DN 100 - 1200 mm - Bauernfeind GmbH

More documents

Recommendations

Info

Connections to manholesWhen connecting PP-MEGA-Pipes to manholes or for wall ductsthe PP-MEGA-shaft-lining with or without a stop should be used.For connections to manholes or for wall ducts you have tomake sure that an appropriate bearing surface is available.If this is not possible you have to install a flexible connection.For the flexible connection you may cut off a short piece of pipewith ≤1000mm length and then connect it with a connectionsocket with the existing pipe. With this connection therequired flexibility is given.Side branchesPVC-pipes DN 110 – 200 can be connected afterwards toPP-MEGA-Pipes (from DN/ID 300) easily and quickly with a lateralconnector.lateral connectorThe main pipeline is centrally drilled with a holesaw and the boreholeis then fettled inside and outside. The flexible lateral connector isinserted into the borehole of the main pipe.Afterwards the tension band is placed around the lateral connector,and the insertion depth is marked at the connecting pipe. The sealingand the connecting pipe should be lubricated to facilitate the insertionof the pipe. After the insertion the tension band istightened with 6 Nm. The indication on the tension band has todisappear completely.holesawCleaning of the pipelinePP-MEGA-Pipes, PP-MEGA-Drain and fittings can be rinsed with high pressure. The flushingpressure at the nozzle should not exceed 120 bar and the water jet should be positioned atleast 45 degrees backwards.A mechanical cleaning with chains, mills and other tools is not permitted.
18Plastic manholessuitable for all pipes of the series: PP-MEGA and PP-WELLThe plastic manholes of polyethylene assure a security againstgroundwater and ensure a maximum level of tightness.Advantages of the plastic manhole:• Long durability• Security against groundwater• Easy handling during transport and installationdue to the low weight• Quick and easy installation of the manhole at the construction site• Flexible and easy connection possibilitiesSewage manholeAt the manholes with 3 inlets, the lateral inlets are slightlyheightened. With a crown drill and a water seal additionalconnections can be made quickly and easily anywhere at themanhole.Technical data:manhole bottom:inlet:outlet:manhole height:manhole cover:capacity:Ø 600 , 800, 1000 mmØ 150, 200, 250, 350, 400 mmØ 150, 200, 250, 350, 400 mmfrom 500 mmØ 625 mm150 – 400 kNInspection manholeThese manholes are used for our piping system for inspection or cleaning purposes.Technical data:manhole bottom:inlet:outlet:manhole height:manhole cover:capacity:Ø 600, 800, 1000 mmØ 200 - 1000 mmØ 200 - 1000 mmfrom 500 mmØ 625 mm150 – 400 kN
Page 1: englishThe Austrian pipe producerPP
Page 5 and 6: PP-MEGA-Drain DN/ID 100 - 1200 mmPe
Page 7 and 8: PP-MEGA-E DN/ID 200 mmgeothermal he
Page 9 and 10: end caps100 mm 300 mm 600 mm150 mm
Page 11 and 12: Hydraulic behaviorThe PP-MEGA-Pipe
Page 13 and 14: Ring flexibilityAccording to the re
Page 15: Installation of PP-MEGA-PipesFrom D
Page 19 and 20: Service of the company Bauernfeind

DN 100 - 1200 mm - Bauernfeind GmbH

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?