dtc b1152/28 passenger airbag on/off indicator ... - Highlander Club

DIAGNOSTICS-SUPPLEMENTAL RESTRAINT SYSTEM05-13576 WIRE HARNESS (SOURCE VOLTAGE)SW1T15IG+(a)(b)(c)Connect the negative (-) terminal cable to the battery,and wait for at least 2 seconds.Turn the ignition switch to the ON position.Measure the voltage and resistance according to the value(s)in the table below.Standard:Tester connection Condition Specified conditionI40606H44540T15-4 (IG+) -Body groundT15-5 (SW1) -Body groundIgnition switch ONAlways10 to 14 VBelow 1 ΩNGREPLACE TELLTALE LAMP ASSY OR WIREHARNESS (TELLTALE LAMP ASSY - BATTERY)OR BATTERYOK7 CHECK WIRE HARNESS (OPEN)P-ABTelltaleLamp DAssyH44540H01015 H43469H43625 G27651T15CBPAONPAONService WireAAirbagSensorAssyCenterA17P-ABH44542(a) Turn the ignition switch to the LOCK position.(b) Disconnect the negative (-) terminal cable from the battery,and wait for at least 90 seconds.(c) Using a service wire, connect T15-2 (P-AB) and T15-7(PAON) of connector ”C”.NOTICE:Do not forcibly insert a service wire into the terminals ofconnector when connecting.(d) Measure the resistance according to the value(s) in thetable below.Standard:Tester connection Condition Specified conditionA17-1 (P-AB) -A17-25 (PAON)AlwaysBelow 1 ΩNGREPAIR OR REPLACE WIRE HARNESSOK2005 HIGHLANDER REPAIR MANUAL (RM1144U)Author:Date:1547