dtc b1152/28 passenger airbag on/off indicator ... - Highlander Club

05-1356DIAGNOSTICS-SUPPLEMENTAL RESTRAINT SYSTEM4 CHECK WIRE HARNESS (SHORT)TelltaleLampAssyDCBAAirbagSensorAssyCenter(a)Measure the resistance according to the value(s) in thetable below.Standard:Tester connection Condition Specified conditionA17-1 (P-AB) -A17-25 (PAON)Always1 MΩ or HigherA17P-ABPAONH01015 H43468G27651 H40065H44539NGREPAIR OR REPLACE WIRE HARNESSOK5 CHECK AIR BAG SENSOR ASSY CENTERCGH43087H01012H10600TelltaleLampAssyDLC3H43467H01069TCAirbagSensorAssyCenterDTC B1152/<strong>28</strong>H44541(a) Connect the connectors to the <strong>airbag</strong> sensor assy center.(b) Connect the connector to the clock assy.(c) Connect the negative (-) terminal cable to the battery,and wait for at least 2 seconds.(d) Turn the ignition switch to the ON position, and wait for atleast 60 seconds.(e) Clear the DTCs stored in memory (see page 05-1215 ).(f) Turn the ignition switch to the LOCK position.(g) Turn the ignition switch to the ON position, and wait for atleast 60 seconds.(h) Check the DTCs (see page 05-1215 ).OK:DTC B1152/<strong>28</strong> is not output.HINT:Codes other than code B1152/<strong>28</strong> may be output at this time, butthey are not related to this check.NGREPLACE AIR BAG SENSOR ASSY CENTER(SEE PAGE 60-53 )OKUSE SIMULATION METHOD TO CHECK2005 HIGHLANDER REPAIR MANUAL (RM1144U)Author:Date:1546