Honda TRX 450 (06 - 07) Slip-On Exhaust System - Akrapovic

Akrapovic Slip-On Exhaust Systemfor the Honda TRX 450 (2006 - 2007)With the Akrapovic Slip-On system we wanted to design a base-level exhaustsystem tuning component for TRX enthusiasts. The system is an excellent combinationof performance, quality workmanship and affordability. The AkrapovicSLIP-ON is designed for two markets: for the US market it is equipped with anapproved spark arrester, and for the EU and other non-US markets it comeswith a noise damper.PERFORMANCEMeasurements of the Akrapovic SLIP-ON system on the ATV HONDA TRX 450(without noise damper or spark arrester):Power & Torque: the advantage of the Akrapovic Slip-On can be felt most clearly atthe bottom end and in the middle of the rpm range, where the increases in powerand torque are the greatest. At the top of the range the Akrapovic curves follow thestock curves, with an increase appearing again in the overrev range. At 7700 rpm wemeasured a healthy 38.1 HP.max. rear wheel powerHP / rpm(measured on Dynojet ATV)CONFIGURATIONinterference crossovertubesPERFORMANCEstock AKRAPOVIC max. increased power37.6 / 7500 38.1 / 7700 2.9 / 3800- lambda sensor -header tube inner sleeves - header tube flanges -header tubes - collectorconnectionlink pipe - mufflerconnection-WELDEDCONFIGURATIONheader tubes collector link pipematerial - - STAINLESS STEELtube shape - - CYLINDRICALcollector / header tube -link pipe connectionmufflerinlet cap /outlet capSLEEVE JOINT +METAL CLAMPSTAINLESS STEEL /STAINLESS STEELDescriptionAkrapovic Exhaust System Technology copyright 2005, all rights reservedATV SeriesCONFIGURATIONThe system is composed of a cylindrical stainless steel link pipe which is welded tothe muffler. It is attached to the stock header assembly with a sleeve joint, which issecured with a metal clamp. The muffler is the offroad design, with a titanium outersleeve, and the inlet cap, outlet cap and inner perforated sleeve made of stainlesssteel. The muffler is attached to the frame with an Akrapovic carbon-fiber clamp. Thesystem is equipped with an approved spark arrester for the US market, and a noisedamper for the EU market.muffler metal interior STAINLESS STEEL muffler outer sleeve TITANIUMmuffler clamp CARBON-FIBER OFF ROAD muffler bracket -muffler insertweight comparison(kg)noisemeasurements(dB / rpm)possibility of periodicservice without removingA.E.S.legal for street useEU NOISE DAMPER heat shield -US SPARK ARRESTER catalytic converter -stock3.55S.S. lnk pipestockADDITIONAL DATAAKRAPOVICTITANIUMlink pipestock -S.S. link pipedifferencestock -TI link pipe1.85 - 1.70 -AKRAPOVIC90.7 / 3750 98.2 / 3750 (without noise damper)94.6 / 3750 (with noise damper - tuv 37)oilYESTechnical specifications of Akrapovic exhaust systems and related products subject to change without notice.NOoil filterYESProduct code: 106712 (AS-H4SO3-DT) EU market106713 (AS-H4ASO3-DTA) US market2www.akrapovic-exhaust.com