748:2010Footwear Test method for slide fasteners Slider lockingstrength(ISO/FDIS 10748:2010)Data Limite: 2010-11-30TC 309prEN ISO 20877:2010Footwear Test methods for whole shoe Thermalinsulation(ISO/DIS 20877:2010)Data Limite: 2010-10-12TC 327prEN 16158:2010Animal feeding stuffs Determination of semduramicincontent Liquid chromatographic method using a treeanalytical approachData Limite: 2011-02-28TC 327Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoprEN 16159:2010Animal feeding stuffs Determination of selenium byhydride generation atomic absorption spectrometry(HGAAS) after microwave digestion (extraction with 65%nitric acid and 30% hydrogen peroxide)Data Limite: 2011-02-28TC 333prEN 13126-3:2010Building hardware Hardware for windows and door-heightwindows - Requirements and test methods Part 3:Handles, primarily for Tilt and Turn, Tilt-First andTurn-Only hardwareData Limite: 2010-11-03TC 335prEN 14961-2:2010Solid biofuels Fuel specifications and classes Part 2:Wood pellets for non-industrial useData Limite: 2010-11-17TC 335prEN 14961-3:2010Solid biofuels Fuel specifications and classes Part 3:Wood briquettes for non- industrial useData Limite: 2010-11-17TC 335prEN 14961-4:2010Solid biofuels Fuel specifications and classes Part 4:Wood chips for non-industrial useData Limite: 2010-11-17TC 335prEN 14961-5:2010Solid biofuels Fuel specifications and classes Part 5:Firewood for non-industrial useData Limite: 2010-11-17TC 335prEN 15104:2010Solid biofuels Determination of total content of carbon,hydrogen and nitrogen Instrumental methodsData Limite: 2010-11-24TC 335prEN 15105:2010Solid biofuels Determination of the water solublechloride, sodium and potassium contentData Limite: 2010-11-24TC 335prEN 15234-1:2010Solid biofuels Fuel quality assurance Part 1: GeneralrequirementsData Limite: 2010-11-17TC 335prEN 15289:2010Solid biofuels Determination of total content of sulfurand chlorineData Limite: 2010-11-24TC 335prEN 15290:2010Solid biofuels Determination of major elements Al, Ca,Fe, Mg, P, K, Si, Na and TiData Limite: 2010-11-24TC 335prEN 15296:2010Solid biofuels Conversion of analytical results from onebasis to anotherData Limite: 2010-11-24Lista mensal ▪ documentos normativos imp DNOR-01-06 45 14 Outubro 2010

DOCUMENTOSnormativosPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 335prEN 15297:2010Solid biofuels Determination of minor elements As, Cd,Co, Cr, Cu, Hg, Mn, Mo, Ni, Pb, Sb, V and ZnData Limite: 2010-11-24TC 335prEN 16126:2010Solid biofuels Determination of particle size distributionof disintegrated pelletsData Limite: 2010-12-01TC 335prEN 16127:2010Solid biofuels Determination of length and diameter ofpelletsData Limite: 2010-12-01TC 337prEN 15429-2:2010Sweepers Part 2: Performance requirements and testmethodsData Limite: 2010-10-19TC 337EN 15430-1:2007 /prA 1:2010Winter and road service area maintenance equipments Dataacquisition and transmission Part 1: In vehicle dataacquisitionData Limite: 2010-11-26TC 337prEN 15518-1:2010Winter maintenance equipment Road weather informationsystems Part 1: Global definitions and componentsData Limite: 2010-11-30TC 337prEN 15518-2:2010Winter maintenance equipment Road weather informationsystems Part 2: Road weather - Recommendedobservation and forecastData Limite: 2010-11-30TC 337prEN 15518-3:2010Winter maintenance equipment Road weather informationsystems Part 3: Requirements on measured values ofstationary equipmentsData Limite: 2010-11-30TC 338prEN ISO 520:2010Cereals and pulses Determination of the mass of 1000grains(ISO/FDIS 520:2010)Data Limite: 2010-10-12TC 338prEN ISO 11746:2010Rice Determination of biometric characteristics ofkernels(ISO/DIS 11746:2010)Data Limite: 2011-01-26TC 343prEN 15415-1:2010Solid recovered fuels Determination of particle sizedistribution Part 1: Screen method for small dimensionparticlesData Limite: 2010-11-10TC 343prEN 15415-2:2010Solid recovered fuels Determination of particle sizedistribution Part 2: Maximum projected length method(manual) for large dimension particlesData Limite: 2011-01-19TC 343prEN 15415-3:2010Solid recovered fuels Determination of particle sizedistribution Part 3: Method by image analysis for largedimension particlesData Limite: 2011-01-19TC 346prEN 16141:2010Conservation of cultural heritage Guidelines formanagement of environmental conditions Open storagefacilities: definitions and characteristics of collectioncentres dedicated to the reservation and management ofcultural heritageData Limite: 2011-01-05TC 352prEN ISO 10801:2010Nanotechnologies Generation of metal nanoparticles forinhalation toxicity testing using theevaporation/condensation method (ISO/FDIS10801:2010)Data Limite: 2010-11-16TC 352prEN ISO 10808:2010Nanotechnologies Characterization of nanoparticles ininhalation exposure chambers for inhalation toxicitytesting (ISO/FDIS 10808:2010)Data Limite: 2010-11-09TC 361prEN 15812:2010Polymer modified bituminous thick coatings forwaterproofing Determination of crack bridging abilityData Limite: 2011-01-12TC 361prEN 15813:2010Polymer modified bituminous thick coatings forwaterproofing Determination of flexibility at lowtemperaturesData Limite: 2011-01-12TC 361prEN 15815:2010Polymer modified bituminous thick coatings forwaterproofing Resistance to compressionData Limite: 2011-01-12TC 361prEN 15816:2010Polymer modified bituminous thick coatings forwaterproofing Resistance to rainData Limite: 2011-01-12TC 361prEN 15817:2010Polymer modified bituminous thick coatings forwaterproofing Water resistanceData Limite: 2011-01-12TC 361prEN 15818:2010Lista mensal ▪ documentos normativos imp DNOR-01-06 46 14 Outubro 2010

DOCUMENTOSnormativosPolymer modified bituminous thick coatings forwaterproofing Determination of dimensional stability athigh temperatureData Limite: 2011-01-12TC 361prEN 15819:2010Polymer modified bituminous thick coatings forwaterproofing Reduction of the thickness of the layerwhen fully driedData Limite: 2011-01-12TC 361prEN 15820:2010Polymer modified bituminous thick coatings forwaterproofing Determination of watertightnessData Limite: 2011-01-12TC 377prEN 16154:2010Air Traffic Management Software assurance levelsData Limite: 2011-02-16TC 385prEN 16118:2010Sheltered housing Requirements for services for elderlypeople provided in a sheltered housing schemeData Limite: 2010-11-03TC CSF01prEN ISO 10628-2:2010Diagrams for the chemical and petrochemical industryPart 2: Graphical symbols(ISO/DIS 10628-2:2010)Data Limite: 2010-12-15TC CST01prEN ISO 12217-2:2010Small craft Stability and buoyancy assessment andcategorization Part 2: Sailing boats of hull length greaterthan or equal to 6 m(ISO/DIS 12217-2:2010)Data Limite: 2010-10-06TC CST01prEN ISO 12217-3:2010Small craft Stability and buoyancy assessment andcategorization Part 3: Boats of hull length less than 6 m(ISO/DIS 12217-3:2010)Data Limite: 2010-10-06TC CSB02EN ISO 11600:2003 /prA 1:2010Building construction Jointing products Classificationand requirements for sealants(ISO 11600:2002/DAM 1:2010)Data Limite: 2010-10-06TC CSM11prEN ISO 3927:2010Metallic powders, excluding powders for hardmetalsDetermination of compressibility in uniaxialcompression(ISO/FDIS 3927:2010)Data Limite: 2010-12-09TC CSF20prEN ISO 19011:2010Guidelines for auditing management systems(ISO/DIS 19011:2010)Data Limite: 2010-11-17TC CSN21prEN ISO 6145-5:2010Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoGas analysis Preparation of calibration gas mixturesusing dynamic volumetric methods Part 5: Capillarycalibration devices(ISO 6145-5:2009)Data Limite: 2010-11-10TC CSN21prEN ISO 6145-7:2010Gas analysis Preparation of calibration gas mixturesusing dynamic volumetric methods Part 7: Thermalmassflow controllers(ISO 6145-7:2009)Data Limite: 2010-11-10TC CSN21prEN ISO 6145-9:2010Gas analysis Preparation of calibration gas mixturesusing dynamic volumetric methods Part 9: Saturationmethod(ISO 6145-9:2009)Data Limite: 2010-11-10TC CSS26prEN ISO 14051:2010Environmental management Material flow costaccounting General framework(ISO/DIS 14051:2010)Data Limite: 2010-10-27TC ECISS/29prEN ISO 10893-12:2010Non-destructive testing of steel tubes Part 12:Automated full peripheral ultrasonic thickness testingof seamless and welded (except submerged arc-welded)steel tubes (ISO/FDIS 10893-12:2010)Data Limite: 2010-11-09TC ECISS/109prEN 10209:2010Cold rolled low carbon steel flat products for vitreousenamellingTechnical delivery conditionsData Limite: 2010-12-08TC ECISS/110prEN 10352:2010Stainless steel plumbing fittings Fittings with press endsfor metallic tubesData Limite: 2011-02-16TC ECISS/110prEN ISO 10893-1:2010Non-destructive testing of steel tubes Part 1: Automatedelectromagnetic testing of seamless and welded (exceptsubmerged arc-welded) steel tubes for the verification ofhydraulic leaktightness instead of the hydrostatic test(ISO/FDIS 10893-1:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-2:2010Non-destructive testing of steel tubes Part 2: Automatededdy current testing of seamless and welded (exceptsubmerged arc-welded) steel tubes for the detection ofimperfections (ISO/FDIS 10893-2:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-3:2010Non-destructive testing of steel tubes Part 3: Automatedfull peripheral flux leakage testing of seamless andwelded (except submerged arc-welded) ferromagneticsteel tubes for the detection of longitudinal andtransverse imperfections (ISO/FDIS 10893-3:2010)Lista mensal ▪ documentos normativos imp DNOR-01-06 47 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-11-09TC ECISS/110prEN ISO 10893-4:2010Non-destructive testing of steel tubes Part 4: Liquidpenetrant inspection of seamless and welded steel tubesfor the detection of surface imperfections (ISO/FDIS10893-4:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-5:2010Non-destructive testing of steel tubes Part 5: Magneticparticle inspection of seamless and welded ferromagneticsteel tubes for the detection of surface imperfections(ISO/FDIS 10893-5:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-6:2010Non-destructive testing of steel tubes Part 6:Radiographic testing of the weld seam of welded steeltubes for the detection of imperfections (ISO/FDIS10893-6:2010)Data Limite: 2010-11-09Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC AECMAprEN 2825:2010Aerospace series Burning behaviour of non metallicmaterials under the influence of radiating heat andflames Determination of smoke densityData Limite: 2010-11-16TC AECMAprEN 2826:2010Aerospace series Burning behaviour of non metallicmaterials under the influence of radiating heat andflames Determination of gas components in the smokeData Limite: 2010-11-16TC AECMAprEN 4683:2010Aerospace series Steel FE-WM 3504 (X4CrNiMo16-5-1) Airmelted - Filller metal for welding - Wire and rodData Limite: 2010-10-26TC AECMAprEN 4685:2010Aerospace series Titanium Ti10V2Fe3Al Bars - D = 1 240 MPaData Limite: 2010-10-26TC ECISS/110prEN ISO 10893-7:2010Non-destructive testing of steel tubes Part 7: Digitalradiographic testing of the weld seam of welded steeltubes for the detection of imperfections (ISO/FDIS10893-7:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-8:2010Non-destructive testing of steel tubes Part 8: Automatedultrasonic testing of seamless and welded steel tubesfor the detection of laminar imperfections (ISO/FDIS10893-8:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-9:2010Non-destructive testing of steel tubes Part 9: Automatedultrasonic testing of strips/plates used for themanufacture of welded steel tubes for the detection oflaminar imperfections (ISO/FDIS 10893-9:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-10:2010Non-destructive testing of steel tubes Part 10: Automatedfull peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for thedetection of longitudinal and transverse imperfections(ISO/FDIS 10893-10:2010)Data Limite: 2010-11-09TC ECISS/110prEN ISO 10893-11:2010Non-destructive testing of steel tubes Part 11:Automated ultrasonic testing of weld seam of weldedsteel tubes for the detection of longitudinal andtransverse imperfections (ISO/FDIS 10893-11:2010)Data Limite: 2010-11-09TC AECMAprEN 2240-051:2010Aerospace series Lamps, incandescent Part 051: Lamp,code 1163 - Product standardData Limite: 2010-10-26Lista mensal ▪ documentos normativos imp DNOR-01-06 48 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização5.2 Questionários preliminaresLista de documentos de referência (RD) objecto de Questionários Preliminares (PQ), com vista àsua aceitação como normas europeias.LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 49 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização5.3 Comités Técnicos do CENLista dos Comités Técnicos do Comité Europeu de Normalização (CEN) em relação aos quais nãoexiste ONS (Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujos processos seencontram disponíveis para consulta no IPQ.AECMAEuropean association of aerospacemanufacturersCEN/TC 12Materials, equipment and offshore structuresfor petroleum and natural gas industriesCEN/TC 44Household refrigerating appliances andcommercial refrigerated cabinetsCEN/TC 50Lighting columns and spigotsCEN/TC 53Temporary works equipmentCEN/TC 87Gas fuelled smokers lightersCEN/TC 88Thermal insulating materials and productsCEN/TC 89Thermal performance of buildings andbuilding componentsCEN/TC 99WallcoveringsCEN/TC 105Valves and fittings to equip radiatorsCEN/TC 107Pre-fabricated district heating pipe systemsCEN/TC 113Heat pumps and air conditioning unitsCEN/TC 123Lasers and laser related equipmentCEN/TC 125MasonryCEN/TC 128Roof covering products for discontinuouslaying and products for wall claddingCEN/TC 130Space heating appliances without integralheat sourcesCEN/TC 135Execution of steel structuresCEN/TC 136Sports, playground and other recreationalequipmentCEN/TC 145Rubber and plastics machines - SafetyCEN/TC 146Packaging machines - SafetyCEN/TC 148Continuous handling equipment and systems- SafetyCEN/TC 149Rail-dependent storage and retrievalequipment - SafetyCEN/TC 150Industrial trucks - SafetyCEN/TC 151Construction equipment and buildingmaterial machines - SafetyCEN/TC 152Fairground and amusement park machineryand structures - SafetyCEN/TC 153Food processing machinery - Safety andhygiene specificationsCEN/TC 156Ventilation for buildingsCEN/TC 163Sanitary appliancesLista mensal ▪ documentos normativos imp DNOR-01-06 50 14 Outubro 2010

DOCUMENTOSnormativosCEN/TC 166ChimneysCEN/TC 167Structural bearingsCEN/TC 169Lighting applicationsPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoCEN/TC 197PumpsCEN/TC 198Printing and paper machinery - SafetyCEN/TC 200Tannery machinery - SafetyCEN/TC 171Heat cost allocationCEN/TC 173BrushwareCEN/TC 176Heat metersCEN/TC 177Prefabricated reinforced components ofautoclaved aerated concrete or light-weightaggregate concrete with open structureCEN/TC 178Paving units and kerbsCEN/TC 182Refrigerating systems, safety andenvironmental requirementsCEN/TC 183Waste managementCEN/TC 186Industrial thermoprocessing - SafetyCEN/TC 188Conveyor beltsCEN/TC 189Geotextiles and geotextile-related productsCEN/TC 190Foundry technologyCEN/TC 193AdhesivesCEN/TC 195Air filters for general air cleaningCEN/TC 196Machines for underground mines - SafetyCEN/TC 201Leather and imitation leather goods andfootwear manufacturing machinery - SafetyCEN/TC 202Foundry machineryCEN/TC 216Chemical disinfectants and antisepticsCEN/TC 217Surfaces for sport areasCEN/TC 219Cathodic protectionCEN/TC 221Metallic shop-fabricated tanksCEN/TC 222Feather and down as filling material for anyarticle, as well as finished articles filled withfeather and downCEN/TC 225Bar codingCEN/TC 226Road equipmentCEN/TC 232Compressors - SafetyCEN/TC 239Rescue systemsCEN/TC 241Gypsum and gypsum based productsCEN/TC 242Safety requirements for passengertransportation by ropeCEN/TC 245Leisure accommodation vehiclesLista mensal ▪ documentos normativos imp DNOR-01-06 51 14 Outubro 2010

DOCUMENTOSnormativosCEN/TC 247Controls for mechanical building servicesPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoCEN/TC 291Self-service shopping trolleysCEN/TC 253Self adhesive tapesCEN/TC 256Railway applicationsCEN/TC 259Medical alarms and signalsCEN/TC 263Secure storage of cash, valuables and datamediaCEN/TC 270Internal combustion enginesCEN/TC 271Surface treatment equipment - SafetyCEN/TC 273LogisticsCEN/TC 274Aircraft ground support equipmentCEN/TC 277Suspended ceilingsCEN/TC 278Road transport and traffic telematicsCEN/TC 279Value management - Value analysis,functional analysisCEN/TC 280Offshore containersCEN/TC 283Precious metals - Application in jewellery andassociated productsCEN/TC 288Execution of special geotechnical worksCEN/TC 289LeatherCEN/TC 293Technical aids for disabled personsCEN/TC 296Tanks for transport of dangerous goodsCEN/TC 297Free-standing industrial chimneysCEN/TC 301Electrically propelled road vehiclesCEN/TC 303Floor screeds and in-situ floorings in buildingsCEN/TC 305Potencially explosive atmospheres - Explosionprevention and protectionCEN/TC 309FootwearCEN/TC 310Advanced manufacturing technologiesCEN/TC 313Industrial centrifugs - Safety requirements(provisional)CEN/TC 314Mastic asphalt for waterproofingCEN/TC 315Spectator accomodationsCEN/TC 317Derivates from coal from pyrolisisCEN/TC 318HydrometryCEN/TC 320Transportation servicesCEN/TC 322Equipment for metal production and rollingmills - Safety requirementsCEN/TC 290Dimensional and geometrical productspecification and verificationCEN/TC 323Raised access floorsCEN/TC 324Castors and wheelsLista mensal ▪ documentos normativos imp DNOR-01-06 52 14 Outubro 2010

DOCUMENTOSnormativosPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoCEN/TC 325Prevention of crime by urban planning andbuilding design (provisional)CEN/TC 326Gas supply for natural gas vehicles (NGV)CEN/TC 328Standard measuring system for cleaningperformanceCEN/TC 329Criteria for describing tourist services inobjective tourist information systemsCEN/TC 332Laboratory equipment (provisional)Lista mensal ▪ documentos normativos imp DNOR-01-06 53 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização6. Projectos de normas e propostas de estudo de novas normas do ComitéEuropeu de Normalização Electrotécnica (CENELEC)Os projectos de normas e propostas de estudo de novas normas estão organizadas por ComitésTécnicos do CENELEC.6.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.BTTF 69-3FprEN 50556:2010Road traffic signal systemsData Limite: 2010-11-19BTTF 135-1FprEN 50558:2010Interoperability specifications of common external powersupply (EPS) for use with data-enabled mobile telephonesData Limite: 2010-10-08SC 9XBFprEN 61881-2:2010Railway applications - Rolling stock equipment -Capacitors for power electronics Part 2: Aluminiumelectrolytic capacitors with non solid electrolyte(IEC 61881-2:201X)Data Limite: 2011-03-04SC 9XBFprEN 61881-3:2010Railway applications - Rolling stock equipment -Capacitors for power electronics Part 3: Electricdouble-layer capacitors(IEC 61881-3:201X)Data Limite: 2011-03-04SC 64BprTR 50480:2010Determination of cross-sectional area of conductors andselection of protecyive devicesData Limite: 2010-11-19SC 205AFprEN 50065-1:2010Signalling on low-voltage electrical installations inthe frequency range 3 kHz to 148,5 kHz Part 1: Generalrequirements, frequency bands and electromagneticdisturbancesData Limite: 2011-02-11SC 31-1FprEN 60079-19:2010Explosive atmospheres Part 19: Equipment repair,overhaul and reclamation(IEC 60079-19:201X)Data Limite: 2010-11-05SR 3FprEN 62023:2010Structuring of technical information and documentation(IEC 62023:201X)Data Limite: 2011-01-14SR 3FprEN 62027:2010Preparation of object lists, including parts lists(IEC 62027:201X)Data Limite: 2011-01-14SR 3FprEN 62507-1:2010Identification systems enabling unambiguous informationinterchange - Requirements Part 1: Principles andmethods(IEC 62507-1:201X)Data Limite: 2010-10-01SR 4FprEN 61362:2010Guide to specification of hydroturbine control systems(IEC 61362: 201X)Data Limite: 2011-02-11SR 4FprEN 62006:2010Hydraulic machines - Acceptance tests of smallhydroelectric installations(IEC 62006:201X)Data Limite: 2010-10-01SR 10FprEN 60296:2010Fluids for electrotechnical applications - Unused mineralinsulating oils for transformers and switchgear(IEC 60296:201X)Data Limite: 2011-01-14SR 10FprEN 60422:2010Mineral insulating oils in electrical equipment -Supervision and maintenance guidance(IEC 60422: 201X)Data Limite: 2011-02-18SR 10FprEN 60475:2010Method of sampling insulating liquids(IEC 60475:201X)Data Limite: 2011-01-14SR 10FprEN 60567:2010Oil-filled electrical equipment - Sampling of gases andanalysis of free and dissolved gases - Guidance(IEC 60567:201X)Data Limite: 2011-01-14SR 15EN 60674-3-1:1998 /prA 1:2010Plastic films for electrical purposes Part 3:Specifications for individual materials Sheet 1: Biaxiallyoriented polypropylene (PP) film for capacitors(IEC 60674-3-1:1998/A1:201X)Data Limite: 2011-01-07Lista mensal ▪ documentos normativos imp DNOR-01-06 54 14 Outubro 2010

DOCUMENTOSnormativosSR 15FprEN 60684-3-283:2010Flexible insulating sleeving Part 3: Specification forindividual types of sleeving Sheet 283: Heat-shrinkable,polyolefin sleeving, for bus-bar insulation(IEC 60684-3-283:201X)Data Limite: 2010-11-19SR 17DFprEN 61439-3:2010Low-voltage switchgear and controlgear assemblies Part3: Distribution boards intended to be operated byordinary persons (DBO)(IEC 61439-3:201X)Data Limite: 2010-12-03SR 23HFprEN 62613-1:2010High-voltage plugs, socket-outlets and ship couplersfor high-voltage shore connection systems(HVSC-SYSTEMS) Part 1: General requirements(IEC 62613-1:201X)Data Limite: 2011-01-07SR 27FprTS 62395-2:2010Electrical resistance trace heating systems forindustrial and commercial applications Part 2:Application guide for system design, installation andmaintenance(IEC/TS 62395-2:2008)Data Limite: 2010-10-08SR 27FprEN 60519-1:2010Safety in electroheat installations Part 1: Generalrequirements(IEC 60519-1:200X)Data Limite: 2010-10-29SR 27FprEN 61307:2010Industrial microwave heating installations - Testmethods for the determination of power output(IEC 61307:201X)Data Limite: 2010-11-26SR 29FprEN 60118-15:2010Electroacoustics - Hearing aids Part 15: Methods forcharacterising signal processing in hearing aids with aspeech-like signal(IEC 60118-15:201X)Data Limite: 2010-10-29SR 29FprEN 61672-1:2010Electroacoustics - Sound level meters Part 1:Specifications(IEC 61672-1:201X)Data Limite: 2011-02-18SR 29FprEN 61672-2:2010Electroacoustics - Sound level meters Part 2: Patternevaluation tests(IEC 61672-2:201X)Data Limite: 2011-02-18SR 29FprEN 61672-3:2010Electroacoustics - Sound level meters Part 3: Periodictests(IEC 61672-3:201X)Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2011-02-18SR 29FprEN 62585:2010Electroacoustics - Methods to determine corrections toobtain the free-field response of a sound level meter(IEC 62585:201X)Data Limite: 2011-02-04SR 32CEN 60127-1:2006 /FprA 1:2010Miniature fuses Part 1: Definitions for miniature fusesand general requirments for miniature fuse-links(IEC 60127-1:2006/A1:201X)Data Limite: 2011-01-07SR 33FprEN 60143-4:2010Series capacitors for power systems Part 4: Thyristorcontrolled series capacitors(IEC 60143-2:200X)Data Limite: 2010-10-22SR 33FprEN 60252-2:2010AC motor capacitors Part 2: Motor start capacitors(IEC 60252-2:201X)Data Limite: 2010-11-19SR 33FprEN 60358-1:2010Coupling capacitors and capacitor dividers Part 1:Common clauses(IEC 60358-1:201X)Data Limite: 2011-01-14SR 34AEN 60357:2003 /FprA 3:2010Tungsten halogen lamps (non-vehicle) - Performancespecifications(IEC 60357:2002/A3:201X)Data Limite: 2010-11-12SR 34AEN 60809:1996 /FprA 5:2010Lamps for road vehicles - Dimensional, electrical andluminous requirements(IEC 60809:1995/A5:201X)Data Limite: 2011-03-04SR 34AEN 62031:2008 /FprA 1:2010LED modules for general lighting - Safety specifications(IEC 62031:2008/A1:201X)Data Limite: 2011-03-04SR 34AFprEN 62639:2010Fluorescent induction lamps - Performance requirements(IEC 62639:201X)Data Limite: 2010-12-03SR 37FprEN 60099-8:2010Surge arresters Part 8: Metal-oxide surge arresters withexternal series gap (EGLA) for overhead transmission anddistribution lines of a.c. systems above 1 kV(IEC 60099-8:201X)Data Limite: 2010-12-03SR 42FprEN 60060-2:2010High-voltage test techniques Part 2: Measuring Systems(IEC 60060-2:200X)Lista mensal ▪ documentos normativos imp DNOR-01-06 55 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-10-29SR 42FprEN 60060-2:2010High-voltage test techniques Part 2: Measuring systems(IEC 60060-2:201X)Data Limite: 2010-11-05SR 46FprEN 62037-1:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 1: General requirements andmeasuring methods(IEC 62037-1:201X)Data Limite: 2010-10-15SR 46FprEN 62037-1:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 1: General requirements andmeasuring methods(IEC 62037-1:201X)Data Limite: 2010-10-15SR 46FprEN 62037-2:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 2: Measurement of passiveintermodulation in coaxial cable assemblies(IEC 62037-2:201X)Data Limite: 2010-10-15SR 46FprEN 62037-2:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 2: Measurement of passiveintermodulation in coaxial cable assemblies(IEC 62037-2:201X)Data Limite: 2010-10-15SR 46FprEN 62037-3:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 3: Measurement of passiveintermodulation in coaxial connectors(IEC 62037-3:201X)Data Limite: 2010-10-15SR 46FprEN 62037-3:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 3: Measurement of passiveintermodulation in coaxial connectors(IEC 62037-3:201X)Data Limite: 2010-10-15SR 46FprEN 62037-4:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 4: Measurement of passiveintermodulation in coaxial cables(IEC 62037-4:201X)Data Limite: 2010-10-15SR 46FprEN 62037-4:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 4: Measurement of passiveintermodulation in coaxial cables(IEC 62037-4:201X)Data Limite: 2010-10-15Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoSR 46FprEN 62037-5:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 5: Measurement of passiveintermodulation in filters(IEC 62037-5:201X)Data Limite: 2010-10-15SR 46FprEN 62037-5:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 5: Measurement of passiveintermodulation in filters(IEC 62037-5:201X)Data Limite: 2010-10-15SR 46FprEN 62037-6:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 6: Measurement of passiveintermodulation in antennas(IEC 62037-6:201X)Data Limite: 2010-10-15SR 46FprEN 62037-6:2010Passive r.f. and microwave devices, intermodulationlevel measurement Part 6: Measurement of passiveintermodulation in antennas(IEC 62037-6:201X)Data Limite: 2010-10-15SR 47FprTR 62258-4:2010Semiconductor die products Part 4: Questionnaire for dieusers and suppliers(IEC/TR 62258-4:201X)Data Limite: 2010-11-05SR 47FprEN 60191-6-5:2010Mechanical standardization of semiconductor devices Part6-5: General rules for the preparation of outlinedrawings of surface mounted semiconductor devicepackage - Design guide for fine-pitch ball grid array(FBGA)(IEC 60191-6-5:201X)Data Limite: 2011-01-28SR 47EFprEN 60747-15:2010Semiconductor devices - Discrete devices Part 15:Isolated power semiconductor devices(IEC 60747-15:201X)Data Limite: 2010-11-26SR 47EFprEN 60747-16-5:2010Semiconductor devices Part 16-5: Microwave integratedcircuits - Oscillators(IEC 60747-16-5:201X)Data Limite: 2011-02-25SR 47FprEN 60749-15:2010Semiconductor devices - Mechanical and climatic testmethods Part 15: Resistance to soldering temperaturefor through-hole mounted devices(IEC 60749-15:200X)Data Limite: 2010-10-15SR 47FprEN 60749-34:2010Semiconductor devices - Mechanical and climatic testLista mensal ▪ documentos normativos imp DNOR-01-06 56 14 Outubro 2010

DOCUMENTOSnormativosmethods Part 34: Power cycling(IEC 60749-34:200X)Data Limite: 2010-10-15SR 47FFprEN 62047-10:2010Semiconductor devices - Micro-electromechanicaldevices Part 10: Micro-pillar compression test for MEMSmaterials(IEC 62047-10:201X)Data Limite: 2011-01-07SR 47FFprEN 62047-12:2010Semiconductor devices - Micro-electromechanical devicesPart 12: Bending fatigue testing method of thin filmmaterials using resonant vibration of MEMS structures(IEC 62047-12:201X)Data Limite: 2011-01-07SR 48BFprEN 60512-16-21:2010Connectors for electronic equipment - Tests andmeasurements Part 16-21:Test 16u: Whisker test via theapplication of external mechanical stresses(IEC 60512-16-21:201X)Data Limite: 2011-02-04SR 48BFprEN 60512-27-100:2010Connectors for electrical equipment - Tests andmeasurements Part 27-100: Signal integrity tests up to500 mhz on 60603-7 series connectors - Tests 27a to 27g(IEC 60512-27-100:201X)Data Limite: 2010-10-08SR 48DFprEN 61587-2:2010Mechanical structures for electronic equipment - Testsfor IEC 60917 and IEC 60297 Part 2: Seismic tests forcabinets and racks(IEC 61587-2:201X)Data Limite: 2011-02-04SR 57FprEN 61850-7-3:2010Communication networks and systems for power utilityautomation Part 7-3: Basic communication structure -Common data classes(IEC 61850-7-3:200X)Data Limite: 2010-10-29SR 65BFprEN 60534-8-3:2010Industrial-process control valves Part 8-3: Noiseconsiderations - Control valve aerodynamic noiseprediction method(IEC 60534-8-3:200X)Data Limite: 2010-10-22SR 65EFprEN 61987-11:2010Industrial-process measurement and control - Datastructures and elements in process equipment cataloguesPart 11: List of properties (LOP) of measuring equipmentfor electronic data exchange - Generic structures(IEC 61987-11:201X)Data Limite: 2011-02-18SR 65EFprEN 62337:2010Commissioning of electrical, instrumentation and controlsystems in the process industry - Specific phases andmilestonesPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização(IEC 62337:201X)Data Limite: 2011-01-07SR 65EFprEN 62381:2010Automation systems in the process industry - FactoryAcceptance Test (FAT), Site Acceptance Test (SAT), andSite Integration Test (SIT)(IEC 62381:201X)Data Limite: 2011-01-07SR 65EFprEN 62382:2010Electrical and instrumentation loop check(IEC 62382:201X)Data Limite: 2011-01-07SR 66FprEN 61010-2-091:2010Safety requirements for electrical equipment formeasurement, control, and laboratory use Part 2-091:Particular requirements for cabinet x-ray systems(IEC 61010-2-091:201X)Data Limite: 2011-01-07SR 80FprEN 61162-1:2010Maritime navigation and radiocommunication equipment andsystems - Digital interfaces Part 1: Single talker andmultiple listeners(IEC 61162-1:201X)Data Limite: 2010-11-05SR 80FprEN 61162-450:2010Maritime navigation and radiocommunication equipment andsystems - Digital interfaces Part 450: Multiple talkersand multiple listeners - Light-weight ship systemsinterconnection(IEC 61162-450:201X)Data Limite: 2010-10-01SR 80FprEN 61993-2:2010Maritime navigation and radiocommunication equipmentand systems - Automatic Identification Systems (AIS)Part 2: Class A shipborne equipment of the universalautomatic identification system (AIS) - Operational andperformance requirements, methods of test and requiredtest results(IEC 61993-2:201X)Data Limite: 2011-01-07SR 80FprEN 62287-1:2010Maritime navigation and radiocommunication equipmentand systems - Class B shipborne equipment of theautomatic identification system (AIS) Part 1:Carrier-sense time division multiple access (CSTDMA)techniques(IEC 62287-1:200X)Data Limite: 2010-10-29SR 86CFprEN 62148-2:2010Fibre optic active components and devices - Package andinterface standards Part 2: SFF 10-pin transceivers(IEC 62148-2:201X)Data Limite: 2010-11-26SR 86CFprEN 62148-3:2010Fibre optic active components and devices - Package andinterface standards Part 3: SFF 20-pin transceiversLista mensal ▪ documentos normativos imp DNOR-01-06 57 14 Outubro 2010

DOCUMENTOSnormativos(IEC 62148-3:200X)Data Limite: 2010-10-29SR 86CFprEN 62150-2:2010Fibre optic active components and devices - Test andmeasurement procedures Part 2: ATM-PON transceivers(IEC 62150-2:201X)Data Limite: 2010-11-19SR 86CFprEN 62343-2:2010Dynamic modules Part 2: Reliability qualificationData Limite: 2010-11-19SR 86CFprEN 62572-3:2010Fibre optic active components and devices - Reliabilitystandards Part 3: Laser modules used fortelecommunication(IEC 62572-3:201X)Data Limite: 2011-02-11SR 90FprEN 61788-15:2010Superconductivity Part 15: Electronic characteristicmeasurements - Intrinsic surface impedance ofsuperconductor films at microwave frequencies(IEC 61788-15:201X)Data Limite: 2010-12-17SR 91FprEN 61249-2-27:2010Materials for printed boards and other interconnectingstructures Part 2-27: Reinforced base materials clad andunclad - Bismaleimide/triazine modifiedwithnon-halogenated epoxide woven glass laminate sheetsof defined flammability (vertical burning test),copper-clad(IEC 61249-2-27:201X)Data Limite: 2011-02-25SR 91FprEN 61249-2-30:2010Materials for printed boards and other interconnectingstructures Part 2-30: Reinforced base materials clad andunclad - Non-halogenated epoxide modified cyanate esterwoven glass laminate of defined flammability (verticalburning test), copper-clad(IEC 61249-2-30:201X)Data Limite: 2011-02-25SR 91FprEN 61249-2-39:2010Materials for printed boards and other interconnectingstructures Part 2-39: Reinforced base materials clad andunclad - Modified epoxide and non-epoxide, woven E-glasslaminated sheets of defined flammability (verticalburning test), copper-clad for lead-free assembly(IEC 61249-2-39:201X)Data Limite: 2011-02-25SR 91FprEN 61249-2-40:2010Materials for printed boards and other interconnectingstructures Part 2-40: Reinforced base materials clad andunclad - High Performance, modified, non-halogenatedepoxide woven E-glass laminated sheets of definedflammability (vertical burning test), copper-clad forlead-free assembly(IEC 61249-2-40:201X)Data Limite: 2011-02-25Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoSR 96FprEN 61558-2-15:2010Safety of transformers, reactors, power supply units andcombinations thereof Part 2-15: Particular Requirementsand tests for isolating transformers for the supply ofmedical locations(IEC 61558-2-15:201X)Data Limite: 2010-12-10SR 100FprEN 61966-12:2010Multimedia systems and equipment - Colour measurementand management Part 12: Metadata for identificationof colour gamut (Gamut ID)(IEC 61966-12:201X)Data Limite: 2010-12-03SR 100FprEN 62516-2:2010Terrestrial digital multimedia broadcasting (T-DMB)receiver Part 2: Interactive data services using BIFS(IEC 62516-2:201X)Data Limite: 2011-01-21SR 100FprEN 62574:2010Audio, video and multimedia systems - General channelassignment of multichannel audio(IEC 62574:201X)Data Limite: 2010-10-08SR 101FprEN 61340-4-4:2010Electrostatics Part 4-4: Standard test methods for specificapplications - Electrostatic classification of flexibleintermediate bulk containers (FIBC)(IEC 61340-4-4:201X)Data Limite: 2011-01-07SR 103FprEN 62553:2010Methods of measurement for digital network - Performancecharacteristics of terrestrial digital multimediatransmission network(IEC 62553:201X)Data Limite: 2011-01-07SR 104FprEN 60068-1:2010Environmental testing Part 1: General and guidance(IEC 60068-1:201X)Data Limite: 2010-10-15SR 104FprEN 60068-2-55:2010Environmental testing Part 2-55: Tests - Test Ee andguidance: Loose cargo testing including bounce(IEC 60068-2-55:201X)Data Limite: 2011-02-04SR 104EN 60068-2-57:2000 /FprA 1:2010Environmental testing Part 2-57: Tests - Test Ff:Vibration - Time-history method(IEC 60068-2-57:1999/A1: 201X)Data Limite: 2011-02-18SR 105FprEN 62282-3-3:2010Fuel cell technologies Part 3-3: Stationary fuel cell powersystems - Installation(IEC 62282-3-3:201X)Data Limite: 2011-01-14Lista mensal ▪ documentos normativos imp DNOR-01-06 58 14 Outubro 2010

DOCUMENTOSnormativosSR 105FprEN 62282-3-200:2010Fuel cell technologies Part 3-200: Stationary fuel cellpower systems - Performance test methods(IEC 62282-3-200:201X)Data Limite: 2011-01-07SR 105FprEN 62282-5-1:2010Fuel cell technologies Part 5-1: Portable fuel cell powersystems - Safety(IEC 62282-5-1:201X)Data Limite: 2011-02-04SR 110FprEN 61988-1:2010Plasma display panels Part 1: Terminology and lettersymbols(IEC 61988-1:201X)Data Limite: 2011-01-07SR 110FprEN 61988-2-1:2010Plasma display panels Part 2-1: Measuring methods -Optical and optoelectrical(IEC 61988-2-1:201X)Data Limite: 2011-01-07SR 110FprEN 61988-2-4:2010Plasma display panels Part 2-4: Measuring methods -Visual quality: Image artifacts(IEC 61988-2-4:201X)Data Limite: 2011-02-25SR 110FprEN 62341-6-2:2010Organic light emitting diode (OLED) displays Part 6-2:Measuring methods of visual quality andambientperformance(IEC 62341-6-2:201X)Data Limite: 2011-02-11SR 112FprEN 60212:2010Standard conditions for use prior to and during the testingof solid electrical insulating materials(IEC 60212:201X)Data Limite: 2010-10-08TC 2prTS 60034-18-42:2010Rotating electrical machines Part 18-42: Qualification andacceptance tests for partial discharge resistant electricalinsulation systems (Type II) used in rotating electricalmachines fed from voltage converters(IEC/TS 60034-18-42:2008)Data Limite: 2010-12-17TC 2prTS 60034-24:2010Rotating electrical machines Part 24: Online detection anddiagnosis of potential failures at the active parts ofrotating electrical machines and of bearing currents -Application guide(IEC/TS 60034-24:2009)Data Limite: 2010-12-17TC 2prTS 60034-27:2010Rotating electrical machines Part 27: Off-line partialdischarge measurements on the stator winding insulationof rotating electrical machines(IEC/TS 60034-27:2006)Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2010-12-17TC 2FprEN 60034-18-34:2010Rotating electrical machines Part 18-34: Functionalevaluation of insulation systems - Test procedures forform-wound windings - Evaluation of thermomechanicalendurance of insulation systems(IEC 60034-18-34:201X)Data Limite: 2011-01-07TC 17BEN 60947-1:2007 /FprA 1:2010Low-voltage switchgear and controlgear Part 1: Generalrules(IEC 60947-1:2007/A1:201X)Data Limite: 2010-11-12TC 17DFprEN 61439-5:2010Low-voltage switchgear and controlgear assemblies Part5: Assemblies for power distribution in public networks(IEC 61439-5:200X)Data Limite: 2010-10-22TC 17DFprEN 61439-6:2010Low-voltage switchgear and controlgear assemblies Part6: Busbar trunking systems (busways)(IEC 61439-6:201X)Data Limite: 2010-10-29TC 17BFprEN 62026-7:2010Low-voltage switchgear and controlgear -Controller-device interfaces (CDIs) Part 7: CompoNet(IEC 62026-7:201X)Data Limite: 2010-11-19TC 17ACFprEN 62271-206:2010High-voltage switchgear and controlgear Part 206:Voltage presence indicating systems(IEC 62271-206:201X)Data Limite: 2010-12-03TC 20FprEN 50363-0:2010Insulating, sheathing and covering materials forlow-voltage energy cables Part 0: General introductionData Limite: 2011-02-04TC 20EN 50363-2-1:2005 /FprA A:2010Insulating, sheathing and covering materials for lowvoltage energy cables Part 2-1: Cross-linked elastomericinsulating compoundsData Limite: 2011-02-04TC 20EN 50363-3:2005 /FprA A:2010Insulating, sheathing and covering materials for lowvoltage energy cables Part 3: PVC insulating compoundsData Limite: 2011-02-04TC 20EN 50363-5:2005 /FprA A:2010Insulating, sheathing and covering materials for lowvoltage energy cables Part 5: Halogen-free, cross-linkedinsulating compoundsData Limite: 2011-02-04Lista mensal ▪ documentos normativos imp DNOR-01-06 59 14 Outubro 2010

DOCUMENTOSnormativosTC 20EN 50363-6:2005 /FprA A:2010Insulating, sheathing and covering materials for lowvoltage energy cables Part 6: Halogen-free,cross-linked sheathing compoundsData Limite: 2011-02-04TC 20EN 50363-8:2005 /FprA A:2010Insulating, sheathing and covering materials for lowvoltage energy cables Part 8: Halogen-free,thermoplastic sheathing compoundsData Limite: 2011-02-04TC 20EN 50395:2005 /FprA A:2010Electrical test methods for low voltage energy cablesData Limite: 2011-02-04TC 20EN 50396:2005 /FprA A:2010Non electrical test methods for low voltage energy cablesData Limite: 2011-02-04TC 21XFprEN 62660-1:2010Secondary batteries for the propulsion of electric roadvehiclesPart 1: Performance testing for lithium-ion cells(IEC 62660-1:201X)Data Limite: 2010-11-19TC 21XFprEN 62660-2:2010Secondary batteries for the propulsion of electric roadvehicles Part 2: Reliability and abuse testing forlithium-ion cells(IEC 62660-2:201X)Data Limite: 2010-11-19TC 22XEN 61800-3:2004 /FprEN 1:2010Adjustable speed electrical power drive systems Part 3:EMC requirements and specific test methods(IEC 61800-3:2004/A1:201X)Data Limite: 2010-10-15TC 23BXFprEN 60669-1:2010Switches for household and similar fixed-electricalinstallations Part 1: General requirements(IEC 60669-1:201X)Data Limite: 2011-01-07TC 23BXEN 60669-1:2010 /FprA A:2010Switches for household and similar fixed-electricalinstallations Part 1: General requirementsData Limite: 2011-01-07TC 23EEN 60898-1:2003 /prA B:2010Electrical accessories - Circuit breakers for overcurrentprotection for household and similar installations Part 1:Circuit-breakers for a.c. operationData Limite: 2011-01-07TC 26AFprEN 60974-6:2010Arc welding equipment Part 6: Limited duty equipment(IEC 60974-6:201X)Data Limite: 2010-10-22Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 31FprEN 60079-35-2:2010Caplights for use in mines susceptible to firedamp Part2: Performance and other safety-related matters(IEC 60079-35-2:201X)Data Limite: 2010-12-17TC 31FprEN 62056-31:2010Electricity metering - Data exchange for meter reading,tariff and load control Part 31: Use of local area networkson twisted pair with carrier signalling(IEC 62056-31:201X)Data Limite: 2010-11-26TC 34ZEN 60061-1:1993 /FprA 46:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 1: Lampcaps(IEC 60061-1:1969/A46:201X)Data Limite: 2011-01-07TC 34ZEN 60061-2:1993 /FprA 43:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 2:Lampholders(IEC 60061-2:1969/A43:201X)Data Limite: 2011-01-07TC 34ZEN 60061-3:1993 /FprA 44:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 3: Gauges(IEC 60061-3:1969/A44:201X)Data Limite: 2011-01-07TC 34ZEN 60061-4:1992 /FprA 14:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 4:Guidelines and general information(IEC 60061-4:1990/A14:201X)Data Limite: 2011-01-07TC 34ZFprEN 60598-2-2:2010Luminaires Part 2-2: Particular requirements - Recessedluminaires(IEC 60598-2-2:201X)Data Limite: 2011-02-04TC 34ZFprEN 62034:2010Automatic test systems for battery powered emergencyescape lighting(IEC 62034:201X)Data Limite: 2010-10-15TC 40XAFprEN 60384-2:2010Fixed capacitors for use in electronic equipment Part 2:Sectional specification: Fixed metallizedpolyethylene-terephthalate film dielectric d.c. capacitors(IEC 60384-2:201X)Data Limite: 2011-02-18TC 40XAFprEN 60384-13:2010Fixed capacitors for use in electronic equipment Part 13:Sectional specification - Fixed polypropylene filmdielectric metal foil d.c. capacitors(IEC 60384-13:201X)Lista mensal ▪ documentos normativos imp DNOR-01-06 60 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2011-02-18TC 40XAFprEN 60384-21:2010Fixed capacitors for use in electronic equipment Part 21:Sectional specification: Fixed surface mount multilayercapacitors of ceramic dielectric, Class 1(IEC 60384-21:201X)Data Limite: 2011-02-18TC 40XAFprEN 60384-22:2010Fixed capacitors for use in electronic equipment Part 22:Sectional specification: Fixed surface mount multilayercapacitors of ceramic dielectric, Class 2(IEC 60384-22:201X)Data Limite: 2011-02-18TC 44XEN 61496-1:2004 /FprA 2:2010Safety of machinery - Electro-sensitive protectiveequipment Part 1: General requirements and tests(IEC 61496-1:2004/A2:201X)Data Limite: 2011-02-18TC 55EN 60851-5:2008 /FprA 1:2010Winding wires - Test methods Part 5: Electricalproperties(IEC 60851-5:2008/A1:201X)Data Limite: 2011-01-21TC 59XFprEN 60350-1:2010Household electric cooking appliances Part 1: Ranges,ovens, steam ovens and grills - Methods for measuringperformance(IEC 60350-1:201X)Data Limite: 2011-02-25TC 59XFprEN 60350-2:2010Household electric cooking appliances Part 2: Hobs -Methods for measuring performance(IEC 60350-2:201X)Data Limite: 2011-02-25TC 59XEN 60456:2005 /FprAB B:2010Clothes washing machines for household use - Methodsfor measuring the performanceData Limite: 2011-02-11TC 59XFprEN 60704-2-10:2010Household and similar electrical appliances - Test codefor the determination of airborne acoustical noise Part2-10: Particular requirements for electric cookingranges, ovens, grills, microwave ovens and anycombination of these(IEC 60704-2-10:201X)Data Limite: 2010-12-03TC 61EN 60335-1:2010 /FprA A:2010Household and similar electrical appliances - Safety Part1: General requirementsData Limite: 2011-02-11TC 61EN 60335-2-14:2006 /FprA A:2010Household and similar electrical appliances - Safety Part2-14: Particular requirements for kitchen machinesData Limite: 2011-01-14Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 61EN 60335-2-15:2002 /FprA A:2010Household and similar electrical appliances - Safety Part2-15: Particular requirements for appliances for heatingliquidsData Limite: 2011-01-14TC 61EN 60335-2-24:2003 /FprA C:2010Household and similar electrical appliances - Safety Part2-24: Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makersData Limite: 2011-01-14TC 61EN 62115:2005 /FprA 2:2010Electric toys - Safety(IEC 62115:2003/A2:201X)Data Limite: 2010-11-12TC 62FprEN 60601-2-3:2010Medical electrical equipment Part 2-3: Particularrequirements for the basic safety and essentialperformance of short-wave therapy equipment(IEC 60601-2-3: 201X)Data Limite: 2011-02-18TC 62FprEN 60601-2-4:2010Medical electrical equipment Part 2-4: Particularrequirements for basic safety and essential performance ofcardiac defibrillators(IEC 60601-2-4:200X)Data Limite: 2010-10-22TC 62FprEN 60601-2-6:2010Medical electrical equipment Part 2-6: Particularrequirements for the basic safety and essentialperformance of microwave therapy equipment(IEC 60601-2-6:201X)Data Limite: 2011-02-18TC 62FprEN 60601-2-8:2010Medical electrical equipment Part 2-8: Particularrequirements for basic safety and essential performanceof therapeutic X-ray equipment operating in the range10 kV to 1 MV(IEC 60601-2-8:200X)Data Limite: 2010-10-15TC 62FprEN 60601-2-10:2010Medical electrical equipment Part 2-10: Particularrequirements for the basic safety and essentialperformance of nerve and muscle stimulators(IEC 60601-2-10: 201X)Data Limite: 2011-02-18TC 62FprEN 60601-2-11:2010Medical electrical equipment Part 2-11: Particularrequirements for basic safety and essentialperformance of gamma beam therapy equipment(IEC 60601-2-11:201X)Data Limite: 2010-10-08TC 62FprEN 60601-2-46:2010Medical electrical equipment Part 2-46: Particularrequirements for basic safety and essential performanceLista mensal ▪ documentos normativos imp DNOR-01-06 61 14 Outubro 2010

DOCUMENTOSnormativosof operating tables(IEC 60601-2-46:201X)Data Limite: 2010-11-26TC 62FprEN 62464-2:2010Magnetic resonance equipment for medical imaging Part 2:Classification criteria for pulse sequences(IEC 62464-2:201X)Data Limite: 2010-10-08TC 62FprEN 80601-2-60:2010Medical electrical equipment Part 2-60: Particularrequirements for basic safety and essential performanceof dental equipment(IEC 80601-2-60:201X)Data Limite: 2010-10-01TC 65CXFprEN 61804-3:2010Function Blocks (FB) for process control Part 3:Electronic Device Description Language (EDDL)(IEC 61804-3:201X)Data Limite: 2010-10-01Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 81XFprEN 62305-3:2010Protection against lightning Part 3: Physical damage tostructures and life hazard(IEC 62305-3:201X)Data Limite: 2010-11-05TC 81XEN 62305-3:2010 /FprA A:2010Protection against lightning Part 3: Physical damage tostructures and life hazardData Limite: 2010-11-05TC 81XFprEN 62305-4:2010Protection against lightning Part 4: Electrical andelectronic systems within structures(IEC 62305-4:201X)Data Limite: 2010-11-05TC 81XEN 62305-4:2010 /FprA A:2010Protection against lightning Part 4: Electrical andelectronic systems within structuresData Limite: 2010-12-03TC 76EN 60825-4:2006 /FprA 2:2010Safety of laser produts Part 4: Laser guards(IEC 60825-4:2006/A2:201X)Data Limite: 2010-10-08TC 79prEN 50132-5-1:2010Alarm systems - CCTV surveillance systems for use insecurity applications Part 5-1: Video transmission -General video transmission performance requirementsData Limite: 2011-03-04TC 79prEN 50136-1:2010Alarm systems - Alarm transmission systems andequipament Part 1: General requirements for alarmtransmission systemsData Limite: 2011-02-18TC 79FprEN 50518-3:2010Monitoring and alarm receiving centre Parte 3:Procedures and requirements for operatingData Limite: 2010-10-29TC 81XFprEN 62305-1:2010Protection against lightning Part 1: General principles(IEC 62305-1:201X)Data Limite: 2010-11-05TC 81XEN 62305-1:2010 /FprA A:2010Protection against lightning Part 1: General principlesData Limite: 2010-12-03TC 81XFprEN 62305-2:2010Protection against lightning Part 2: Risk management(IEC 62305-2:201X)Data Limite: 2010-11-05TC 81XEN 62305-2:2010 /FprA A:2010Protection against lightning Part 2: Risk managementData Limite: 2010-12-03TC 81XFprEN 62561-4:2010Lightning Protection System Components (LPSC) Part 4:Requirements for conductor fasteners(IEC 62561-4:201X)Data Limite: 2010-11-05TC 81XFprEN 62561-7:2010Lightning Protection System Components (LPSC) Part7: Requirements for earthing enhancing compounds(IEC 62561-7:201X)Data Limite: 2011-03-04TC 82FprEN 61701:2010Salt mist corrosion testing of photovoltaic (PV) modules(IEC 61701:201X)Data Limite: 2011-01-14TC 82FprEN 61853-1:2010Photovoltaic (PV) module performance testing andenergy rating Part 1: Irradiance and temperatureperformance measurements and power rating(IEC 61853-1:200X)Data Limite: 2010-11-26TC 82FprEN 61853-2:2010Photovoltaic (PV) module performance testing and energyrating Part 2: Spectral response, incidence angle andmodule operating temperature measurements(IEC 61853-2:201X)Data Limite: 2010-12-17TC 82FprEN 62253:2010Photovoltaic pumping systems - Design qualificationand performance measurements(IEC 62253:201X)Data Limite: 2011-01-21TC 82FprEN 62509:2010Battery charge controllers for photovoltaic systems -Performance and functioning(IEC 62509:201X)Lista mensal ▪ documentos normativos imp DNOR-01-06 62 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-12-03TC 86BXAprEN 50377-16-1:2010Connector sets and interconnect components to be used inoptical fibre communication systems - ProductspecificationsPart 16-1:Type LF3 APC simplex terminated on IEC60793-2-50 category B1.1 and B1.3 single mode fibrewith titanium composite ferrule for Category CData Limite: 2010-12-10TC 86BXAprEN 50411-3-1:2010Fibre organisers and closures to be used in opticalfibre communications systems - Product specificationsPart 3-1: Fibre management system, splice wall box, forcategory C& GData Limite: 2010-12-10TC 86BXAFprEN 50411-6-1:2010Fibre organisers and closures to be used in opticalfibre communications systems - Product specificationsPart 6-1: Unprotected microduct for category S and AData Limite: 2011-02-11TC 86AFprEN 60794-2-10:2010Optical fibre cables Part 2-10: Indoor optical fibrecables - Family specification for simplex and duplexcables(IEC 60794-2-10:201X)Data Limite: 2011-01-07TC 86BXAFprEN 61300-2-6:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement procedures Part2-6: Tests - Tensile strength of coupling mechanism(IEC 61300-2-6:201X)Data Limite: 2010-11-19TC 86BXAFprEN 61300-2-23:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement procedures Part2-23: Tests - Sealing for non-pressurized closuresof fibreoptic devices(IEC 61300-2-23:200X)Data Limite: 2010-10-22TC 86BXAFprEN 61300-3-22:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement proceduresPart 3-22: Examinations and measurements - Ferrulecompression force(IEC 61300-3-22:201X)Data Limite: 2010-11-19TC 86BXAFprEN 61300-3-39:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement procedures Part3-39: Examinations and measurements - Physical contact(PC) optical connector reference plug selection forreturn loss measurements(IEC 61300-3-39:201X)Data Limite: 2010-11-05Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 86BXAFprEN 61300-3-46:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement proceduresPart 3-46: Measurement - Bore diameter for guide pin inMT ferrules(IEC 61300-3-46:201X)Data Limite: 2011-01-07TC 86BXAFprEN 61753-086-6:2010Fibre optic interconnecting devices and passivecomponents performance standard Part 086-6:Non-connectorised single-mode bidirectional 1490 /1550 nm downstream and 1310 nm upstream WWDMdevices for category O - Uncontrolled environment(IEC 61753-086-6:201X)Data Limite: 2010-11-19TC 86BXAFprEN 61753-087-2:2010Fibre optic interconnecting devices and passivecomponents performance standard Part 087-2:Non-connectorised single-mode bidirectional 1310 nmupstream and 1490 nm downstream WWDM devices forcategory C - Controlled environment(IEC 61753-087-2:201X)Data Limite: 2010-11-19TC 86BXAFprEN 61754-20:2010Fibre optic interconnecting devices and passivecomponents - Fibre optic connector interfaces Part 20:Type LC connector family(IEC 61754-20:201X)Data Limite: 2011-01-07TC 88FprEN 61400-25-6:2010Wind turbines Part 25-6: Communications for monitoringand control of wind power plants - Logical node classesand data classes for condition monitoring(IEC 61400-25-6:200X)Data Limite: 2010-10-15TC 97prEN 61821:2010Electrical installations for lighting and beaconing ofaerodromes - Maintenance of aeronautical ground lightingconstant current series circuits(IEC 61821:201X)Data Limite: 2010-11-12TC 108XEN 60065:2002 /FprA C:2010Audio, video and similar electronic apparatus - SafetyrequirementsData Limite: 2010-12-17TC 108XEN 60950-1:2006 /FprA D:2010Information technology equipment - SafetyPart 1: General requirementsData Limite: 2010-12-17TC 111XFprEN 62474:2010Material declaration for products of and for theelectrotechnical industry(IEC 62474:201X)Data Limite: 2011-01-07Lista mensal ▪ documentos normativos imp DNOR-01-06 63 14 Outubro 2010

DOCUMENTOSnormativosTC 111XFprEN 62542:2010Environmental standardization for electrical andelectronic products and systems - Standardization ofenvironmental aspects - Glossary of terms - Proposedhorizontal standard(IEC 62542:201X)Data Limite: 2010-10-15TC 116FprEN 60335-2-92:2010Household and similar electrical appliances - Safety Part2-92: Particular requirements for pedestrian-controlledmains-operated lawn scarifiers and aerators(IEC 60335-2-92:2002 + corrigendum 2003, modif)Data Limite: 2010-12-03TC 116EN 60745-2-3:2007 /FprA 1:2010Hand-held motor-operated electric tools - Safety Part 2-3:Particular requirements for grinders, polishers anddisk-type sanders(IEC 60745-2-3:2006/A1:201X)Data Limite: 2010-10-08TC 116EN 60745-2-3:2007 /FprA C:2010Hand-held motor-operated electric tools - Safety Part 2-3:Particular requirements for grinders, polishers anddisk-type sandersData Limite: 2010-10-08TC 116FprEN 61029-2-1:2010Safety of transportable motor-operated electric toolsParte 2-1: Particular requirements for circular sawbenchesIEC 61029-2-1:1993, modif + A1:1999 + A2:2001)Data Limite: 2011-02-11TC 116FprEN 61029-2-4:2010Safety of transportable motor-operated electric tools Part2-4: Particular requirements for bench grinders(IEC 61029-2-4:1993 + A1:2001, modif)Data Limite: 2010-12-03TC 116FprEN 61029-2-9:2010Safety of transportable motor-operated electric tools Part2-9: Particular requirements for mitre saws(IEC 61029-2-9:1995, modif)Data Limite: 2011-02-11TC 116FprEN 61029-2-11:2010Safety of transportable motor-operated electric toolsPart 2-11: Particular requirements for combined mitreand bench saws(IEC 61029-2-11:2001, modif)Data Limite: 2011-02-25TC 205FprEN 50090-1:2010Home and Building Electronic Systems (HBES) Part 1:Standardization structureData Limite: 2011-01-14TC 206prEN 61937-10:2010Digital audio - Interface for non-linear PCM encodedaudio bitstreams applying IEC 60958 - Part 10:Non-linear PCM bitstreams according to the MPEG-4Audio Lossless Coding (ALS) formatPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização(IEC 61937-10:201X)Data Limite: 2011-01-07TC 209FprEN 60728-3:2010Cable networks for television signals, sound signals andinteractive servicesPart 3: Active wideband equipment for coaxial cablenetworks(IEC 60728-3:200X)Data Limite: 2010-10-22TC 210FprEN 55016-4-2:2010Specification for radio disturbance and immunitymeasuring apparatus and methods Part 4-2: Uncertainties,statistics and limit modelling - Measurementinstrumentation uncertainty(CISPR 16-4-2:201X)Data Limite: 2010-11-05TC 210prEN 55032:2010Electromagnetic compatibility of multimedia equipment- Emission requirementsData Limite: 2010-11-26TC 210FprEN 61000-4-4:2010Electromagnetic compatibility (EMC) Part 4-4: Testingand measurement techniques - Electrical fasttransient/burst immunity test(IEC 61000-4-4:201X)Data Limite: 2011-01-14TC 210FprEN 61000-4-22:2010Electromagnetic compatibility (EMC) Part 4-22:Testing and measurement techniques - Radiatedemissions and immunity measurements in fullyanechoic rooms (FARs)(IEC 61000-4-22:201X)Data Limite: 2010-10-08TC 210EN 61000-6-3:2007 /FprA 1:2010Electromagnetic compatibility (EMC) Part 6-3: Genericstandards - Emission standard for residential,commercial and light-industrial environments(IEC 61000-6-3:2006/A1:201X)Data Limite: 2010-11-05TC 210EN 61000-6-4:2007 /FprA 1:2010Electromagnetic compatibility (EMC) Part 6-4: Genericstandards - Emission standard for industrialenvironments(IEC 61000-6-4:2006/A1:201X)Data Limite: 2010-11-05TC 213EN 50085-1:2005 /prA A:2010Cable trunking systems and cable ducting systems forelectrical installations Part 1: General requirementsData Limite: 2011-01-21TC 213FprEN 62549:2010Articulated systems and flexible systems for cableguiding(IEC 62549:201X)Data Limite: 2010-12-03Lista mensal ▪ documentos normativos imp DNOR-01-06 64 14 Outubro 2010

DOCUMENTOSnormativosTC 215EN 50174-1:2009 /FprEN 1:2010Information technology - Cabling installation Part 1:Installation specification and quality assuranceData Limite: 2010-11-26Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 215EN 50174-2:2009 /FprA 1:2010Information technology - Cabling installation Part 2:Installation planning and practices inside buildingsData Limite: 2010-11-26TC 216FprEN 50543:2010Electronic portable and transportable apparatusdesigned to detect and measure carbon dioxide and/orcarbon monoxide in indoor ambient air - Requirementsand test methodsData Limite: 2010-11-19Lista mensal ▪ documentos normativos imp DNOR-01-06 65 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização6.2 Propostas de anulação de NormasAs propostas de anulação de normas estão organizadas por Comités Técnicos do CENELEC.Para cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 66 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização6.3 Proposta de estudo de novas normas - "Vilamoura Procedures"Lista de propostas de estudo baseadas em novas normas ou em revisão de normas apresentadaspor organismos nacionais membros do CENELEC, com vista à possível elaboração de normaseuropeiasLISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 67 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização6.4 Questionários preliminaresLista dos Documentos de Referência (RD) objecto de Questionários Preliminares (PQ), com vista àsua aceitação como normas europeias.LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 68 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização7. Projectos de Normas e Propostas de Estudo de Novas Normas do ComitéEuropeu de Normalização (CEN) / Comité Europeu de NormalizaçãoElectrotécnica (CENELEC)7.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.TC 1prEN ISO/IEC 17021:2010Conformity assessment - Requirements for bodiesproviding audit and certification of management systems(ISO/IEC/FDIS 17021:2010)Data Limite: 2010-12-16TC 3prEN ISO 80369-1:2010Small bore connectors for liquids and gases in healthcareapplications Part 1: General requirements(ISO/FDIS 80369-1:2010)Data Limite: 2010-11-16TC JWGAIMDprEN 45502-1:2010Active implantable medical devices Part 1: Generalrequirements for safety, marking and information to beprovided by the manufacturerData Limite: 2010-12-17TC JWGFPRprEN 45545-5:2010Railway applications - Fire protection on railway vehiclesPart 5: Fire safety requirements for electrical equipmentincluding that of trolley buses, track guided buses andmagnetic levitation vehiclesData Limite: 2010-10-15Lista mensal ▪ documentos normativos imp DNOR-01-06 69 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização8. Projectos de normas do Instituto Europeu de Normalizaçãopara as Telecomunicações (ETSI)8.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.TC ETSIprEN 300373-1:2010 V1.3.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Maritime mobile transmitters andreceivers for use in the MF and HF bands Part 1:Technical characteristics and methods of measurementData Limite: 2010-11-01TC ETSIprEN 300433-1:2010 V1.2.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Land Mobile Service; Citizens' Band(CB) radio equipment Part 1: Technical characteristicsand methods of measurementData Limite: 2010-11-25TC ETSIprEN 300433-2:2010 V1.2.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Land Mobile Service; Citizens' Band(CB) radio equipment Part 2: Harmonized EN covering theessential requirements of article 3.2 of the R&TTEDirectiveData Limite: 2010-11-25TC ETSIprEN 300609-4:2010 V9.2.0Global System for Mobile communications (GSM) Part 4:Harmonized EN for GSM Repeaters covering the essentialrequirements of article 3.2 of the R&TTE DirectiveData Limite: 2010-10-19TC ETSIprEN 300674-3-1:2010 V3.0.0Intelligent Transport Systems (ITS); Road Transport andTraffic Telematics (RTTT); Dedicated Short RangeCommunications (DSRC) Part 3-1: Technicalcharacteristics and test methods for High Data Rate(HDR) data transmission equipment operating in the 5,8GHz Industrial, Scientific and Medical (ISM) bandData Limite: 2010-10-04TC ETSIprEN 301489-24:2010 V1.5.1Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part24:Specific conditions for IMT-2000 CDMA DirectSpread (UTRA and E-UTRA) for Mobile and portable(UE) radio and ancillary equipmentData Limite: 2010-10-04TC ETSIprEN 301502:2010 V9.2.0Global System for Mobile communications (GSM);Harmonized EN for Base Station Equipment covering theessential requirements of article 3.2 of the R&TTEDirectiveData Limite: 2010-10-19TC ETSIprEN 301908-1:2010 V5.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters and UserEquipment (UE) for IMT-2000 Third-Generation cellularnetworks Part 1: Harmonized EN for IMT-2000,introduction and common requirements, covering theessential requirements of article 3.2 of the R&TTEDirectiveData Limite: 2010-11-09TC ETSIprEN 301908-13:2010 V5.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters and UserEquipment (UE) for IMT-2000 Third-Generation cellularnetworks Part 13: Harmonized EN for IMT-2000, EvolvedUniversal Terrestrial Radio Access (E-UTRA) (UE)covering the essential requirements of article 3.2 of theR&TTE DirectiveData Limite: 2010-11-09TC ETSIprEN 301908-14:2010 V5.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters and UserEquipment (UE) for IMT-2000 Third-Generation cellularnetworks Part 14: Harmonized EN for IMT-2000, EvolvedUniversal Terrestrial Radio Access (E-UTRA) (BS)covering the essential requirements of article 3.2 of theR&TTE DirectiveData Limite: 2010-11-09TC ETSIprEN 302296-2:2010 V1.2.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Transmitting equipment for the digitaltelevision broadcast service, Terrestrial (DVB-T) Part2: Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE DirectiveData Limite: 2010-11-10TC ETSIprEN 302372-1:2010 V1.2.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Equipmentfor Detection and Movement; Tanks Level Probing Radar(TLPR) operating in the frequency bands 5,8 GHz, 10GHz, 25 GHz, 61 GHz and 77 GHz Part 1: Technicalcharacteristics and test methodsData Limite: 2010-12-14TC ETSIprEN 302372-2:2010 V1.2.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Equipmentfor Detection and Movement; Tanks Level Probing Radar(TLPR) operating in the frequency bands 5,8 GHz, 10GHz, 25 GHz, 61 GHz and 77 GHz Part 2: Harmonized ENcovering the essential requirements of article 3.2 of theR&TTE DirectiveData Limite: 2010-12-14Lista mensal ▪ documentos normativos imp DNOR-01-06 70 14 Outubro 2010

DOCUMENTOSnormativosTC ETSIprEN 302500-1:2010 V2.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD) using UltraWideBand (UWB) technology; Location Trackingequipment operating in the frequency range from 6 GHzto 9 GHz Part 1: Technical characteristics and methodsof measurementData Limite: 2010-10-05TC ETSIprEN 302500-2:2010 V2.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD) using UltraWideBand (UWB) technology; Location Tracking equipmentoperating in the frequency range from 6 GHz to 9 GHzPart 2: Harmonized EN covering the essentialrequirements of article 3.2 of the R&TTE DirectiveData Limite: 2010-10-05TC ETSIprEN 302617-2:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Ground-based UHF radio transmitters,receivers and transceivers for the UHF aeronauticalmobile service using amplitude modulation Part 2:Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE DirectiveData Limite: 2010-10-20TC ETSIprEN 302686:2010 V1.0.0Intelligent Transport Systems (ITS);Radiocommunications equipment operating in the 63 GHzto 64 GHz frequency band; Harmonized EN covering theessential requirements of article 3.2 of the R&TTEDirectiveData Limite: 2010-11-25TC ETSIprEN 302729-1:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); LevelProbing Radar (LPR) equipment operating in thefrequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz Part 1:Technical characteristics and test methodsData Limite: 2010-12-06TC ETSIprEN 302729-2:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); LevelProbing Radar (LPR) equipment operating in thefrequency ranges 6 GHz to 8,5 GHz, 24,05 GHz to 26,5GHz, 57 GHz to 64 GHz, 75 GHz to 85 GHz Part 2:Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE DirectiveData Limite: 2010-12-06TC ETSIprEN 302755:2010 V1.2.1Digital Video Broadcasting (DVB); Frame structurechannel coding and modulation for a second generationdigital terrestrial television broadcasting system(DVB-T2)Data Limite: 2011-02-03TC ETSIprEN 302998-1:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Transmitting equipment for terrestrialmobile TV to provide multimedia multicast service PartPublicação oficial do IPQ, enquanto Organismo Nacional de Normalização1: Harmonized EN covering the essential requirementsof article 3.2 of the R&TTE Directive, CommonrequirementsData Limite: 2010-11-09TC ETSIprEN 302998-2:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Transmitting equipment for terrestrialmobile TV to provide multimedia multicast service Part2: Harmonized EN covering the essential requirements ofarticle 3.2 of the R&TTE Directive, Test Arrangementsfor transmitters utilizing OFDM technologyData Limite: 2010-11-09TC ETSIprEN 303213-2:2010 V1.1.1Advanced Surface Movement Guidance and Control System(A-SMGCS) Part 2: Community Specification forapplication under the Single European SkyInteroperability Regulation EC 552/2004 for A-SMGCSLevel 2 including external interfacesData Limite: 2010-10-15TC ETSIprEN 303213-3:2010 V1.1.1Advanced Surface Movement Guidance and Control System(A-SMGCS) Part 3: Community Specification forapplication under the Single European SkyInteroperability Regulation EC 552/2004 for a deployedcooperative sensor including its interfacesData Limite: 2010-10-15TC ETSIprEN 303213-4-1:2010 V1.1.1Advanced Surface Movement Guidance and Control System(A-SMGCS) Part 4: Community Specification forapplication under the Single European SkyInteroperability Regulation EC 552/2004 for a deployednon-cooperative sensor including its interfaces Sub-part1: Generic requirements for non-cooperative sensorData Limite: 2010-10-15TC ETSIprEN 303213-4-2:2010 V1.1.1Advanced Surface Movement Guidance and Control System(A-SMGCS) Part 4: Community Specification forapplication under the Single European SkyInteroperability Regulation EC 552/2004 for a deployednon-cooperative sensor including its interfacesSub-part 2: Specific requirements for a deployedSurface Movement Radar sensorData Limite: 2010-10-15TC ETSIprEN 303214:2010 V1.1.1Data Link Services (DLS) System; CommunitySpecification for application under the Single EuropeanSky Interoperability Regulation EC 552/2004requirements for ground constituents and system testingData Limite: 2010-11-25TC ETSIprEN 305550-1:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Radioequipment to be used in the 40 GHz to 246 GHz frequencyrange Part 1: Technical characteristics and test methodsData Limite: 2010-10-04TC ETSIprEN 305550-2:2010 V1.1.1Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); RadioLista mensal ▪ documentos normativos imp DNOR-01-06 71 14 Outubro 2010

DOCUMENTOSnormativosequipment to be used in the 40 GHz to 246 GHz frequencyrange Part 2: Harmonized EN covering the essentialrequirements of article 3.2 of the R&TTE DirectiveData Limite: 2010-10-04Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoLista mensal ▪ documentos normativos imp DNOR-01-06 72 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização8.2 Propostas de anulação de NormasPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.LISTA VAZIALista mensal ▪ documentos normativos imp DNOR-01-06 73 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização9. Projectos de normas e propostas de estudo de novas Normas de OrganizaçãoInternacional de Normalização (ISO)Os projectos de normas e propostas de estudo de novas normas estão organizadas por ComitésTécnicos da ISO.9.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.DIS 2419:2010Leather Physical and mechanical tests Samplepreparation and conditioningData Limite: 2011-01-26DIS 17076-1:2010Leather Determination of abrasion resistance Part 1:Taber methodData Limite: 2011-01-26DIS 21070:2010Ships and marine technology Marine environmentalprotection Management and handling of shipboardgarbageData Limite: 2011-01-16DIS 26082-1:2010Leather Physical and mechanical test method for thedetermination of soilingPart 1: Rubbing (Martindale) methodData Limite: 2011-01-26TC 4FDIS 5753-2:2010Rolling bearings Internal clearance Part 2: Axial internalclearance for four-point-contact ball bearingsData Limite: 2010-11-08TC 8DIS 24443:2010Determination of sunscreen UVA photoprotection invitroData Limite: 2010-12-22TC 8DIS 28002:2010Security management systems for the supply chainDevelopment of resiliency in the supply chainRequirements with guidance for useData Limite: 2010-12-23TC 8DIS 30005:2010Ships and marine technology Ship recycling managementsystems Information control for hazardous materials inthe manufacturing chain of shipbuilding and shipoperationsData Limite: 2010-10-21TC 10DIS 10628-2:2010Diagrams for the chemical and petrochemical industryPart 2: Graphical symbolsData Limite: 2010-12-15TC 4DIS 12297:2010Rolling bearings Steel cylindrical rollers Dimensions andtolerancesData Limite: 2011-01-13TC 5DIS 13470:2010Trenchless applications of ductile iron pipes systemsProduct design and installationData Limite: 2010-12-22TC 6DIS 534:2010Paper and board Determination of thickness, density andspecific volumeData Limite: 2010-11-24TC 6FDIS 2493-1:2010Paper and board Determination of bending resistancePart 1: Constant ra te of deflectionData Limite: 2010-10-12TC 17FDIS 10893-1:2010Non-destructive testing of steel tubes Part 1: Automatedelectromagnetic testing of seamless and welded (exceptsubmerged arc-welded) steel tubes for the verification ofhydraulic leaktightness instead of the hydrostatic testData Limite: 2010-11-09TC 17FDIS 10893-2:2010Non-destructive testing of steel tubes Part 2: Automatededdy current testing of seamless and welded (exceptsubmerged arc-welded) steel tubes for the detection ofimperfectionsData Limite: 2010-11-09TC 17FDIS 10893-3:2010Non-destructive testing of steel tubes Part 3: Automatedfull peripheral flux leakage testing of seamless andwelded (except submerged arc-welded) ferromagnetic steeltubes for the detection of longitudinal and transverseimperfectionsData Limite: 2010-11-09TC 8FDIS 24409-1:2010TC 17Ships and marine technology Design, location and use ofFDIS 10893-4:2010shipboard safety signs for fire protection, life-savingNon-destructive testing of steel tubes Part 4: Liquidappliances, and means of escapepenetrant inspection of seamless and welded steel tubesPart 1: Design principlesfor the detection of surface imperfectionsData Limite: 2010-10-16Data Limite: 2010-11-09Lista mensal ▪ documentos normativos imp DNOR-01-06 74 14 Outubro 2010

DOCUMENTOSnormativosTC 17FDIS 10893-5:2010Non-destructive testing of steel tubes Part 5: Magneticparticle inspection of seamless and welded ferromagneticsteel tubes for the detection of surface imperfectionsData Limite: 2010-11-09TC 17FDIS 10893-6:2010Non-destructive testing of steel tubes Part 6:Radiographic testing of the weld seam of welded steeltubes for the detection of imperfectionsData Limite: 2010-11-09TC 17FDIS 10893-7:2010Non-destructive testing of steel tubes Part 7: Digitalradiographic testing of the weld seam of welded steeltubes for the detection of imperfectionsData Limite: 2010-11-09TC 17FDIS 10893-8:2010Non-destructive testing of steel tubes Part 8: Automatedultrasonic testing of seamless and welded steel tubes forthe detection of laminar imperfectionsData Limite: 2010-11-09TC 17DIS 10893-9:2010Non-destructive testing of steel tubes Part 9: Automatedultrasonic testing of strips/plates used for themanufacture of welded steel tubes for the detection oflaminar imperfectionsData Limite: 2010-11-09TC 17FDIS 10893-10:2010Non-destructive testing of steel tubes Part 10: Automatedfull peripheral ultrasonic testing of seamless and welded(except submerged arc-welded) steel tubes for thedetection of longitudinal and transverse imperfectionsData Limite: 2010-11-09TC 17FDIS 10893-11:2010Non-destructive testing of steel tubes Part 11: Automatedultrasonic testing of weld seam of welded steel tubes forthe detection of longitudinal and transverse imperfectionsData Limite: 2010-11-09TC 17FDIS 10893-12:2010Non-destructive testing of steel tubes Part 12: Automatedfull peripheral ultrasonic thickness testing of seamlessand welded (except submerged arc-welded) steel tubesData Limite: 2010-11-09TC 17FDIS 15510:2010Stainless steels Chemical compositionData Limite: 2010-10-27TC 20DIS 10502:2010Aerospace Hose assemblies in polytetrafluoroethylene(PTFE) for use up to 232 °C and 10 500 kPa TechnicalspecificationData Limite: 2011-02-02TC 20DIS 10795:2010Space systems Programme managementPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoVocabularyData Limite: 2010-12-13TC 20DIS 11076:2010Aircraft De-icing/anti-icing methods on the groundData Limite: 2010-12-27TC 20DIS 11218:2010Aerospace Cleanliness classification for aeronautical fluiData Limite: 2010-10-12TC 21DIS 7203-3:2010Fire extinguishing media Foam concentrates Part 3:Specification for low expansion foam concentrates for topapplication to water-miscible liquidsData Limite: 2010-11-24TC 21DIS 7240-11:2010Fire detection and alarm systemsPart11: Manual call pointsData Limite: 2010-12-22TC 22DIS 6855-1:2010Mopeds Measurement method for gaseous exhaustemissions and fuel consumptionPart 1: General test requirementsData Limite: 2011-01-19TC 22DIS 6855-2:2010Mopeds Measurement method for gaseous exhaustemissions and fuel consumptionPart 2: Test cycles and specific test conditionsData Limite: 2011-01-19TC 22DIS 6855-3:2010Mopeds Measurement method for gaseous exhaustemissions and fuel consumptionPart 3: Fuel consumption measurement at a constantspeedData Limite: 2011-01-19TC 22DIS 8820-8:2010Road vehicles Fuse-linksPart 8: Fuse-links with bolt-in contacts (Type H and J)with rated voltage of 450 VData Limite: 2011-02-02TC 22DIS 11452-9:2010Road vehicles Component test methods for electricaldisturbances from narrowband radiated electromagneticenergyPart 9: Portable transmittersData Limite: 2010-11-08TC 22DIS 13044-1:2010Battery-electric mopeds and motorcycles PerformancePart 1: Reference energy consumption and rangeData Limite: 2011-01-23TC 22DIS 13064-1:2010Battery-electric mopeds and motorcycles PerformancePart 1: Reference energy consumption and rangeData Limite: 2011-01-23Lista mensal ▪ documentos normativos imp DNOR-01-06 75 14 Outubro 2010

DOCUMENTOSnormativosTC 22DIS 13064-2:2010Battery-electric mopeds and motorcycles PerformancePart 2: Road operating charactericticsData Limite: 2011-01-23TC 22DIS 13207-1:2010Road vehicles LED lamp characteristics for bulbcompatible failure detection Part 1: LED lamps used fordirection indicator and stop lampsData Limite: 2011-02-02TC 22DIS 13209-1:2010Road vehicles Open Test sequence eXchange format(OTX)Part 1: General information and use casesData Limite: 2010-12-13TC 22DIS 15006:2010Road vehicles Ergonomic aspects of transport informationand control systems Specifications for in-vehicleauditory presentationData Limite: 2010-11-03TC 22DIS 15765-1:2010Road vehicles Diagnostic communication overController Area Network (DoCAN)Part 1: General information and use case definitionData Limite: 2010-11-28TC 22DIS 15765-2:2010Road vehicles Diagnostic communication overController Area Network (DoCAN)Part 2: Transport protocol and network layer servicesData Limite: 2010-11-28TC 22DIS 27145-3:2010Road vehicles Implementation of World-WideHarmonized On-Board Diagnostics (WWH-OBD)communication requirements —Part 3: Common message dictionaryData Limite: 2010-12-19TC 23FDIS 4254-11:2010Agricultural machinery Safety Part 11: Pick-up balersData Limite: 2010-11-16TC 23DIS 15081:2010Agricultural equipment Graphical symbols for pressurizedirrigation systemsData Limite: 2011-01-23TC 23DIS 17101-1:2010Agricultural machinery Thrown-object test and acceptancecriteriaPart 1: Rotary mowersData Limite: 2011-01-23TC 23DIS 17101-2:2010Agricultural machinery Thrown-object test and acceptancecriteriaPart 2: Flail mowersData Limite: 2011-01-23Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 27FDIS 23873:2010Hard coal Method for the measurement of the swelling ofhard coal using a dilatometerData Limite: 2010-10-25TC 28FDIS 3405:2010Petroleum products Determination of distillationcharacteristics at atmospheric pressureData Limite: 2010-11-30TC 28FDIS 3987:2010Petroleum products Determination of sulfated ash inlubricating oils and additivesData Limite: 2010-10-20TC 28FDIS 4404-2:2010Petroleum and related productsDetermination of the corrosion resistance offire-resistant hydraulic fluids Part 2:Non-aqueous fluidsData Limite: 2010-10-12TC 28DIS 12152:2010Lubricants, industrial oils and related productsDetermination of the foaming and air release properties ofindustrial gear oils using a spur gear test rig Flenderfoam test procedureData Limite: 2010-12-13TC 28DIS 13032:2010Petroleum products Determination of low sulfur contentof automotive fuels Energy-dispersive X-rayfluorescence spectrometryData Limite: 2010-10-20TC 28FDIS 16591:2010Petroleum products Determination of sulfur contentOxidative microcoulometry methodData Limite: 2010-11-09TC 28FDIS 20843:2010Petroleum and related products Determination of pH offire-resistant fluids within categories HFAE, HFAS andHFCData Limite: 2010-11-02TC 28FDIS 30783-1:2010Petroleum and related products Determination of emulsionstability of fire-resistant fluids Part 1: Fluids incategory HFAEData Limite: 2010-11-09TC 29DIS 3364:2010Indexable hardmetal (carbide) inserts with roundedcorners, with cylindrical fixing hole DimensionsData Limite: 2010-11-30TC 30FDIS 17089-1:2010Measurement of fluid flow in closed conduits Ultrasonicmeters for gasPart 1: Meters for custody transfer and allocationmeasurementLista mensal ▪ documentos normativos imp DNOR-01-06 76 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-10-16TC 31FDIS 4249-3:2010Motorcycle tyres and rims (code-designated series)Part 3: RimsData Limite: 2010-10-04TC 31FDIS 5775-1:2010Bicycle tyres and rimsPart 1: Tyre designations and dimensionsData Limite: 2010-12-12TC 33DIS 14719:2010Chemical analysis of refractory material glass andglazes Determination of Fe2+ and Fe3+ by the spectralphotometric method with 1-10 phenantrolineData Limite: 2011-01-26TC 34FDIS 520:2010Cereals and pulses Determination of the mass of 1000grainsData Limite: 2010-10-12TC 34FDIS 6731:2010Milk, cream and evaporated milk Determination of totalsolids content (Reference method)Data Limite: 2010-10-23TC 34FDIS 6734:2010Sweetened condensed milkDetermination of total solids content (Referencemethod)Data Limite: 2010-10-23TC 34ISO 6887-4:2003 /DAM 1:2010Welding consumables Wire electrodes and weld depositsfor gas shielded metal arc welding of non alloy and finegrain steels ClassificationData Limite: 2010-12-15TC 34DIS 7970:2010Wheat (Triticum aestivum L.) SpecificationData Limite: 2010-12-28TC 34DIS 11746:2010Rice Determination of biometric characteristics ofkernelsData Limite: 2011-01-26TC 34DIS 13082:2010Millk and milk products Determination of the lipaseactivity of pregastric lipase preparationData Limite: 2010-12-12TC 34DIS 15163:2010Milk and milk products Calf rennet and adult bovinerennet Determination by chromatography of chymosin andbovine pepsinData Limite: 2010-10-21TC 34DIS 17932:2010Vegetable oils Determination of the deterioration ofPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãobleachability index (DOBI) and carotene contentData Limite: 2010-12-15TC 35DIS 2431:2010Paints and varnishes Determination of flow time by useof flow cupsData Limite: 2010-11-17TC 35DIS 20566:2010Paints and varnishes Determination of the scratchresistance of a coating system using a laboratory-scalecarwashData Limite: 2010-12-29TC 37FDIS 24615:2010Language resource managementSyntactic annotation framework (SynAFData Limite: 2010-10-02TC 37DIS 24617-2:2010Language resource management Semantic annotationframework (SemAF)Part 2: Dialogue actsData Limite: 2010-12-30TC 38FDIS 30023:2010Textiles Qualification symbols for labelling workwear tobe industrially launderedData Limite: 2010-10-20TC 43DIS 3745:2010Acoustics Determination of sound power levels and soundenergy levels of noise sources using sound pressurePrecision methods for anechoic test rooms andhemi-anechoic test roomsData Limite: 2010-10-06TC 43FDIS 3746:2010Acoustics Determination of sound power levels and soundenergy levels of noise sources using sound pressureSurvey method using an enveloping measurement surfaceover a reflecting planeData Limite: 2010-10-12TC 43FDIS 3747:2010Acoustics Determination of sound power levels and soundenergy levels of noise sources using sound pressureEngineering/survey methods for use in situ in areverberant environmentData Limite: 2010-10-05TC 44FDIS 11666:2010Non-destructive testing of welds Ultrasonic testing ofwelded joints Acceptance levelsData Limite: 2010-12-16TC 44DIS 15609-5:2010Specification and qualification of welding procedures formetallic materials Welding procedure specificationPart 5: Resistance weldingData Limite: 2010-11-03Lista mensal ▪ documentos normativos imp DNOR-01-06 77 14 Outubro 2010

DOCUMENTOSnormativosTC 44DIS 15615:2010Gas welding equipment Acetylene manifold systems forwelding, cutting and allied processes Safety requirementsin high-pressure devicesData Limite: 2011-01-05TC 44FDIS 17640:2010Non-destructive testing of welds Ultrasonic testingTechniques, testing levels, and assessmentData Limite: 2010-10-26TC 44FDIS 18274:2010Welding consumables Wire and strip electrodes, wires androds for fusion welding of nickel and nickel alloysClassificationData Limite: 2010-11-16TC 45ISO 1125:1999 /DAM 1:2010Rubber compounding ingredients Carbon blackDetermination of ashAmendment 1Data Limite: 2010-12-12TC 45DIS 6072:2010Rubber Compatibility between hydraulic fluids andstandard elastomeric materialsData Limite: 2010-12-30TC 45DIS 7270-2:2010Rubber Analysis by pyrolytic gas-chromatographicmethods Part 2: Determination ofstyrene/butadiene/isoprene ratioData Limite: 2010-10-09TC 45DIS 8332:2010Rubber compounding ingredients SulfurMethods of testData Limite: 2011-01-27TC 45FDIS 8942:2010Rubber compounding ingredientsCarbon black Determination of individual pelletcrushing strengthData Limite: 2010-10-05TC 45DIS 28017:2010Rubber hoses and hose assemblies, wire or textilereinforced, for dredging applications SpecificationData Limite: 2010-11-03TC 45FDIS 32100:2010Rubber- or plastics-coated fabrics Physical andmechanical tests Determination of flex resistance by theflexometer methodData Limite: 2010-11-09TC 46FDIS 16175-1:2010Information and documentation - Principles andfunctional requirements for records in electronic officeenvironments Part 1: Overview and statement ofprinciplesData Limite: 2010-11-15Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 46DIS 16175-2:2010Information and documentation - Principles and functionalrequirements for records in electronic officeenvironments Part 2: Guidelines and functionalrequirements for records in electronic officeenvironmentsData Limite: 2010-10-16TC 46FDIS 16175-3:2010Information and documentation - Principles andfunctional requirements for records in electronic officeenvironmentsPart 3: Guidelines and functional requirements forrecords in business systemsData Limite: 2010-11-15TC 46FDIS 26324:2010Information and documentation - Digital objectidentifier systemData Limite: 2010-11-15TC 46DIS 27730:2010Information and documentation - International standardcollection identifier (ISCI)Data Limite: 2010-10-11TC 46DIS 30300:2010Information and documentation - Management system forrecords - Fundamentals and vocabularyData Limite: 2010-10-21TC 46DIS 30301:2010Information and documentation - Management system forrecords - RequirementsData Limite: 2010-10-21TC 51FDIS 178:2010Plastics Determination of flexural propertiesData Limite: 2010-11-16TC 54FDIS 10869:2010Oil of fir needle, Siberian (Abies sibirica Ledeb.)Data Limite: 2010-10-20TC 58FDIS 11114-3:2010Transportable gas cylinders Compatibility of cylinder andvalve materials with gas contents Part 3: Autogenousignition test for non-metallic materials in oxygenatmosphereData Limite: 2010-11-16TC 59DIS 9836:2010Performance standards in building Definition andcalculation of area and space indicatorsData Limite: 2011-01-02TC 59DIS 15686-2:2010Buildings and constructed assets Service life planningPart 2: Service life prediction proceduresData Limite: 2010-12-20Lista mensal ▪ documentos normativos imp DNOR-01-06 78 14 Outubro 2010

DOCUMENTOSnormativosTC 59DIS 15928-5:2010Houses Description of performancePart 5:Energy usageData Limite: 2010-10-04TC 61FDIS 1874-1:2010Plastics Polyamide (PA) moulding and extrusion materialsPart 1: Designation system and basis for specificationData Limite: 2010-10-12TC 61ISO 1874-2:2006 /FDAM 1:2010Plastics Polyamide (PA) moulding and extrusion materialsPart 2: Preparation of test specimens and determination ofproperties - Amendment 1: Laser sintering of specimensData Limite: 2010-10-12TC 61DIS 3598:2010Textile glass Yarns Basis for a specificationData Limite: 2010-12-19TC 61FDIS 4611:2010Plastics Determination of the effects of exposure to dampheat, water spray and salt mistData Limite: 2010-11-16TC 61FDIS 10352:2010Fibre-reinforced plastics Moulding compounds andprepregs Determination of mass per unit areaData Limite: 2010-11-09TC 61FDIS 11337:2010Plastics Polyamides Determination of e-caprolactamand w-laurolactam by gas chromatographyData Limite: 2010-11-09TC 61DIS 11833-1:2010Plastics Unplasticized poly(vinyl chloride) sheets -Types, dimensions and characteristics Part 1: Sheets ofthickness not less than 1 mmData Limite: 2010-11-03TC 61DIS 26842-1:2010Adhesives Test methods for the evaluation and selectionof adhesives for indoor wood productsPart 1: Resistance to delamination in non-severeenvironmentsData Limite: 2011-01-16TC 61DIS 26842-2:2010Adhesives Test methods for the evaluation and selectionof adhesives for indoor wood products Part 2: Resistanceto delamination in severe environmentsData Limite: 2011-01-16TC 61DIS 30012:2010Carbon-fibre-reinforced plastics Determination of thesize and aspect ratio of crushed objectsData Limite: 2011-01-10TC 67FDIS 11960:2010Petroleum and natural gas industries Steel pipes for useas casing or tubing for wellsPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2010-11-16TC 67DIS 12211:2010Petroleum, petrochemical and natural gas industriesSpiral plate heat exchangersData Limite: 2010-12-08TC 67ISO 13500:2008 /FDAM 1:2010Petroleum and natural gas industries Drilling fluidmaterials Specifications and tests - Amendment 1: Barite4,1Data Limite: 2010-10-12TC 67FDIS 13628-4:2010Petroleum and natural gas industries Design andoperation of subsea production systems Part 4: Subseawellhead and tree equipmentData Limite: 2010-11-16TC 67DIS 13679:2010Petroleum and natural gas industries Procedures fortesting casing and tubing connectionsData Limite: 2010-11-12TC 67DIS 15589-2:2010Petroleum and natural gas industries Cathodic protectionof pipeline transportation systemsPart 2: Offshore pipelinesData Limite: 2011-01-23TC 67DIS 19901-3:2010Petroleum and natural gas industries Specificrequirements for offshore structures Part 3: TopsidesstructureData Limite: 2010-10-19TC 67FDIS 19906:2010Petroleum and natural gas industries Arctic offshorestructuresData Limite: 2010-11-16TC 67DIS 23936-2:2010Petroleum, petrochemical and natural gas industriesNon-metallic materials in contact with media related tooil and gas production Part 2: ElastomersData Limite: 2010-10-20TC 67FDIS 28460:2010Petroleum and natural gas industries Installation andequipment for liquefied natural gas Ship-to-shoreinterface and port operationsData Limite: 2010-11-09TC 68DIS 20022-1:2010Financial services Universal financial industry messageschemePart 1: MetamodelData Limite: 2011-01-30TC 68DIS 20022-2:2010Financial services Universal financial industry messageschemePart 2: UML profileLista mensal ▪ documentos normativos imp DNOR-01-06 79 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2011-01-30TC 68DIS 20022-3:2010Financial services Universal financial industry messageschemePart 3: ModellingData Limite: 2011-01-30TC 68DIS 20022-4:2010Financial services Universal financial industry messageschemePart 4: XML Schema generationData Limite: 2011-01-30TC 68DIS 20022-5:2010Financial services Universal financial industry messageschemePart 5: Reverse engineeringData Limite: 2011-01-30TC 68DIS 20022-7:2010Financial services Universal financial industry messageschemePart 7: RegistrationData Limite: 2011-01-30TC 68DIS 20022-8:2010Financial services Universal financial industry messageschemePart 8: ASN.1 generationData Limite: 2011-01-30TC 69ISO 2859-1:1999 /DAM 1:2010Sampling procedures for inspection by attributes Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspectionAMENDMENT 1Data Limite: 2011-01-06TC 69DIS 3951-4:2010Sampling procedures for inspection by variablesPart 4: Procedures for assessment of declared qualitylevelsData Limite: 2010-11-03TC 69DIS 7870-3:2010Control chartsPart 3: Acceptance control chartsData Limite: 2011-01-11TC 69DIS 13053-1:2010Quantitative methods in process improvement Six SigmaPart 1: DMAIC methodologyData Limite: 2010-10-21TC 69DIS 13053-2:2010Quantitative methods in process improvement Six SigmaPart 2: Tools and techniquesData Limite: 2010-10-21TC 86DIS 13971:2010Refrigeration systems and heat pumps Flexible pipeelements, vibration isolators, expansion joints andPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãonon-metallic tubes Requirements and classificationData Limite: 2011-01-31TC 89FDIS 16893-2:2010Wood-based panels ParticleboardPart 2: RequirementsData Limite: 2010-10-02TC 89FDIS 16895-2:2010Wood-based panels Dry-process fibreboardPart 2: RequirementsData Limite: 2010-10-02TC 92DIS 5660-4:2010Reaction to fire tests Heat release, smoke production andmass loss ratePart 4: Measurement of heat release for determination oflow levels of combustibilityData Limite: 2011-01-11TC 92FDIS 29473:2010Fire tests Uncertainty of measurements in fire testsData Limite: 2010-11-07TC 94DIS 20471:2010High-visibility warning clothing for professional useTest methods and requirementsData Limite: 2011-01-12TC 102DIS 3087:2010Iron ores Determination of the moisture content of a lotData Limite: 2011-02-07TC 104DIS 18186:2010Freight containers RFID cargo shipment tag systemData Limite: 2010-12-22TC 106DIS 6875:2010Dental patient chairData Limite: 2010-10-27TC 106DIS 6876:2010Dentistry Root canal sealing materialsData Limite: 2011-01-26TC 106DIS 7494-1:2010Dentistry Dental units Part 1: General requirements andtest methodsData Limite: 2010-10-27TC 106DIS 9693-1:2010Dentistry Compatibility testing Part 1: Metal-ceramicsystemsData Limite: 2010-12-08TC 107FDIS 3613:2010Metallic and other inorganic coatings Chromateconversion coatings on zinc, cadmium, aluminium-zincalloys and zinc-aluminium alloys Test methodsData Limite: 2010-11-02Lista mensal ▪ documentos normativos imp DNOR-01-06 80 14 Outubro 2010

DOCUMENTOSnormativosTC 107FDIS 4534:2010Vitreous and porcelain enamels Determination of fluiditybehaviour Fusion flow testData Limite: 2010-11-16TC 107FDIS 12690:2010Metallic and other inorganic coatings Thermal spraycoordination Tasks and responsibilitiesData Limite: 2010-11-16TC 107DIS 13123:2010Metallic and other inorganic coatings Test method ofcyclic heating for thermal-barrier coatings undertemperature gradientData Limite: 2010-12-22TC 107DIS 14921:2010Thermal spraying Procedures for the application ofthermally sprayed coatings for engineering componentsData Limite: 2010-11-09TC 108DIS 21940-14:2010Mechanical vibration Rotor balancingPart14: Balance quality requirements of rigid andflexible rotors - Balance errorsData Limite: 2010-12-03TC 108DIS 21940-23:2010Mechanical vibration Rotor balancing—Part23: Balancing machines - Enclosures and otherprotective measures for the measuring stationData Limite: 2011-02-03TC 111DIS 3076:2010Round steel short link chains for general lifting purposesMedium tolerance sling chains for chain slings Grade 8Data Limite: 2011-02-06TC 113FDIS 1100-2:2010Hydrometry Measurement of liquid flow in openchannelsPart 2: Determination of the stage-discharge relationshipData Limite: 2010-10-23TC 113FDIS 2425:2010Hydrometry Measurement of liquid flow in open channelsunder tidal conditionsData Limite: 2010-10-05TC 117ISO 12499:1999 /DAM 1:2010Industrial fans Mechanical safety of fans GuardingAMENDMENT 1Data Limite: 2011-01-19TC 117ISO 13347-1:2004 /DAM 1:2010Industrial fans Determination of fan sound power levelsunder standardized laboratory conditionsPart 1: General overviewAMENDMENT 1Data Limite: 2010-10-27Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 117ISO 13347-3:2004 /FDAM 1:2010Industrial fans Determination of fan sound power levelsunder standardized laboratory conditionsPart 3: Enveloping surface methodsAMENDMENT 1Data Limite: 2010-10-27TC 118FDIS 28927-4:2010Hand-held portable power tools Test methods forevaluation of vibration emission Part 4: Straight grindersData Limite: 2010-11-16TC 118DIS 28927-12:2010Hand-held portable power tools Test methods forevaluation of vibration emission Part 12: Die grindersData Limite: 2011-01-05TC 122FDIS 22742:2010Packaging Linear bar code and two-dimensional symbolsfor product packagingData Limite: 2010-10-26TC 127FDIS 15818:2010Earth-moving machinery Lifting and tying-downattachment pointsPerformance requirementsData Limite: 2010-10-24TC 130DIS 12647-8:2010Graphic technology Process control for the production ofhalf-tone colour separations, proof and production printsPart 8: Validation print processes working directly fromdigital dataData Limite: 2010-11-04TC 130FDIS 15076-1:2010Image technology colour managementArchitecture, profile format and data structurePart 1: Based on ICC.1:2004-10Data Limite: 2010-10-18TC 131FDIS 4413:2010Hydraulic fluid power General rules and safetyrequirements for systems and their componentsData Limite: 2010-10-05TC 131FDIS 4414:2010Pneumatic fluid power General rules and safetyrequirements for systems and their componentsData Limite: 2010-10-05TC 131DIS 16873:2010Hydraulic fluid power Pressure switches MountingsurfacesData Limite: 2011-01-11TC 135DIS 12707:2010Non-destructive testing Terminology Terms used inmagnetic particle testingData Limite: 2011-01-25Lista mensal ▪ documentos normativos imp DNOR-01-06 81 14 Outubro 2010

DOCUMENTOSnormativosTC 135DIS 16371-1:2010Non-destructive testing Industrial computed radiographywith storage phosphor imaging platesPart 1: Classification of systemsData Limite: 2011-01-05TC 138DIS 10147:2010Pipes and fittings made of crosslinked polyethylene(PE-X) Estimation of the degree of crosslinking by determinationof the gel contentData Limite: 2011-01-17TC 138FDIS 14531-3:2010Plastics pipes and fittings Crosslinked polyethylene(PE-X) pipe systems for the conveyance of gaseous fuels -Metric series - SpecificationsPart 3: Fittings for mechanical jointing (includingPE-X/metal transitions)Data Limite: 2010-11-07TC 138DIS 15874-1:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 1: GeneralData Limite: 2010-12-29TC 138DIS 15874-2:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 2: PipesData Limite: 2010-12-29Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoPart 5: Fitness for purpose of the system - Amendment 1Data Limite: 2010-10-05TC 145ISO 7010:2003 /FDAM 71:2010Graphical symbols Safety colours and safety signs -Safety signs used in workplaces and public areasAMENDMENT 71: Safety sign P025: Do not use thisincomplete scaffoldData Limite: 2010-11-02TC 145ISO 7010:2003 /FDAM 72:2010Graphical symbols Safety colours and safety signs -Safety signs used in workplaces and public areasAMENDMENT 72: Safety sign P026: Do not use thisdevice in a bathtub, shower or water-filled reservoirData Limite: 2010-11-02TC 145ISO 7010:2003 /FDAM 73:2010Graphical symbols Safety colours and safety signs -Safety signs used in workplaces and public areasAMENDMENT 73: Safety sign P027: Do not use this liftfor peopleData Limite: 2010-11-02TC 145ISO 7010:2003 /FDAM 74:2010Graphical symbols Safety colours and safety signs -Safety signs used in workplaces and public areasAMENDMENT 74: Safety sign P028: Do not wearglovesData Limite: 2010-11-02TC 138DIS 15874-3:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 3: FittingsData Limite: 2010-12-29TC 138DIS 15874-5:2010Plastics piping systems for hot and cold waterinstallations Polypropylene (PP) Part 5: Fitness forpurpose of the systemData Limite: 2010-12-29TC 138ISO 15877-1:2009 /FDAM 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)Part 1: General - Amendment 1Data Limite: 2010-10-05TC 138ISO 15877-2:2009 /FDAM 1:2010Plastics piping systems for hot and cold waterinstallationsChlorinated poly(vinyl chloride) (PVC-C) Part 2: Pipes- Amendment 1Data Limite: 2010-10-05TC 138ISO 15877-3:2009 /FDAM 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)Part 3: Fittings - Amendment 1Data Limite: 2010-10-05TC 138ISO 15877-5:2009 /FDAM 1:2010Plastics piping systems for hot and cold waterinstallations Chlorinated poly(vinyl chloride) (PVC-C)TC 145FDIS 28564-1:2010Public information guidance systems Part 1: Designprinciples and element requirements for location plans,maps and diagramsData Limite: 2010-10-03TC 146FDIS 11771:2010Air quality Determination of time-averaged massemissions and emission factors General approachData Limite: 2010-10-26TC 146DIS 16000-4:2010Indoor airPart 4: Determination of formaldehyde — Diffusivesampling methodData Limite: 2010-12-30TC 146DIS 16000-19:2010Indoor airPart 19: Sampling strategy for mouldsData Limite: 2010-11-28TC 146DIS 16000-26:2010Indoor air Part 26: Sampling strategy for carbon dioxide(CO2)Data Limite: 2011-01-26TC 146DIS 16000-28:2010Indoor air Part 28: Determination of odour emissionsfrom building products using test chambersData Limite: 2010-11-28Lista mensal ▪ documentos normativos imp DNOR-01-06 82 14 Outubro 2010

DOCUMENTOSnormativosTC 146DIS 28902:2010Air quality Environmental meteorology Ground-basedremote sensing of visual rangeData Limite: 2011-01-23TC 147DIS 5814:2010Water quality Determination of dissolved oxygenElectrochemical probe methodData Limite: 2010-10-20TC 147DIS 8692:2010Water quality Fresh-water algal growth inhibition testwith unicellular green algaeData Limite: 2011-01-12TC 147DIS 14380:2010Water quality Determination of the acute toxicity toThamnocephalus platyurus (Crustacea, Anostraca)Data Limite: 2011-02-02TC 150DIS 14117:2010Active implantable medical devices Electromagneticcompatibility EMC test protocols for implantable cardiacpacemakers, implantable cardioverter defibrillators andcardiac resynchronization devicesData Limite: 2010-12-26TC 157FDIS 29941:2010Condoms Determination of nitrosamines migrating fromnatural rubber latex condomsData Limite: 2010-11-03TC 159FDIS 9241-129:2010Ergonomics of human-system interaction Part 129:Guidance on software individualizationData Limite: 2010-10-19TC 159DIS 9241-143:2010Ergonomics of human-system interaction Part 143:Form-based dialoguesData Limite: 2010-12-15TC 163DIS 12569:2010Thermal insulation in buildings Determination of airchange in buildings Tracer gas dilution methodData Limite: 2010-12-08TC 163DIS 16534:2010Thermal insulating products for building applicationsDetermination of compressive creepData Limite: 2011-01-10TC 163DIS 16535:2010Thermal insulating products for building applicationsDetermination of long term water absorption byimmersionData Limite: 2011-01-10TC 163DIS 16536:2010Thermal insulating products for building applicationsDetermination of long term water absorption bydiffusionPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoData Limite: 2011-01-10TC 163DIS 16537:2010Thermal insulating products for building applicationsDetermination of shear behaviourData Limite: 2011-01-03TC 163DIS 16544:2010Thermal insulating products for building applicationsConditioning to moisture equilibrium under specifiedtemperature and humidity conditionsData Limite: 2011-01-10TC 163DIS 16545:2010Thermal insulating products for building applicationsDetermination of behaviour under cyclic loadingData Limite: 2011-01-10TC 163DIS 16546:2010Thermal insulating products for building applicationsDetermination of freeze-thaw resistanceData Limite: 2011-01-10TC 171DIS 19005-2:2010Document management - Electronic document file formatfor long-term preservation Part 2: Use of ISO 32000-1(PDF/A)Data Limite: 2010-10-18TC 172FDIS 8624:2010Ophthalmic optics Spectacle frames Measuring systemand terminologyData Limite: 2010-11-30TC 172DIS 11252:2010Lasers and laser-related equipment Laser deviceMinimum requirements for documentationData Limite: 2010-12-29TC 172FDIS 11986:2010Ophthalmic optics Contact lenses and contact lens careproducts Determination of preservative uptake andreleaseData Limite: 2010-10-05TC 172DIS 12870:2010Ophthalmic optics Spectacle frames Requirements andtest methodsData Limite: 2010-12-29TC 173DIS 12505:2010Skin barrier for ostomy aids Test methodsData Limite: 2010-12-26TC 176DIS 19011:2010Guidelines for auditing management systemsData Limite: 2010-11-17TC 178DIS 18738-2:2010Measurement of ride qualityPart 2: Escalators and moving walksData Limite: 2011-01-11Lista mensal ▪ documentos normativos imp DNOR-01-06 83 14 Outubro 2010

DOCUMENTOSnormativosTC 188DIS 12217-2:2010Small craft Stability and buoyancy assessment andcategorization Part 2: Sailing boats of hull length greaterthan or equal to 6 mData Limite: 2010-10-06TC 188DIS 12217-3:2010Small craft Stability and buoyancy assessment andcategorization Part 3: Boats of hull length less than 6 mData Limite: 2010-10-06TC 188DIS 13501:2010Petroleum and natural gas industries Drilling fluidsProcessing systems evaluationData Limite: 2010-10-06TC 188DIS 15027-1:2010Immersion suits Part 1: Constant wear suits,requirements including safetyData Limite: 2010-11-03TC 188DIS 15027-2:2010Immersion suits Part 2: Abandonment suits, requirementsincluding safetyData Limite: 2010-11-03TC 188DIS 15027-3:2010Immersion suits Part 3: Test methodsData Limite: 2010-11-03TC 190DIS 10930:2010Soil quality Measurement of the stability of soilaggregates subjected to the action of waterData Limite: 2011-01-06TC 190DIS 12404:2010Soil quality Guidance on the selection and applicationof screening methodsData Limite: 2011-01-05TC 190DIS 15009:2010Soil quality Gas chromatographic determination of thecontent of volatile aromatic hydrocarbons, naphthaleneand volatile halogenated hydrocarbons Purge-and-trapmethod with thermal desorptionData Limite: 2010-12-22TC 194DIS 10993-12:2010Biological evaluation of medical devices Part 12: Samplepreparation and reference materialsData Limite: 2010-10-06TC 194FDIS 14155:2010Clinical investigation of medical devices for humansubjects Good clinical practiceData Limite: 2010-11-09TC 199DIS 13849-2:2010Safety of machinery Safety-related parts of controlsystems Part 2: ValidationData Limite: 2010-10-27Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 201DIS 14701:2010Surface chemical analysis X-ray photoelectronspectroscopy Measurement of silicon oxide thicknessData Limite: 2011-02-07TC 201DIS 16242:2010Surface chemical analysis Recording and reporting datain Auger electron spectroscopy (AES)Data Limite: 2010-12-26TC 201DIS 16243:2010Surface chemical analysis Recording and reporting datain X-ray photoelectron spectroscopy (XPS)Data Limite: 2010-12-26TC 204FDIS 21216:2010Intelligent transport systems Wireless communicationsCALM using millimetre communications . Air interfaceData Limite: 2010-10-26TC 205DIS 11885-3:2010Building environment design Standards for the design,construction and operation of radiant heating andcooling systemsPart3: Design and dimensioningData Limite: 2011-01-23TC 205FDIS 16484-5:2010Building automation and control systems Part 5: Datacommunication protocolData Limite: 2010-10-05TC 206DIS 28704:2010Fine ceramics (advanced ceramics, advanced technicalceramics) Test method for cyclic bending fatigue ofporous ceramics at room temperatureData Limite: 2010-12-20TC 207FDIS 14005:2010Environmental management systems Guidelines for thephased implementation of an environmental managementsystem, including the use of environmental performanceevaluationData Limite: 2010-10-26TC 211DIS 19145:2010Geographic information Registry of representations ofgeographic point locationData Limite: 2011-02-02TC 211DIS 19156:2010Geographic information Observations and measurementsData Limite: 2010-11-04TC 212DIS 19001:2010In vitro diagnostic medical devices Information suppliedby the manufacturer with in vitro diagnostic reagents forstaining in biologyData Limite: 2011-01-05Lista mensal ▪ documentos normativos imp DNOR-01-06 84 14 Outubro 2010

DOCUMENTOSnormativosTC 213ISO 1302:2002 /DAM 2:2010Geometrical Product Specifications (GPS) Indication ofsurface texture in technical product documentationAmendment 2: Indication of material ratio requirementsData Limite: 2010-12-22TC 213ISO 5436-2:2001 /DAM 1:2010Geometrical Product Specifications (GPS) Surfacetexture: Profile method; Measurement standards Part2: Software measurement standards - Amendment 1Data Limite: 2010-12-29TC 213DIS 10360-9:2010Geometrical product specifications (GPS) Acceptanceand reverification tests for coordinate measuringmachines (CMM) Part 9: CMMs with multiple probingsystemsData Limite: 2010-11-24TC 213DIS 13225:2010Geometrical product specifications (GPS) Dimensionalmeasuring equipment; Height gauges Design andmetrological characteristicsData Limite: 2010-10-19TC 213FDIS 14405-1:2010Geometrical product specifications (GPS) Dimensionaltolerancing Part 1: Linear sizesData Limite: 2010-10-12TC 213ISO 14660-2:1999 /DAM 1:2010Geometrical Product Specifications (GPS) Geometricalfeatures Part 2: Extracted median line of a cylinder and acone, extracted median surface, local size of an extractedfeatureData Limite: 2011-01-12Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 216FDIS 10717:2010Footwear Test method for slide fasteners Burst strengthData Limite: 2010-10-26TC 216FDIS 10748:2010Footwear Test method for slide fasteners Slider lockingstrengthData Limite: 2010-11-30TC 216DIS 20877:2010Footwear Test methods for whole shoe ThermalinsulationData Limite: 2010-10-12TC 220DIS 21013-4:2010Cryogenic vessels Pilot operated pressure relief devicesPart 4: Pressure-relief accessories for cryogenic serviceData Limite: 2010-12-30TC 229FDIS 10801:2010Nanotechnologies Generation of metal nanoparticles forinhalation toxicity testing using theevaporation/condensation methodData Limite: 2010-11-16TC 229FDIS 10808:2010Nanotechnologies Characterization of nanoparticles ininhalation exposure chambers for inhalation toxicitytestingData Limite: 2010-11-09TC 213DIS 25178-604:2010Geometrical product specifications (GPS) Surfacetexture: Areal Part 604: Nominal characteristics ofnoncontact (coherence scanning interferometry)instrumentsData Limite: 2010-11-24TC 215DIS 11239:2010Health informatics Identification of medicinal productsData elements and structures for unique identificationand exchange of regulated information on pharmaceuticaldose forms, units of presentation and routes ofadministrationData Limite: 2011-02-23TC 215DIS 11240:2010Health informatics Identification of medicinal productsData elements and structures for unique identificationand exchange of units of measurementData Limite: 2011-02-23TC 215FDIS 21667:2010Health informatics Health indicators conceptualframeworkData Limite: 2010-11-02Lista mensal ▪ documentos normativos imp DNOR-01-06 85 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização9.2 Comités Técnicos da ISOLista dos Comités Técnicos da Organização Internacional de Normalização (ISO) em relação aosquais não existe ONS (Organismo de Normalização Sectorial) ou CT (Comissão Técnica) e cujosprocessos se encontram disponíveis para consulta no IPQISO/TC 4Rolling bearingsISO/TC 12Quantities, units, symbols, conversion factorsISO/TC 14Shafts for machinery and accessoriesISO/TC 19Preferred numbersISO/TC 20Aircraft and space vehiclesISO/TC 24Sieves, sieving and other sizing methodsISO/TC 25Cast iron and pig ironISO/TC 36CinematographyISO/TC 37Terminology (principles and coordination)ISO/TC 41Pulleys and belts (including veebelts)ISO/TC 42PhotographyISO/TC 47ChemistryISO/TC 48Laboratory glassware and related apparatusISO/TC 57Metrology and properties of surfacesISO/TC 59Building constructionISO/TC 60GearsISO/TC 65Manganese and chromium oresISO/TC 67Materials, equipment and offshore structuresfor petroleum and natural gas industriesISO/TC 70Internal combustion enginesISO/TC 81Common names for pesticides and otheragrochemicalsISO/TC 83Sports and recreation equipmentISO/TC 85Nuclear energyISO/TC 86RefrigerationISO/TC 100Chains and chain wheels for powertransmission and conveyorsISO/TC 101Continuous mechanical handling equipmentISO/TC 102Iron oresISO/TC 110Industrial trucksISO/TC 112Vacuum technologyISO/TC 113Hydrometric determinationsISO/TC 114HorologyISO/TC 115PumpsLista mensal ▪ documentos normativos imp DNOR-01-06 86 14 Outubro 2010

DOCUMENTOSnormativosISO/TC 116Space heating appliancesISO/TC 117Industrial fansISO/TC 118Compressors, pneumatic tools andpneumatic machinesISO/TC 119Powder metallurgyPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoISO/TC 173Technical systems and aids for disabled orhandicapped personsISO/TC 174JewelleryISO/TC 175FluorsparISO/TC 177CaravansISO/TC 179ISO/TC 120LeatherISO/TC 123Plain bearingsISO/TC 127Earth-moving machineryISO/TC 131Fluid power systemsISO/TC 132FerroalloysISO/TC 137Sizing system, designations and marking forboots and shoesISO/TC 153ValvesISO/TC 154Documents and data elements inadministration, commerce and industryISO/TC 155Nickel and nickel alloysISO/TC 163Thermal insulationISO/TC 166Ceramic ware, glassware and glass ceramicware in contact with foodISO/TC 167Steel and aluminium structuresMasonryISO/TC 182GeotechnicsISO/TC 183Copper, lead and zinc ores and concentratesISO/TC 184Industrial automation systems and integrationISO/TC 185Safety devices for protection againstexcessive pressureISO/TC 190Soil qualityISO/TC 191Humane animal (mammal) trapsISO/TC 192Gas turbinesISO/TC 195Building construction machinery andequipmentISO/TC 197Hydrogen energy technologiesISO/TC 202Microbeam analysisISO/TC 203Technical energy systemsISO/TC 204Transport information and control systemsISO/TC 170Surgical instrumentsISO/TC 205Building environmental designLista mensal ▪ documentos normativos imp DNOR-01-06 87 14 Outubro 2010

DOCUMENTOSnormativosPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoISO/TC 206Fine ceramicsISO/TC 207Management environnementalISO/TC 208Thermal turbines for industrial application(steam turbines, gas expansion turbines)Lista mensal ▪ documentos normativos imp DNOR-01-06 88 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização10. Projectos de normas e propostas de estudo de novas normas da ComissãoElectrotécnica Internacional (IEC)Os projectos de normas e propostas de estudo de novas normas estão organizadas por ComitésTécnicos.10.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.SC 17BIEC 60947-1:2007 /FDIS A1:2010Low-voltage switchgear and controlgear - General rulesData Limite: 2010-11-12SC 17DCDV 61439-3:2010Low-voltage switchgear and controlgear assemblies Part3: Distribution boards intended to be operated byordinary persons (DBO)Data Limite: 2010-12-03SC 17DFDIS 61439-5:2010Low-voltage switchgear and controlgear assemblies Part5: Assemblies for power distribution in public networksData Limite: 2010-10-22SC 17DCDV 61439-6:2010Low-voltage switchgear and controlgear assemblies Part6: Busbar trunking systems (busways)Data Limite: 2010-10-29SC 17BFDIS 62026-7:2010Low-voltage switchgear and controlgear -Controller-device interfaces (CDIs)Data Limite: 2010-11-19SC 17CFDIS 62271-206:2010High-voltage switchgear and controlgear Part 206:Voltage presence indicating systemsData Limite: 2010-12-03SC 18ACDV 60092-353:2010Electrical installations in ships Part 353: Power cablesfor rated voltages 1 kV and 3 kVData Limite: 2010-10-15SC 22GIEC 61800-3:2004 /CDV A1:2010Adjustable speed electrical power drive systems Part 3:EMC requirements and specific test methodsData Limite: 2010-10-15SC 23BCDV 60669-1:2010Switches for household and similar fixed-electricalinstallations Part 1: General requirementsData Limite: 2011-01-07SC 23BCDV 60669-1:2010Switches for household and similar fixed-electricalinstallations Part 1: General requirementsData Limite: 2011-01-07SC 23BIEC 60884-1:2002 /CDV A2:2010Plugs and socket-outlets for household and similarpurposes Part 1: General requirementsData Limite: 2011-01-07SC 23BIEC 60884-1:2002 /CDV A2:2010Plugs and socket-outlets for household and similarpurposes Part 1: General requirementsData Limite: 2011-01-07SC 23ACDV 62549:2010Articulated systems and flexible systems for cableguidingData Limite: 2010-12-03SC 23HCDV 62613-1:2010High-voltage plugs, socket-outlets and ship couplersfor high-voltage shore connection systems(HVSC-systems) Part 1: General requirementsData Limite: 2011-01-07SC 23EFDIS 62640:2010Residual current devices with or without overcurrentprotection for socket-outlets for household and similarusesData Limite: 2010-12-10SC 31JFDIS 60079-19:2010Explosive atmospheres Part 19: Equipment repair,overhaul and reclamationData Limite: 2010-11-05SC 32CIEC 60127-1:2006 /CDV A1:2010Miniature fuses Part 1: DefinitionsData Limite: 2011-01-07SC 34BIEC 60061-1:1969 /CDV A46:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 1: LampcapsData Limite: 2011-01-07SC 34BIEC 60061-2:1969 /CDV A43:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 2:LampholdersData Limite: 2011-01-07Lista mensal ▪ documentos normativos imp DNOR-01-06 89 14 Outubro 2010

DOCUMENTOSnormativosSC 34BIEC 60061-3:1969 /CDV A44:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 3: GaugesData Limite: 2011-01-07SC 34BIEC 60061-4:1990 /CDV A14:2010Lamp caps and holders together with gauges for thecontrol of interchangeability and safety Part 4:Guidelines and general informationData Limite: 2011-01-07SC 34AIEC 60357:2002 /CDV A3:2010Tungsten halogen lamps (non-vehicle) - PerformancespecificationsData Limite: 2010-11-12SC 34DCDV 60598-2-2:2010Luminaires Part 2-2: Particular requirements - RecessedluminairesData Limite: 2011-02-04SC 34AIEC 60809:1995 /CDV A5:2010Lamps for road vehicles - Dimensional, electrical andluminous requirementsData Limite: 2011-03-04SC 34AIEC 62031:2008 /CDV A1:2010LED modules for general lighting - Safety specificationsData Limite: 2011-03-04SC 34DCDV 62034:2010Automatic test systems for battery powered emergencyescape lightingData Limite: 2010-10-15SC 34ACDV 62639:2010Fluorescent Induction Lamps - PerformanceRequirementsData Limite: 2010-12-03SC 45ACDV 62582-1:2010Nuclear power plants - Instrumentation and controlimportant to safety - Electrical equipment conditionmonitoring methods Part 1: GeneralData Limite: 2010-11-19SC 45ACDV 62582-2:2010Nuclear power plants - Instrumentation and controlimportant to safety - Electrical equipment conditionmonitoring methods Part 2: Indenter modulusData Limite: 2010-11-19SC 45ACDV 62582-4:2010Nuclear power plants - Instrumentation and controlimportant to safety - Electrical equipment conditionmonitoring methods Part 4: Oxydation inductiontechniquesData Limite: 2010-11-19SC 46ACDV 61196-1-108:2010Coaxial communication cables Part 1-108: Electrical testPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãomethods - Test for characteristic impedance, phase andgroup delay, electrical length and propagation velocityData Limite: 2011-01-07SC 46ACDV 61196-1-304:2010Coaxial communication cables Part 1-304: Mechanicaltest methods - Impact resistanceData Limite: 2011-01-07SC 46ACDV 61196-1-308:2010Coaxial communication cables Part 1-308: Mechanical testmethods - Test for tensile strength and elongation forcopper-cladmetalsData Limite: 2011-01-07SC 46ACDV 61196-8:2010Coaxial communication cables Part 8: Sectionalspecification for semi-flexible cables withpolytetrafluoroethylene (PTFE) dielectricData Limite: 2011-01-07SC 46ACDV 61196-8-1:2010Coaxial communication cables Part 8-1: Blank detailspecification for semi-flexible cables withpolytetrafluoroethylene (PTFE) dielectricData Limite: 2011-01-07SC 47DCDV 60191-2:2010Propsed New Package Outline-PlasticBottom-landedSmall Outline Non-lead Package(P-BSO-N2/3/4/5/6)Data Limite: 2011-01-28SC 47DCDV 60191-6-5:2010Mechanical standardization of semiconductor devices Part6-5: General rules for the preparation of outlinedrawings of surface mounted semiconductor devicepackage-Design guide for fine-pitch ball grid array(FBGA)Data Limite: 2011-01-28SC 47DCDV 60191-6-12:2010Mechanical standardization of semiconductor devices Part6-12: General rules for the preparation of outlinedrawings of surface mounted semiconductor devicepackages - Design guide for fine-pitch land grid array(FLGA)Data Limite: 2011-03-11SC 47EFDIS 60747-7:2010Semiconductor devices - Discrete devices Part 7: BipolartransistorsData Limite: 2010-11-26SC 47EFDIS 60747-8:2010Semiconductor devices - Discrete devicesPart 8: Field-effect transistorsData Limite: 2010-11-12SC 47EFDIS 60747-14-4:2010Semiconductor devices - Discrete devicesPart 14-4: Semiconductor accelerometersData Limite: 2010-12-10Lista mensal ▪ documentos normativos imp DNOR-01-06 90 14 Outubro 2010

DOCUMENTOSnormativosSC 47EFDIS 60747-15:2010Semiconductor devices - Discrete devices Part 15:Isolated power semiconductor devicesData Limite: 2010-11-26SC 47ECDV 60747-16-5:2010Semiconductor devices Part 16-5: Microwave integratedcircuits - OscillatorsData Limite: 2011-02-25SC 47FCDV 62047-10:2010Semiconductor devices - Micro-electromechanicaldevices Part 10: Micro-pillar compression test for MEMSmaterialsData Limite: 2011-01-07SC 47FCDV 62047-12:2010Semiconductor devices - Micro-electromechanical devicesPart 12: Bending fatigue testing method of thin filmmaterials using resonant vibration of MEMS structuresData Limite: 2011-01-07SC 48BCDV 60512-16-21:2010Connectors for electronic equipment - tests andmeasurements Part 16-21:Test 16u: Whisker test via theapplication of external mechanical stressesData Limite: 2011-02-04SC 48BCDV 60512-27-100:2010Connectors for electrical equipment - Tests andmeasurements Part 27-100: Signal integrity tests up to500 mhz on 60603-7 series connectors - Tests 27a to 27gData Limite: 2010-10-08SC 48DCDV 61587-1:2010Mechanical structures for electronic equipment-Tests forIEC 60917 and IEC 60297 Part 1: Environmentalrequirements and tests, safety aspects for cabinets,racks, subracks and chassisData Limite: 2011-03-11SC 48DCDV 61587-2:2010Mechanical structures for electronic equipment - Testsfor IEC 60917 and IEC 60297 Part 2: Seismic tests forcabinets and racksData Limite: 2011-02-04SC 59KCDV 60350-1:2010Household electric cooking appliances Part 1: Ranges,ovens, steam ovens and grills - Methods for measuringperformanceData Limite: 2011-02-25SC 59KCDV 60350-2:2010Household electric cooking appliances Part 2: Hobs -Methods for measuring performanceData Limite: 2011-02-25SC 59KCDV 60704-2-10:2010Household and similar electrical appliances - Test codefor the determination of airborne acoustical noise Part2-10: Particular requirements for electric cookingranges, ovens, grills, microwave ovens and anyPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãocombination of theseData Limite: 2010-12-03SC 62DCDV 60601-2-3:2010Medical electrical equipment Part 2-3: Particularrequirements for basic safety and essential performanceof short-wave therapy equipmentData Limite: 2011-02-18SC 62DFDIS 60601-2-4:2010Medical electrical equipment Part 2-4: Particularrequirements for basic safety and essential performance ofcardiac defibrillatorsData Limite: 2010-10-22SC 62DCDV 60601-2-6:2010Medical electrical equipment Part 2-6: Particularrequirements for the basic safety and essentialperformance of microwave therapy equipmentData Limite: 2011-02-18SC 62CFDIS 60601-2-8:2010Medical electrical equipment Part 2-8: Particularrequirements for basic safety and essential performanceof therapeutic X-ray equipment operating in the range10 kV to 1 MVData Limite: 2010-10-15SC 62DCDV 60601-2-10:2010Medical electrical equipment Part 2-10: Particularrequirements for the basic safety and essentialperformance of nerve and muscle stimulatorsData Limite: 2011-02-18SC 62CCDV 60601-2-11:2010Medical electrical equipment Part 2-11: Particularrequirements for basic safety and essentialperformance of gamma beam therapy equipmentData Limite: 2010-10-08SC 62DFDIS 60601-2-46:2010Medical electrical equipment Part 2-46: Particularrequirements for the basic safety and essentialperformance of operating tablesData Limite: 2010-11-26SC 62BFDIS 62464-2:2010Magnetic resonance equipment for medical imaging Part 2:Classification criteria for pulse sequencesData Limite: 2010-10-08SC 62DCDV 80601-2-60:2010Medical electrical equipment Part 2-60: Particularrequirements for basic safety and essential performanceof dental equipmentData Limite: 2010-10-01SC 62DFDIS 80369-1:2010Small-bore connectors for liquids and gases inhealthcare applications Part 1: General requirements(ISO 80369-1)Data Limite: 2010-11-26Lista mensal ▪ documentos normativos imp DNOR-01-06 91 14 Outubro 2010

DOCUMENTOSnormativosSC 65BFDIS 60534-8-3:2010Industrial-process control valves Part 8-3: Noiseconsiderations - Control valve aerodynamic noiseprediction methodData Limite: 2010-10-22SC 65EFDIS 61804-3:2010Function blocks (FB) for process control Part 3:Electronic Device Description Language (EDDLData Limite: 2010-10-01SC 65ECDV 61987-11:2010Industrial-Process Measurement and Control - DataStructures and Elements in Process Equipment CataloguesPart 11: List of Properties (LOP) of measuring equipmentfor electronic data exchange - generic structuresData Limite: 2011-02-18SC 65ECDV 62337:2010Commissioning of electrical, instrumentation and controlsystems in the process industry - Specific phases andmilestonesData Limite: 2011-01-07SC 65ECDV 62381:2010Automation systems in the process industry - Factoryacceptance test (FAT), site acceptance test (SAT), and siteintegration test (SIT)Data Limite: 2011-01-07SC 65ECDV 62382:2010Electrical and instrumentation loop checkData Limite: 2011-01-07SC 65ECDV 62382:2010Electrical and instrumentation loop checkData Limite: 2011-01-07SC 77BCDV 61000-4-4:2010Electromagnetic compatibility (EMC) Part 4-4:Testing andmeasurement techniques - Electrical fast transient/burstimmunity testData Limite: 2011-01-14SC 86ACDV 60794-2-10:2010Optical fibre cables Part 2-10: Indoor optical fibrecables - Family specification for simplex and duplexcablesData Limite: 2011-01-07SC 86BFDIS 61300-2-6:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement procedures Part2-6: Tests - Tensile strength of coupling mechanismData Limite: 2010-11-19SC 86BFDIS 61300-2-23:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement procedures Part2-23: Tests - Sealing for non-pressurized closures offibre optic devicesData Limite: 2010-10-22Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoSC 86BFDIS 61300-3-22:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement proceduresPart 3-22: Examinations and measurements - Ferrulecompression forceData Limite: 2010-11-19SC 86BCDV 61300-3-39:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement procedures Part3-39: Examinations and measurements - Physical Contact(PC) optical connector reference plug selection forreturn loss measurementsData Limite: 2010-11-05SC 86BCDV 61300-3-46:2010Fibre optic interconnecting devices and passivecomponents - Basic test and measurement proceduresPart 3-46: Measurement - Bore Diameter for Guide Pinin MT FerrulesData Limite: 2011-01-07SC 86BFDIS 61753-086-6:2010Fibre optic interconnecting devices and passivecomponents - Performance standard Part 086-6:Non-connectorised single-mode bidirectional 1 490 /1 550 nm downstream and 1 310 nm upstream WWDMdevices for category O - Uncontrolled environmentData Limite: 2010-11-19SC 86BFDIS 61753-087-2:2010Fibre optic interconnecting devices and passivecomponents - Performance standard Part 087-2:Non-connectorized single-mode bidirectional 1 310 nmupstream and 1 490 nm downstream WWDM devices forcategory C - Controlled environmentData Limite: 2010-11-19SC 86BCDV 61754-20:2010Fibre optic interconnecting devices and passivecomponents - Fibre optic connector interfaces Part 20:Type LC connector familyData Limite: 2011-01-07SC 86BCDV 61754-20:2010Fibre optic interconnecting devices and passivecomponents - Fibre optic connector interfaces Part 20:Type LC connector familyData Limite: 2011-01-07SC 86CFDIS 62148-2:2010Fibre optic active components and devices - Package andinterface standards Part 2: SFF 10-pin transceiversData Limite: 2010-11-26SC 86CFDIS 62148-3:2010Fibre optic active components and devices - Package andinterface standards Part 3: SFF 20-pin transceiversData Limite: 2010-10-29SC 86CFDIS 62150-2:2010Fibre optic active components and devices - Test andmeasurement procedures Part 2: ATM-PON transceiversData Limite: 2010-11-19Lista mensal ▪ documentos normativos imp DNOR-01-06 92 14 Outubro 2010

DOCUMENTOSnormativosSC 86CCDV 62343-2:2010Dynamic modules Part 2: Reliability qualificationData Limite: 2010-11-19SC 86CCDV 62572-3:2010Fibre optic active components and devices - Reliabilitystandards Part 3: Laser modules used fortelecommunicationData Limite: 2011-02-11SC CISPR/ACDV 16-4-2:2010Specification for radio disturbance and immunitymeasuring apparatus and methods Part 4-2: Uncertainties,statistics and limit modelling - Measurementinstrumentation uncertaintyData Limite: 2010-11-05SC CISPR/ICDV 32:2010Electromagnetic Compatibility of Multimedia equipment- Emission RequirementsData Limite: 2010-11-26SC CISPR/AFDIS 61000-4-22:2010Electromagnetic compatibility (EMC) Part 4-22:Testing and measurement techniques - Radiatedemissions and immunity measurements in fully anechoicrooms (FARs)Data Limite: 2010-10-08SC CISPR/HIEC 61000-6-3:2006 /FDIS A1:2010Electromagnetic compatibility (EMC) Part 6-3: Genericstandards - Emission standard for residential, commercialand light-industrial environmentsData Limite: 2010-11-05SC CISPR/HIEC 61000-6-4:2006 /FDIS A1:2010Electromagnetic compatibility (EMC) Part 6-4: Genericstandards - Emission standard for industrialenvironmentsData Limite: 2010-11-05TC 1IEC 60050-617:2009 /CDV A1:2010International electrotechnical vocabulary Part 617:Organizacion/market of electricityData Limite: 2011-02-04TC 2CDV 60034-18-34:2010Rotating electrical machines Part 18-34: Functionalevaluation of insulation systems - Test procedures forform-wound windings - Evaluation of thermomechanicalendurance of insulation systemsData Limite: 2011-01-07TC 3CDV 62023:2010Structuring of technical information and documentation(Proposed Horizontal Standard)Data Limite: 2011-01-14TC 3CDV 62023:2010Structuring of technical information and documentation(Proposed Horizontal Standard)Data Limite: 2011-01-14Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 3CDV 62027:2010Preparation of object lists, including parts lists(Proposed Horizontal Standard)Data Limite: 2011-01-14TC 3CDV 62027:2010Preparation of object lists, including parts lists(Proposed Horizontal Standard)Data Limite: 2011-01-14TC 3FDIS 62507-1:2010Identification systems enabling unambiguous informationinterchange - Requirements Part 1: Principles andmethodsData Limite: 2010-10-01TC 4CDV 61362:2010Guide to specification of hydraulic turbine governingsystemsData Limite: 2011-02-11TC 4FDIS 62006:2010Hydraulic Machines - Acceptance tests of smallhydroelectric installationsData Limite: 2010-10-01TC 9CDV 61881-2:2010Railway applications - Rolling stock equipment -Capacitors for power electronics Part 2: Aluminiumelectrolytic capacitors with non solid electrolyteData Limite: 2011-01-07TC 9CDV 61881-2:2010Railway applications - Rolling stock equipment -Capacitors for power electronics Part 2: Aluminiumelectrolytic capacitors with non solid electrolyteData Limite: 2011-03-04TC 9CDV 61881-3:2010Railway Applications-Rolling stock equipment - Capacitorfor power electronics Part 3: Electric double-layercapacitorData Limite: 2011-01-07TC 9CDV 61881-3:2010Railway applications - Rolling stock equipment -Capacitors for power electronics Part 3: Electricdouble-layer capacitorsData Limite: 2011-03-04TC 10CDV 60296:2010Fluids for electrotechnical applications - Unused mineralinsulating oils for transformers and switchgearData Limite: 2011-01-14TC 10CDV 60422:2010Mineral insulating oils in electrical equipment -Supervision and maintenance guidanceData Limite: 2011-02-18Lista mensal ▪ documentos normativos imp DNOR-01-06 93 14 Outubro 2010

DOCUMENTOSnormativosTC 10CDV 60475:2010Method of sampling insulating liquidsData Limite: 2011-01-14TC 10CDV 60567:2010Oil-filled electrical equipment - Sampling of gases andanalysis of free and dissolved gases - GuidanceData Limite: 2011-01-14TC 13CDV 62056-31:2010Electricity metering - Data exchange for meter reading,tariff and load control Part 31: Use of local area networkson twisted pair with carrier signallingData Limite: 2010-11-26TC 15IEC 60674-3-1:1998 /CDV A1:2010Plastic films for electrical purposes Part 3:Specifications for individual materials Sheet 1: Biaxiallyoriented polypropylene (PP) films for capacitorsData Limite: 2011-01-07TC 15IEC 60674-3-1:1998 /CDV A1:2010Plastic films for electrical purposes Part 3:Specifications for individual materials Sheet 1: Biaxiallyoriented polypropylene (PP) films for capacitorsData Limite: 2011-01-07TC 15FDIS 60684-3-283:2010Flexible Insulating Sleeving Part 3: Specifications forindividual types of sleeving Sheet 283: Heat-shrinkable,polyolefin sleeving for bus-bar insulationData Limite: 2010-11-19TC 20FDIS 60502-4:2010Power cables with extruded insulation and theiraccessories for rated voltages from 1 kV (Um = 1,2 kV)up to 30 kV (Um = 36 kV) Part 4: Test requirements onaccessories for cables with rated voltages from 6 kV(Um = 7,2 kV) up to 30 kV (Um = 36 kV)Data Limite: 2010-11-26TC 21FDIS 62660-1:2010Secondary lithium-ion cells for the propulsion of electricroad vehicles Part 1: Performance testingData Limite: 2010-11-19TC 21FDIS 62660-2:2010Secondary lithium-ion cells for the propulsion of electricroad vehicles Part 2: Reliability and abuse testingData Limite: 2010-11-19TC 23PAS 62695:2010DC plugs and socket outlets to be used in data centrepremises - General requirements and standard sheetsData Limite: 2010-10-01TC 26FDIS 60974-6:2010Arc welding equipment Part 6: Limited duty equipmentData Limite: 2010-10-22TC 27FDIS 60519-1:2010Safety in electroheating installations Part 1: GeneralPublicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãorequirementsData Limite: 2010-10-29TC 27CDV 61307:2010Industrial microwave heating installations - Test methodsfor the determination of power outputData Limite: 2010-11-26TC 27CDV 61307:2010Industrial microwave heating installations - Test methodsfor the determination of power outputData Limite: 2010-11-26TC 29CDV 60118-15:2010Electroacoustics - Hearing aids Part 15: Methods forcharacterising signal processing in hearing aids with aspeech-like signalData Limite: 2010-10-29TC 29CDV 61672-1:2010Electroacoustics - Sound level meters Part 1:SpecificationsData Limite: 2011-02-18TC 29CDV 61672-2:2010Electroacoustics - Sound level meters Part 2: Patternevaluation testsData Limite: 2011-02-18TC 29CDV 61672-3:2010Electroacoustics - Sound level meters Part 3: PeriodictestsData Limite: 2011-02-18TC 29FDIS 62489-2:2010Electroacoustics - Audio-frequency induction loopsystems for assisted hearing Part 2: Methods ofcalculating and measuring the low-frequency magneticfield emissions from the loop for assessing conformitywith guidelines on limits for human exposureData Limite: 2010-12-10TC 29CDV 62585:2010Electroacoustics - methods to determine corrections toobtain the free-field response of a sound level meterData Limite: 2011-02-04TC 31CDV 60079-35-2:2010Caplights for use in mines susceptible to firedamp Part2: Performance and other safety-related mattersData Limite: 2010-12-17TC 33FDIS 60143-4:2010Series capacitors for power systems Part 4: Thyristorcontrolled series capacitorsData Limite: 2010-10-22TC 33FDIS 60252-2:2010AC motor capacitors Part 2: Motor start capacitorsData Limite: 2010-11-19Lista mensal ▪ documentos normativos imp DNOR-01-06 94 14 Outubro 2010

DOCUMENTOSnormativosTC 33CDV 60358-1:2010Coupling capacitors and capacitor dividers Part 1:Common ClausesData Limite: 2011-01-14TC 37CDV 60099-5:2010Surge arresters Part 5: Selection and applicationrecommendationsData Limite: 2011-03-11TC 37FDIS 60099-8:2010Surge arresters Part 8: Metal-oxide surge arresters withexternal series gap (EGLA) for overhead transmission anddistribution lines of a.c. systems above 1 kVData Limite: 2010-12-03TC 40CDV 60115-8-1:2010Fixed resistors for use in electronic equipment Part 8-1:Blank detail specification - Fixed chip resistors -Assessment level EData Limite: 2010-11-12TC 40CDV 60384-2:2010Fixed capacitors for use in electronic equipment Part 2:Sectional specification: Fixedmetallizedpolyethylene-terephthalate film dielectricd.c.capacitorsData Limite: 2011-02-18TC 40CDV 60384-13:2010Fixed capacitors for use in electronicequipment Part 13:Sectional specification - Fixed polypropylene filmdielectric metal foil d.c. capacitorsData Limite: 2011-02-18TC 40CDV 60384-21:2010Fixed capacitors for use in electronicequipment Part 21:Sectional specification: Fixed surface mount multilayercapacitors of ceramic dielectric, Class 1Data Limite: 2011-02-18TC 40CDV 60384-22:2010Fixed capacitors for use in electronicequipment Part 22:Sectional specification: Fixed surface mount multilayercapacitors of ceramic dielectric, Class 2Data Limite: 2011-02-18TC 42FDIS 60060-2:2010High-voltage test techniques Part 2: Measuring Systems -" Proposed Horizontal Standard "Data Limite: 2010-11-05TC 44IEC 61496-1:2004 /CDV A2:2010Safety of machinery - Electro-sensitive protectiveequipment Part 1: General requirements and testsData Limite: 2011-02-18TC 46CDV 62037-1:2010Passive r.f. and microwave devices, Intermodulationlevel measurement Part 1: General requirements andmeasuring methods (Item 8.2.2)Data Limite: 2010-10-15Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 46CDV 62037-2:2010Passive r.f. and microwave devices, Intermodulationlevel measurement Part 2: Measurement of passiveintermodulation in coaxial cable assemblies (Item 8.2.3)Data Limite: 2010-10-15TC 46CDV 62037-3:2010Passive r.f. and microwave devices, Intermodulationlevel measurement Part 3: Measurement of passiveintermodulation in coaxial connectors (Item 8.2.4)Data Limite: 2010-10-15TC 46CDV 62037-4:2010Passive r.f. and microwave devices, Intermodulationlevel measurement Part 4: Measurement of passiveintermodulation in coaxial cables (Item 8.2.5)Data Limite: 2010-10-15TC 46CDV 62037-5:2010Passive r.f. and microwave devices, Intermodulationlevel measurement Part 5: Measurement of passiveintermodulation in filters (Item 8.2.5)Data Limite: 2010-10-15TC 46CDV 62037-6:2010Dispositifs RF et à micro-ondes passifs, mesure duniveau d'intermodulation Partie 6: Mesure del'intermodulation passive dans les antennesData Limite: 2011-01-07TC 46CDV 62037-6:2010Passive r.f. and microwave devices, Intermodulationlevel measurement Part 6: Measurement of passiveintermodulation in antennas (Item 8.2.7)Data Limite: 2010-10-15TC 47FDIS 60749-15:2010Semiconductor devices - Mechanical and climatic testmethods Part 15: Resistance to solderingtemperature forthrough-hole mounted devicesData Limite: 2010-10-15TC 47FDIS 60749-34:2010Semiconductor Devices - Mechanical And Climatic TestMethods Part 34: Power cyclingData Limite: 2010-10-15TC 55IEC 60851-5:2008 /CDV A1:2010Winding wires - test methods Part 5: Electrical propertiesData Limite: 2011-01-21TC 55IEC 60851-5:2008 /CDV A1:2010Winding wires - test methods Part 5: Electrical propertiesData Limite: 2011-01-21TC 56CDV 61850-7-410:2010Communication networks and systems for power utilityautomation Part 7-410: Hydroelectric power plants -Communication for monitoring and controlData Limite: 2011-03-11TC 57FDIS 61850-7-3:2010Lista mensal ▪ documentos normativos imp DNOR-01-06 95 14 Outubro 2010

DOCUMENTOSnormativosCommunication networks and systems for power utilityautomation Part 7-3: Basic communication structure -Common data classesData Limite: 2010-10-29TC 61IEC 62115:2003 /FDIS A2:2010Electric toys - SafetyData Limite: 2010-11-12TC 66CDV 61010-2-091:2010Safety requirements for electrical equipment formeasurement, control, and laboratory use Part 2-091:Particular requirements for cabinet x-ray systemsData Limite: 2011-01-07TC 76IEC 60825-4:2006 /CDV A2:2010Annex D (normative) Proprietary laser guard testingData Limite: 2010-10-08TC 79FDIS 62642-2-3:2010Alarm systems - Intrusion and hold-up systems Part 2-3:Intrusion detectors - Microwave detectorsData Limite: 2010-12-03TC 79FDIS 62642-2-4:2010Alarm systems - Intrusion and hold-up systems Part 2-4:Intrusion detectors - Combined passive infrared /Microwave detectorsData Limite: 2010-12-03TC 79FDIS 62642-2-5:2010Alarm systems - Intrusion and hold-up systems Part 2-5:Intrusion detectors - Combined passive infrared /Ultrasonic detectorsData Limite: 2010-12-03TC 79FDIS 62642-2-6:2010Alarm systems - Intrusion and hold-up systems Part 2-6:Intrusion detectors - Opening contacts (magnetic)Data Limite: 2010-12-03Publicação oficial do IPQ, enquanto Organismo Nacional de NormalizaçãoTC 80FDIS 62287-1:2010Maritime navigation and radiocommunication equipmentand systems - Class B shipborne equipment of theautomatic identification system (AIS) Part 1:Carrier-sense time division multiple access (CSTDMA)techniquesData Limite: 2010-10-29TC 81FDIS 62305-1:2010Protection against lightning Part 1: General PrinciplesData Limite: 2010-11-05TC 81FDIS 62305-2:2010Protection against lightning Part 2: Risk managementData Limite: 2010-11-05TC 81FDIS 62305-3:2010Protection against lightning Part 3: Physical damage tostructure and life hazardData Limite: 2010-11-05TC 81FDIS 62305-4:2010Protection against lightning Part 4: Electrical andelectronic systems within structuresData Limite: 2010-11-05TC 81FDIS 62561-4:2010Lightning protection system components (LPSC) Part 4:Requirements for conductor fastenersData Limite: 2010-11-05TC 81CDV 62561-7:2010Lightning Protection System Components (LPSC) Part 7:Requirements for earthing enhancing compoundsData Limite: 2011-03-04TC 82CDV 61701:2010Salt mist corrosion testing of photovoltaic (PV) modulesData Limite: 2011-01-14TC 80FDIS 61162-1:2010Maritime navigation and radiocommunication equipment andsystems - Digital interfaces Part 1: Single talker andmultiple listenersData Limite: 2010-11-05TC 80CDV 61162-450:2010Maritime navigation and radiocommunication equipment andsystems - Digital interfaces Part 450: Multiple talkersand multiple listeners - Light-weight ship systemsinterconnectionData Limite: 2010-10-01TC 80CDV 61993-2:2010Maritime navigation and radiocommunication equipmentand systems - Automatic Identification Systems (AIS)Part 2: Class A shipborne equipment of the universalAutomatic Identification System (AIS) - Operational andperformance requirements, methods of test and requiredtest resultsData Limite: 2011-01-07TC 82FDIS 61853-1:2010Photovoltaic (PV) module performance testing and energyrating Part 1: Irradiance and temperature performancemeasurements and power ratingData Limite: 2010-11-26TC 82CDV 61853-2:2010Photovoltaic (PV) module performance testing and energyrating Part 2: Spectral response, incidence angle andmodule operating temperature measurementsData Limite: 2010-12-17TC 82CDV 62253:2010Photovoltaic pumping systems - Design qualificationand performance measurementsData Limite: 2011-01-21TC 82FDIS 62509:2010Battery charge controllers for photovoltaic systems -Performance and functioningData Limite: 2010-12-03Lista mensal ▪ documentos normativos imp DNOR-01-06 96 14 Outubro 2010

DOCUMENTOSnormativosTC 86FDIS 62496-2-2:2010Optical circuit boards Part 2-2: Measurements -Dimensions of optical circuit boardsData Limite: 2010-12-10TC 86FDIS 62496-3:2010Optical circuit boards Part 3: Performance standards -General and guidanceData Limite: 2010-12-10TC 86FDIS 62496-4:2010Optical circuit boards Part 4: Interface standards -General and guidanceData Limite: 2010-12-10TC 88FDIS 61400-25-6:2010Wind Turbines Part 25-6: Communications for monitoringand control of wind power plants - Logical node classesand data classes for condition monitoringData Limite: 2010-10-15TC 90CDV 61788-15:2010Superconductivity Part 15: Electronic characteristicmeasurements - Intrinsic surface impedance ofsuperconductor films at microwave frequenciesData Limite: 2010-12-17TC 91CDV 61249-2-27:2010Materials for printed boards and other interconnectingstructures Part 2-27: Reinforced base materials clad andunclad - Bismaleimide/triazine modifiedwithnon-halogenated epoxide woven glass laminate sheetsof defined flammability (vertical burning test),copper-cladData Limite: 2011-02-25TC 91CDV 61249-2-30:2010Materials for printed boards and other interconnectingstructures Part 2-30: Reinforced base materials clad andunclad - Non-halogenated epoxide modified cyanate esterwoven glass laminate of defined flammability (verticalburning test), copper-cladData Limite: 2011-02-25TC 91CDV 61249-2-39:2010Materials for printed boards and other interconnectingstructures Part 2-39: Reinforced base materials clad andunclad - Modified epoxide and non-epoxide, woven E-glasslaminated sheets of defined flammability (vertical burningtest), copper-clad for lead-free assemblyData Limite: 2011-02-25TC 91CDV 61249-2-40:2010Materials for printed boards and other interconnectingstructures Part 2-40: Reinforced base materials clad andunclad - High Performance, modified, non-halogenatedepoxide woven E-glass laminated sheets of definedflammability (vertical burning test), copper-clad forlead-free assemblyData Limite: 2011-02-25TC 96CDV 61558-2-15:2010Safety of transformers, reactors, power supply units andcombinations thereof Part 2-15: Particular RequirementsPublicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãoand tests for isolating transformers for the supply ofmedical locationsData Limite: 2010-12-10TC 97CDV 61821:2010Electrical installations for lighting and beaconing ofaerodromes - Maintenance of aeronautical ground lightingconstant current series circuitsData Limite: 2010-11-12TC 100FDIS 60728-3:2010Cable networks for television signals, sound signals andinteractive services Part 3: Active wideband equipmentfor cable networks (TA5)Data Limite: 2010-10-22TC 100CDV 61937-10:2010Digital audio - Interface for non-linear PCM encodedaudio bitstreams applying IEC 60958 - Part 10:Non-linear PCM bitstreams according to the MPEG-4Audio Lossless Coding (ALS) formatData Limite: 2011-01-07TC 100FDIS 61966-12:2010Multimedia systems and equipment - Colour measurementand management Part 12-1: Metadata for identificationof colour gamut (Gamut ID)Data Limite: 2010-12-03TC 100CDV 62516-2:2010Terrestrial digital multimedia broadcasting (T-Dmb)receivers Part 2: Interactive data services using BIFS(TA1)Data Limite: 2011-01-21TC 100CDV 62574:2010Audio, video and multimedia systems -General channelassignment of multichannel audioData Limite: 2010-10-08TC 100CDV 62574:2010Audio, video and multimedia systems -General channelassignment of multichannel audioData Limite: 2010-10-08TC 101CDV 61340-4-4:2010Electrostatics Part 4-4: Standard test methods for specificapplications - Electrostatic classification of flexibleintermediate bulk containers (FIBC)Data Limite: 2011-01-07TC 103CDV 62553:2010Methods of measurement for digital network - Performancecharacteristics of terrestrial digital multimediatransmission networkData Limite: 2011-01-07TC 104CDV 60068-1:2010Environmental testing Part 1: General and guidanceData Limite: 2010-10-15TC 104CDV 60068-1:2010Environmental testing Part 1: General and guidanceLista mensal ▪ documentos normativos imp DNOR-01-06 97 14 Outubro 2010

DOCUMENTOSnormativosData Limite: 2010-10-15TC 104CDV 60068-2-55:2010Environmental testing Part 2-55: Tests - Test Ee andguidance: Loose cargo testing including BounceData Limite: 2011-02-04TC 104IEC 60068-2-57:1999 /CDV A1:2010Environmental testing Part 2-57: Test methods - Test Ff:Vibration - Time-history & sine-beat methodData Limite: 2011-02-18Publicação oficial do IPQ, enquanto Organismo Nacional de Normalizaçãoof solid electrical insulating materialsData Limite: 2010-10-08TC 116IEC 60745-2-3:2006 /FDIS A1:2010Hand-held motor-operated electric tools - Safety Part 2-3:Particular requirements for grinders, polishers anddisk-type sandersData Limite: 2010-10-08TC 105CDV 62282-3-3:2010Fuel cell technologies Part 3-3: Stationary fuel cell powersystems - InstallationData Limite: 2011-01-14TC 105CDV 62282-3-200:2010Fuel cell technologies Part 3-200: Stationary fuel cellpower systems - Performance test methodsData Limite: 2011-01-07TC 105CDV 62282-5-1:2010Fuel cell technologies Part 5-1: Portable fuel cell powersystems - SafetyData Limite: 2011-02-04TC 110CDV 61988-1:2010Plasma Display Panels Part 1: Terminology and lettersymbolsData Limite: 2011-01-07TC 110CDV 61988-2-1:2010Plasma Display Panels Part 2-1: Measuring methods -Optical and optoelectricalData Limite: 2011-01-07TC 110CDV 61988-2-4:2010Plasma display panels Part 2-4: Measuring methods -Visual quality: Image artifactsData Limite: 2011-02-25TC 110CDV 62341-6-2:2010Organic light emitting diode (OLED) displays Part 6-2:Measuring methods of visual quality andambientperformanceData Limite: 2011-02-11TC 111CDV 62474:2010Material declaration for products of and for theelectrotechnical industryData Limite: 2011-01-07TC 111CDV 62542:2010Environmental standardization for electrical andelectronic products and systems - Standardization ofenvironmental aspects - Glossary of terms - Proposedhorizontal standardData Limite: 2010-10-15TC 112CDV 60212:2010Standard conditions for use prior to and during the testingLista mensal ▪ documentos normativos imp DNOR-01-06 98 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização11. Projectos de normas da Organização Internacional de Normalização(ISO)/Comissão Electrotécnica Internacional (IEC)Os projectos de norma estão organizados por “Comité Técnico conjunto” ISO/IEC.11.1 Projectos em inquérito públicoPara cada referência menciona-se a designação codificada, o título e a data limite para aapresentação de comentários.ISO/IEC TC CABPUBFDIS 17021:2010Conformity assessment - Requirements for bodiesproviding audit and certification of management systemsData Limite: 2010-11-12Lista mensal ▪ documentos normativos imp DNOR-01-06 99 14 Outubro 2010

Publicação oficial do IPQ, enquanto Organismo Nacional de Normalização12. Edição e anulação de outros documentos NormativosAnulação de Directivas CNQ, editadas no âmbito do então Conselho Nacional da Qualidade.12.1 Directivas CNQDirectiva CNQ 1:1985Normas Portuguesas. Regras gerais para a sua apresentaçãoDirectiva CNQ 2:1999Comissões técnicas portuguesas de normalização. Criação e funcionamentoDirectiva CNQ 3:2001Normas Portuguesas. Procedimentos para a sua aprovaçãoDirectiva CNQ 4:1993Organismos com funções de normalização sectorial. Reconhecimento da qualificaçãoEstas Directivas foram substituídas pelos seguintes documentosRPNP – 010:2010Organismos de Normalização Sectorial (ONS). Constituição, reconhecimento e atribuiçõesRPNP – 020:2010Organismos Gestores de Comissão Técnica (OGCT). Constituição, reconhecimento e atribuiçõesRPNP – 030:2010Comissões Técnicas de Normalização (CT). Constituição, reconhecimento e funcionamentoRPNP – 040:2010Documentos normativos portugueses. Tipologia, homologação, aprovação, revisão e anulaçãoRPNP – 041:2010Documentos normativos portugueses. Regras gerais para a sua apresentaçãoLista mensal ▪ documentos normativos imp DNOR-01-06 100 14 Outubro 2010