Certificate of Product Conformance S700
Certificate of Product Conformance S700
Certificate of Product Conformance S700
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Certificate</strong> <strong>of</strong> <strong>Product</strong> <strong>Conformance</strong>SERCOS International e.V. (SI) hereby issues thisDeclaration <strong>of</strong> Conformity (<strong>Certificate</strong> No. Z00037)for the following product:<strong>Product</strong> Name:S706Vendor Name:Danaher Motion GmbHVendor Site:Duesseldorf, GermanyHardware Version: 05_21Firmware Version: 3.00This certificate confirms that the above named product successfully passed the<strong>of</strong>ficial SERCOS interface conformance test and for this reason compliancy to IEC61784-1 (Ed.2.0) CP 16/2 (formerly IEC 61491) as well as the Packaging Pr<strong>of</strong>ileExtended is attested.The tests were executed in the test laboratory <strong>of</strong> ISW, University <strong>of</strong> Stuttgart,Germany, authorized by SERCOS International. The type and extent <strong>of</strong> testing andtest results are reported in Test Report No. 130208_19 dated February 13, 2008.This certificate is submitted on the basis <strong>of</strong> SERCOS International’s guidelines fortesting and certification.Stuttgart, 11/03 2008(Seal)Peter Lutz(Official in charge)
Transfer <strong>of</strong> <strong>Certificate</strong> <strong>of</strong><strong>Product</strong> <strong>Conformance</strong>SERCOS International e.V. (SI) hereby issues thisDeclaration <strong>of</strong> Conformity (<strong>Certificate</strong> No. VZ1.0035)for the following product:<strong>Product</strong> Name:S701Vendor Name:Danaher Motion GmbHVendor Site:Duesseldorf, GermanyHardware Version: 05_21Firmware Version: 3.00This certificate confirms that this product uses already successfully certifiedprotocol s<strong>of</strong>tware and communication hardware (<strong>Certificate</strong> No. Z00037) withoutany changes.The product has not been tested separately.The manufacturer declares that the hardware and s<strong>of</strong>tware used in this product iscompliant to IEC 61784-1 (Ed.2.0) CP 16/2 (formerly IEC 61491) as well as thePackaging Pr<strong>of</strong>ile Extended.This certificate is submitted on the basis <strong>of</strong> SERCOS International’s guidelines fortesting and certification.Stuttgart, 03/03 2008(Seal)Peter Lutz(Official in charge)
Transfer <strong>of</strong> <strong>Certificate</strong> <strong>of</strong><strong>Product</strong> <strong>Conformance</strong>SERCOS International e.V. (SI) hereby issues thisDeclaration <strong>of</strong> Conformity (<strong>Certificate</strong> No. VZ1.0034)for the following product:<strong>Product</strong> Name:S703Vendor Name:Danaher Motion GmbHVendor Site:Duesseldorf, GermanyHardware Version: 05_21Firmware Version: 3.00This certificate confirms that this product uses already successfully certifiedprotocol s<strong>of</strong>tware and communication hardware (<strong>Certificate</strong> No. Z00037) withoutany changes.The product has not been tested separately.The manufacturer declares that the hardware and s<strong>of</strong>tware used in this product iscompliant to IEC 61784-1 (Ed.2.0) CP 16/2 (formerly IEC 61491) as well as thePackaging Pr<strong>of</strong>ile Extended.This certificate is submitted on the basis <strong>of</strong> SERCOS International’s guidelines fortesting and certification.Stuttgart, 03/03 2008(Seal)Peter Lutz(Official in charge)
Transfer <strong>of</strong> <strong>Certificate</strong> <strong>of</strong><strong>Product</strong> <strong>Conformance</strong>SERCOS International e.V. (SI) hereby issues thisDeclaration <strong>of</strong> Conformity (<strong>Certificate</strong> No. VZ1.0033)for the following product:<strong>Product</strong> Name:S712Vendor Name:Danaher Motion GmbHVendor Site:Duesseldorf, GermanyHardware Version: 05_21Firmware Version: 3.00This certificate confirms that this product uses already successfully certifiedprotocol s<strong>of</strong>tware and communication hardware (<strong>Certificate</strong> No. Z00037) withoutany changes.The product has not been tested separately.The manufacturer declares that the hardware and s<strong>of</strong>tware used in this product iscompliant to IEC 61784-1 (Ed.2.0) CP 16/2 (formerly IEC 61491) as well as thePackaging Pr<strong>of</strong>ile Extended.This certificate is submitted on the basis <strong>of</strong> SERCOS International’s guidelines fortesting and certification.Stuttgart, 03/03 2008(Seal)Peter Lutz(Official in charge)
Transfer <strong>of</strong> <strong>Certificate</strong> <strong>of</strong><strong>Product</strong> <strong>Conformance</strong>SERCOS International e.V. (SI) hereby issues thisDeclaration <strong>of</strong> Conformity (<strong>Certificate</strong> No. VZ1.0032)for the following product:<strong>Product</strong> Name:S724Vendor Name:Danaher Motion GmbHVendor Site:Duesseldorf, GermanyHardware Version: 05_21Firmware Version: 3.00This certificate confirms that this product uses already successfully certifiedprotocol s<strong>of</strong>tware and communication hardware (<strong>Certificate</strong> No. Z00037) withoutany changes.The product has not been tested separately.The manufacturer declares that the hardware and s<strong>of</strong>tware used in this product iscompliant to IEC 61784-1 (Ed.2.0) CP 16/2 (formerly IEC 61491) as well as thePackaging Pr<strong>of</strong>ile Extended.This certificate is submitted on the basis <strong>of</strong> SERCOS International’s guidelines fortesting and certification.Stuttgart, 03/03 2008(Seal)Peter Lutz(Official in charge)
Change language