Installation, Operation & Maintenance Manual - Acme Fluid Handling

More documents

Recommendations

Info

Appendix F—91 and F91 Head and Valve Assembly Details91 Head Assembly35Valve Holddown Assemblies5516677674F91 Head Assembly11811911103SuctionSpec 3SuctionSpec 4DischargeAll Specs212Valve Assemblies1341415241620172125182226192327Suction ValveSpec 350Suction ValveSpec 4Discharge ValveAll Specs
Appendix F—91 and F91 Head and Valve Assembly DetailsHead and Valve Bill of MaterialsRef PartNo. No. Description1. 2374 Head model 912374-X a Head assy. for model 91 (spec 3)2374-X1 Head assy. for model 91 (spec 4)2. 4302 Head model F91 (ANSI flange)3. 7001-037 NC100A Bolt, 3/8-16 x 1" Gr.5 hex head4. 2-235_ c O-ring5. 2714-1 Valve cap6. 2-031_ c O-ring7. 2715 Holddown screw8. 3483-1X Suction valve assy. (spec 3)3483-1X1 b Same as above but with copper gaskets3483-1X2 b Same as above but with iron-lead gaskets9. 3483-X Suction valve assy. (spec 4)3483-X1 b Same as above but with copper gaskets3483-X2 b Same as above but with iron-lead gaskets10. 3485-X Discharge valve assy. (all specs)3485-X1 b Same as above but with copper gaskets3485-X2 b Same as above but with iron-lead gaskets11. 2717 Valve gasket (aluminum)2717-1 b Valve gasket (copper)2717-2 b Valve gasket (iron-lead)12. 5000-77 Retainer ring (spec 3)13. 3977 Suction valve relief housing14. 1411 Spring (spec 3)15. 1410 Ball (spec 3)16. 3483-1 Suction valve seat (spec 3)17. 3972 Suction valve plate (spec 3)18. 4009 Suction spring (spec 3)19. 3484 Suction valve bumper (spec 3)20. 3483 Suction valve seat (spec 4)21. 3972 Suction valve plate (spec 4)22. 4009 Suction spring (spec 4)23. 3484 Suction valve bumper (spec 4)24. 3486 Discharge valve bumper25. 4008 Discharge spring26. 3973 Discharge valve plate27. 3485 Discharge valve seatO-ring CodeA Buna-Na Not shown.b Optionalc _ denotes O-ring code. See O-ring chart to the left for details.d Registered trademarks of the DuPont company.B Neoprene ®d 51CAUTION: Always Relieve Pressure In The Unit Before Attempting Any Repairs.
Page 5 and 6: this by withdrawing vapors from the
Page 7 and 8: Corken’s automatically reversible
Page 10 and 11: 2.4 Liquid TrapsCompressors are des
Page 12 and 13: 2.5 Driver Installation / Flywheels
Page 14 and 15: Chapter 3—Starting Up Your Corken
Page 16 and 17: Chapter 4—Routine Maintenance Cha
Page 18 and 19: Disassembly1. Unscrew the valve cap
Page 20 and 21: of damage to cylinders is corrosion
Page 22 and 23: 5. Push down on washer and insert r
Page 24 and 25: 5.9 Servicing the Four-Way ValveUnl
Page 26 and 27: Appendix AVertical Single-Acting Mo
Page 28 and 29: Appendix B—Vertical Single-Acting
Page 34 and 35: Appendix C—Compressor SelectionCo
Page 36 and 37: Appendix C—Compressor SelectionPr
Page 38 and 39: Appendix D—Outline DimensionsMode
Page 42 and 43: AUTOMATIC LIQUID TRAPLIQUID LEVEL S
Page 52 and 53: Appendix F—91 and F91 Piston Asse
Page 54 and 55: Appendix F—91 and F91 Connecting
Page 56 and 57: Appendix F—91 and F91 Crankcase A
Page 58 and 59: Appendix G—291 and F291 Head and
Page 60 and 61: Appendix G—291 and F291 Piston As
Page 62 and 63: Appendix G—291 and F291 Connectin
Page 64 and 65: Appendix G—291 and F291 Crankcase
Page 66 and 67: Appendix H—490, 491, and F491 Hea
Page 68 and 69: Appendix H—490, 491, and F491 Pis
Page 70 and 71: Appendix H—490, 491, and F491 Con
Page 72 and 73: Appendix H—490, 491, and F491 Cra
Page 74 and 75: Appendix I—691 and F691 Head and
Page 76 and 77: Appendix I—691 and F691 Piston As
Page 78 and 79: Appendix I—691 and F691 Connectin
Page 80 and 81: Appendix I—691 and F691 Crankcase
Page 82 and 83: Appendix J—D891 Head and Valve As
Page 84 and 85: Appendix J—D891 Crosshead Guide A
Page 86 and 87: Appendix J—D891 Connecting Rod As
Page 88 and 89: Appendix J—D891 Crankcase Assembl
Page 90: CORKEN, INC. • A Unit of IDEX Cor

Installation, Operation & Maintenance Manual - Acme Fluid Handling

Create successful ePaper yourself

Delete template?

Save as template?