Heating with air and geothermal heat - Viessmann

Domestic ventilationsystemsVitovent 300-FIdeally matched to compact Vitocal heat pumpsVitovent 300-FThe Vitovent 300-F domestic ventilationunit was developed for combination witha compact Vitocal air or brine heat pump.This enables the heat pump to be preciselyselected according to the required heat load.The heating output levels of the heat pumpsare between 3.0 to 10.6 kW (split heat pumps)or 5.9 to 10.3 kW (brine/water heat pumps).This makes the system suitable for livingareas of up to approx. 200 m 2 .The Vitovent 300-F ventilation unit isespecially suitable for new build, as allfunctions are possible in the smallestof spaces, such as ventilation and – inconjunction with a split Vitocal air source heatpump for example – heating, active coolingand DHW heating.It goes without saying that the Vitovent 300-Fmeets the standards of the Passive HouseInstitute and has Passive House Certification.Up to 97 percent heat recoveryThe Vitovent 300-F ventilation unit claws backup to 97 percent of the latent heat in extractair, using it to heat the incoming outdoor air.High operating convenienceAll that is required for operation is an electricalconnection to the heat pump – all the settingsare made via the Vitotronic 200 heat pumpcontrol unit.Minimum space requirementThe space the unit requires is exceptionallysmall. Sited to the right or left of a Vitocal heatpump, a well matched unit is created whichtakes up just 0.68 m 2 installation area.2157463Vitovent 300-FDomestic ventilation system withheat recovery1 Fan2 Extract air filter3 Supply air filter4 Heat exchanger5 Active filter monitoring6 Buffer cylinder (optional for passive houseair tempering)7 Reheater bank (optional for passive houseair tempering)