pcp_reference_guide_v2.5 - Tasking

5−56PCP Reference Manual−C (−−cpu)Command line syntax−Ccpu−−cpu=cpuDescriptionWith this option you define the target processor for which you create yourapplication. Make sure you choose a target processor with pcp!The assembler automatically includes the register file regcpu.def, unlessyou specify assembler option −−no−tasking−sfr.ExampleTo define this on the command line:aspcp −Ctc1920b test.srcaspcp −−cpu=tc1920b test.srcThe assembler assembles test.src for the TC11IB processor andincludes the register file reg1920b.def.To avoid conflicts, make sure you specify the same target processor as youdid for the compiler.TOOL OPTIONSRelated informationAssembler option −−no−tasking−sfr (Do not include .def file)Compiler option −C (Use SFR definitions for CPU)Control program option −C (Use SFR definitions for CPU)Section 5.4, Calling the Assembler, in Chapter Using the Assembler of theUser’s Manual.